From 1213849357d3ebee5d51535a5d9f4a3e825798c7 Mon Sep 17 00:00:00 2001 From: Konstantin Koslowski Date: Fri, 31 Dec 2021 14:01:11 +0100 Subject: [PATCH] print: update --- ....2mm-0.4nozzle.ini => xk-v2_0.4N_0.2L.ini} | 12 +- ...uality.ini => xk-v2_0.4N_0.2L_quality.ini} | 18 +- print/xk-v2_0.6N_0.3L.ini | 233 ++++++++++++++++++ print/xk-v2_0.8N_0.4L.ini | 233 ++++++++++++++++++ 4 files changed, 483 insertions(+), 13 deletions(-) rename print/{xk_0.2mm-0.4nozzle.ini => xk-v2_0.4N_0.2L.ini} (95%) rename print/{xk_0.2mm-0.4nozzle-quality.ini => xk-v2_0.4N_0.2L_quality.ini} (94%) create mode 100644 print/xk-v2_0.6N_0.3L.ini create mode 100644 print/xk-v2_0.8N_0.4L.ini diff --git a/print/xk_0.2mm-0.4nozzle.ini b/print/xk-v2_0.4N_0.2L.ini similarity index 95% rename from print/xk_0.2mm-0.4nozzle.ini rename to print/xk-v2_0.4N_0.2L.ini index 16f00b9..c20a6b6 100644 --- a/print/xk_0.2mm-0.4nozzle.ini +++ b/print/xk-v2_0.4N_0.2L.ini @@ -1,4 +1,4 @@ -# generated by SuperSlicer 2.3.57 on 2021-11-21 at 15:06:29 UTC +# generated by SuperSlicer 2.3.57 on 2021-12-30 at 20:13:01 UTC allow_empty_layers = 0 avoid_crossing_not_first_layer = 1 avoid_crossing_perimeters = 0 @@ -10,6 +10,7 @@ bridge_acceleration = 3000 bridge_angle = 0 bridge_flow_ratio = 100% bridge_overlap = 100% +bridge_overlap_min = 80% bridge_speed = 60 bridge_speed_internal = 150% bridged_infill_margin = 200% @@ -127,7 +128,7 @@ only_one_perimeter_top = 1 only_one_perimeter_top_other_algo = 0 only_retract_when_crossing_perimeters = 1 ooze_prevention = 0 -output_filename_format = {input_filename_base}_{nozzle_diameter[0]}N_{layer_height}L_{extrusion_multiplier}E_{filament_type[0]}_{print_time}.gcode +output_filename_format = {input_filename_base}_{nozzle_diameter[0]}N_{layer_height}L_{fill_density}F_{extrusion_multiplier}E_{filament_type[0]}_{print_time}.gcode over_bridge_flow_ratio = 120% overhangs_reverse = 0 overhangs_reverse_threshold = 250% @@ -144,7 +145,7 @@ perimeter_loop_seam = rear perimeter_overlap = 100% perimeter_round_corners = 0 perimeter_speed = 120 -perimeters = 4 +perimeters = 3 post_process = print_custom_variables = print_extrusion_multiplier = 100% @@ -154,6 +155,7 @@ print_settings_id = xk_0.2mm-0.4nozzle print_temperature = 0 raft_layers = 0 resolution = 0.002 +resolution_internal = 0.2 seam_angle_cost = 100% seam_position = aligned seam_travel_cost = 100% @@ -225,7 +227,7 @@ wipe_tower_brim = 80% wipe_tower_no_sparse_layers = 1 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 -wipe_tower_x = 30.6406 -wipe_tower_y = 105.997 +wipe_tower_x = 30 +wipe_tower_y = 30 xy_inner_size_compensation = 0 xy_size_compensation = 0 diff --git a/print/xk_0.2mm-0.4nozzle-quality.ini b/print/xk-v2_0.4N_0.2L_quality.ini similarity index 94% rename from print/xk_0.2mm-0.4nozzle-quality.ini rename to print/xk-v2_0.4N_0.2L_quality.ini index 367fe64..34c1622 100644 --- a/print/xk_0.2mm-0.4nozzle-quality.ini +++ b/print/xk-v2_0.4N_0.2L_quality.ini @@ -1,4 +1,4 @@ -# generated by SuperSlicer 2.3.57 on 2021-11-22 at 21:09:59 UTC +# generated by SuperSlicer 2.3.57 on 2021-11-26 at 08:13:50 UTC allow_empty_layers = 0 avoid_crossing_not_first_layer = 1 avoid_crossing_perimeters = 0 @@ -10,6 +10,7 @@ bridge_acceleration = 3000 bridge_angle = 0 bridge_flow_ratio = 100% bridge_overlap = 100% +bridge_overlap_min = 80% bridge_speed = 60 bridge_speed_internal = 150% bridged_infill_margin = 200% @@ -44,7 +45,7 @@ external_perimeter_cut_corners = 0% external_perimeter_extrusion_spacing = external_perimeter_extrusion_width = 100% external_perimeter_overlap = 100% -external_perimeter_speed = 60 +external_perimeter_speed = 50% external_perimeters_first = 0 external_perimeters_hole = 1 external_perimeters_nothole = 1 @@ -65,9 +66,9 @@ fill_smooth_width = 50% fill_top_flow_ratio = 100% first_layer_acceleration = 2000 first_layer_extrusion_spacing = -first_layer_extrusion_width = 105% +first_layer_extrusion_width = 120% first_layer_flow_ratio = 100% -first_layer_height = 60% +first_layer_height = 75% first_layer_infill_speed = 60 first_layer_min_speed = 0 first_layer_size_compensation = -0.1 @@ -127,7 +128,7 @@ only_one_perimeter_top = 1 only_one_perimeter_top_other_algo = 0 only_retract_when_crossing_perimeters = 1 ooze_prevention = 0 -output_filename_format = {input_filename_base}_{nozzle_diameter[0]}N_{layer_height}L_{extrusion_multiplier}E_{filament_type[0]}_{print_time}.gcode +output_filename_format = {input_filename_base}_{nozzle_diameter[0]}N_{layer_height}L_{fill_density}F_{extrusion_multiplier}E_{filament_type[0]}_{print_time}.gcode over_bridge_flow_ratio = 120% overhangs_reverse = 0 overhangs_reverse_threshold = 250% @@ -144,7 +145,7 @@ perimeter_loop_seam = rear perimeter_overlap = 100% perimeter_round_corners = 0 perimeter_speed = 90 -perimeters = 4 +perimeters = 3 post_process = print_custom_variables = print_extrusion_multiplier = 100% @@ -154,6 +155,7 @@ print_settings_id = xk_0.2mm-0.4nozzle print_temperature = 0 raft_layers = 0 resolution = 0.002 +resolution_internal = 0.2 seam_angle_cost = 100% seam_position = aligned seam_travel_cost = 100% @@ -225,7 +227,7 @@ wipe_tower_brim = 80% wipe_tower_no_sparse_layers = 1 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 -wipe_tower_x = 56.5035 -wipe_tower_y = 103.036 +wipe_tower_x = 30 +wipe_tower_y = 30 xy_inner_size_compensation = 0 xy_size_compensation = 0 diff --git a/print/xk-v2_0.6N_0.3L.ini b/print/xk-v2_0.6N_0.3L.ini new file mode 100644 index 0000000..f8ecd4a --- /dev/null +++ b/print/xk-v2_0.6N_0.3L.ini @@ -0,0 +1,233 @@ +# generated by SuperSlicer 2.3.57 on 2021-11-25 at 21:44:56 UTC +allow_empty_layers = 0 +avoid_crossing_not_first_layer = 1 +avoid_crossing_perimeters = 0 +avoid_crossing_perimeters_max_detour = 0 +bottom_fill_pattern = monotonic +bottom_solid_layers = 3 +bottom_solid_min_thickness = 0 +bridge_acceleration = 3000 +bridge_angle = 0 +bridge_flow_ratio = 100% +bridge_overlap = 100% +bridge_overlap_min = 80% +bridge_speed = 60 +bridge_speed_internal = 150% +bridged_infill_margin = 200% +brim_ears = 0 +brim_ears_detection_length = 1 +brim_ears_max_angle = 120 +brim_ears_pattern = concentric +brim_inside_holes = 0 +brim_offset = 0 +brim_width = 0 +brim_width_interior = 0 +clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.6 +complete_objects = 0 +complete_objects_one_brim = 0 +complete_objects_one_skirt = 0 +complete_objects_sort = object +curve_smoothing_angle_concave = 0 +curve_smoothing_angle_convex = 0 +curve_smoothing_cutoff_dist = 2 +curve_smoothing_precision = 0 +default_acceleration = 3000 +dont_support_bridges = 1 +draft_shield = 0 +duplicate_distance = 5 +enforce_full_fill_volume = 1 +ensure_vertical_shell_thickness = 1 +exact_last_layer_height = 0 +external_infill_margin = 150% +external_perimeter_cut_corners = 0% +external_perimeter_extrusion_spacing = +external_perimeter_extrusion_width = 100% +external_perimeter_overlap = 100% +external_perimeter_speed = 50% +external_perimeters_first = 0 +external_perimeters_hole = 1 +external_perimeters_nothole = 1 +external_perimeters_vase = 0 +extra_perimeters = 0 +extra_perimeters_odd_layers = 0 +extra_perimeters_overhangs = 0 +extruder_clearance_height = 2 +extruder_clearance_radius = 50 +extrusion_spacing = +extrusion_width = 100% +fill_angle = 45 +fill_angle_increment = 0 +fill_density = 13% +fill_pattern = gyroid +fill_smooth_distribution = 14% +fill_smooth_width = 50% +fill_top_flow_ratio = 100% +first_layer_acceleration = 2000 +first_layer_extrusion_spacing = +first_layer_extrusion_width = 105% +first_layer_flow_ratio = 100% +first_layer_height = 60% +first_layer_infill_speed = 60 +first_layer_min_speed = 0 +first_layer_size_compensation = -0.1 +first_layer_size_compensation_layers = 1 +first_layer_speed = 40 +gap_fill = 1 +gap_fill_last = 1 +gap_fill_min_area = 100% +gap_fill_overlap = 100% +gap_fill_speed = 40 +gcode_comments = 0 +gcode_label_objects = 1 +hole_size_compensation = -0.05 +hole_size_threshold = 100 +hole_to_polyhole = 0 +hole_to_polyhole_threshold = 0.01 +hole_to_polyhole_twisted = 1 +infill_acceleration = 3000 +infill_anchor = 600% +infill_anchor_max = 0 +infill_connection = connected +infill_connection_bottom = connected +infill_connection_solid = connected +infill_connection_top = connected +infill_dense = 1 +infill_dense_algo = autosmall +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_spacing = +infill_extrusion_width = 120% +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 50% +infill_speed = 160 +inherits = +interface_shells = 0 +ironing = 0 +ironing_angle = -1 +ironing_flowrate = 15% +ironing_spacing = 0.1 +ironing_speed = 15 +ironing_type = top +layer_height = 0.3 +max_print_speed = 300 +max_volumetric_speed = 0 +milling_after_z = 200% +milling_extra_size = 150% +milling_post_process = 0 +milling_speed = 30 +min_skirt_length = 0 +min_width_top_surface = 200% +model_precision = 0.0001 +no_perimeter_unsupported_algo = none +notes = TODO: check the size of the extruder and the y-bar clearance. Optimize & test supports. +only_one_perimeter_first_layer = 0 +only_one_perimeter_top = 1 +only_one_perimeter_top_other_algo = 0 +only_retract_when_crossing_perimeters = 1 +ooze_prevention = 0 +output_filename_format = {input_filename_base}_{nozzle_diameter[0]}N_{layer_height}L_{fill_density}F_{extrusion_multiplier}E_{filament_type[0]}_{print_time}.gcode +over_bridge_flow_ratio = 120% +overhangs_reverse = 0 +overhangs_reverse_threshold = 250% +overhangs_speed = 40 +overhangs_width = 75% +overhangs_width_speed = 50% +perimeter_acceleration = 3000 +perimeter_bonding = 0% +perimeter_extruder = 1 +perimeter_extrusion_spacing = +perimeter_extrusion_width = 100% +perimeter_loop = 0 +perimeter_loop_seam = rear +perimeter_overlap = 100% +perimeter_round_corners = 0 +perimeter_speed = 120 +perimeters = 3 +post_process = +print_custom_variables = +print_extrusion_multiplier = 100% +print_retract_length = -1 +print_retract_lift = -1 +print_settings_id = xk_0.3mm-0.6nozzle +print_temperature = 0 +raft_layers = 0 +resolution = 0.002 +resolution_internal = 0.2 +seam_angle_cost = 100% +seam_position = aligned +seam_travel_cost = 100% +single_extruder_multi_material_priming = 0 +skirt_brim = 0 +skirt_distance = 3 +skirt_distance_from_brim = 1 +skirt_extrusion_width = 0 +skirt_height = 1 +skirts = 3 +slice_closing_radius = 0.049 +small_perimeter_max_length = 20 +small_perimeter_min_length = 6 +small_perimeter_speed = 30 +solid_fill_pattern = monotonic +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_spacing = +solid_infill_extrusion_width = 120% +solid_infill_speed = 80% +solid_over_perimeters = 2 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_auto = 1 +support_material_buildplate_only = 0 +support_material_contact_distance_bottom = 0.15 +support_material_contact_distance_top = 0.15 +support_material_contact_distance_type = filament +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 110% +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 0 +support_material_interface_layers = 1 +support_material_interface_pattern = sawtooth +support_material_interface_spacing = 0.3 +support_material_interface_speed = 70 +support_material_pattern = rectilinear +support_material_solid_first_layer = 1 +support_material_spacing = 2.5 +support_material_speed = 60 +support_material_synchronize_layers = 0 +support_material_threshold = 30 +support_material_with_sheath = 0 +support_material_xy_spacing = 75% +thin_perimeters = 1 +thin_perimeters_all = 0 +thin_walls = 1 +thin_walls_merge = 1 +thin_walls_min_width = 50% +thin_walls_overlap = 50% +thin_walls_speed = 30 +threads = 8 +top_fill_pattern = monotonic +top_infill_extrusion_spacing = +top_infill_extrusion_width = 100% +top_solid_infill_speed = 60% +top_solid_layers = 3 +top_solid_min_thickness = 0 +travel_acceleration = 1500 +travel_speed = 300 +travel_speed_z = 0 +wipe_tower = 1 +wipe_tower_bridging = 10 +wipe_tower_brim = 80% +wipe_tower_no_sparse_layers = 1 +wipe_tower_rotation_angle = 0 +wipe_tower_width = 60 +wipe_tower_x = 30 +wipe_tower_y = 30 +xy_inner_size_compensation = 0 +xy_size_compensation = 0 diff --git a/print/xk-v2_0.8N_0.4L.ini b/print/xk-v2_0.8N_0.4L.ini new file mode 100644 index 0000000..f46f522 --- /dev/null +++ b/print/xk-v2_0.8N_0.4L.ini @@ -0,0 +1,233 @@ +# generated by SuperSlicer 2.3.57 on 2021-11-25 at 21:43:22 UTC +allow_empty_layers = 0 +avoid_crossing_not_first_layer = 1 +avoid_crossing_perimeters = 0 +avoid_crossing_perimeters_max_detour = 0 +bottom_fill_pattern = monotonic +bottom_solid_layers = 3 +bottom_solid_min_thickness = 0 +bridge_acceleration = 3000 +bridge_angle = 0 +bridge_flow_ratio = 100% +bridge_overlap = 100% +bridge_overlap_min = 80% +bridge_speed = 60 +bridge_speed_internal = 150% +bridged_infill_margin = 200% +brim_ears = 0 +brim_ears_detection_length = 1 +brim_ears_max_angle = 120 +brim_ears_pattern = concentric +brim_inside_holes = 0 +brim_offset = 0 +brim_width = 0 +brim_width_interior = 0 +clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.8 +complete_objects = 0 +complete_objects_one_brim = 0 +complete_objects_one_skirt = 0 +complete_objects_sort = object +curve_smoothing_angle_concave = 0 +curve_smoothing_angle_convex = 0 +curve_smoothing_cutoff_dist = 2 +curve_smoothing_precision = 0 +default_acceleration = 3000 +dont_support_bridges = 1 +draft_shield = 0 +duplicate_distance = 5 +enforce_full_fill_volume = 1 +ensure_vertical_shell_thickness = 1 +exact_last_layer_height = 0 +external_infill_margin = 150% +external_perimeter_cut_corners = 0% +external_perimeter_extrusion_spacing = +external_perimeter_extrusion_width = 100% +external_perimeter_overlap = 100% +external_perimeter_speed = 50% +external_perimeters_first = 0 +external_perimeters_hole = 1 +external_perimeters_nothole = 1 +external_perimeters_vase = 0 +extra_perimeters = 0 +extra_perimeters_odd_layers = 0 +extra_perimeters_overhangs = 0 +extruder_clearance_height = 2 +extruder_clearance_radius = 50 +extrusion_spacing = +extrusion_width = 100% +fill_angle = 45 +fill_angle_increment = 0 +fill_density = 13% +fill_pattern = gyroid +fill_smooth_distribution = 14% +fill_smooth_width = 50% +fill_top_flow_ratio = 100% +first_layer_acceleration = 2000 +first_layer_extrusion_spacing = +first_layer_extrusion_width = 105% +first_layer_flow_ratio = 100% +first_layer_height = 60% +first_layer_infill_speed = 60 +first_layer_min_speed = 0 +first_layer_size_compensation = -0.1 +first_layer_size_compensation_layers = 1 +first_layer_speed = 40 +gap_fill = 1 +gap_fill_last = 1 +gap_fill_min_area = 100% +gap_fill_overlap = 100% +gap_fill_speed = 40 +gcode_comments = 0 +gcode_label_objects = 1 +hole_size_compensation = -0.05 +hole_size_threshold = 100 +hole_to_polyhole = 0 +hole_to_polyhole_threshold = 0.01 +hole_to_polyhole_twisted = 1 +infill_acceleration = 3000 +infill_anchor = 600% +infill_anchor_max = 0 +infill_connection = connected +infill_connection_bottom = connected +infill_connection_solid = connected +infill_connection_top = connected +infill_dense = 1 +infill_dense_algo = autosmall +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_spacing = +infill_extrusion_width = 120% +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 50% +infill_speed = 160 +inherits = +interface_shells = 0 +ironing = 0 +ironing_angle = -1 +ironing_flowrate = 15% +ironing_spacing = 0.1 +ironing_speed = 15 +ironing_type = top +layer_height = 0.4 +max_print_speed = 300 +max_volumetric_speed = 0 +milling_after_z = 200% +milling_extra_size = 150% +milling_post_process = 0 +milling_speed = 30 +min_skirt_length = 0 +min_width_top_surface = 200% +model_precision = 0.0001 +no_perimeter_unsupported_algo = none +notes = TODO: check the size of the extruder and the y-bar clearance. Optimize & test supports. +only_one_perimeter_first_layer = 0 +only_one_perimeter_top = 1 +only_one_perimeter_top_other_algo = 0 +only_retract_when_crossing_perimeters = 1 +ooze_prevention = 0 +output_filename_format = {input_filename_base}_{nozzle_diameter[0]}N_{layer_height}L_{fill_density}F_{extrusion_multiplier}E_{filament_type[0]}_{print_time}.gcode +over_bridge_flow_ratio = 120% +overhangs_reverse = 0 +overhangs_reverse_threshold = 250% +overhangs_speed = 40 +overhangs_width = 75% +overhangs_width_speed = 50% +perimeter_acceleration = 3000 +perimeter_bonding = 0% +perimeter_extruder = 1 +perimeter_extrusion_spacing = +perimeter_extrusion_width = 100% +perimeter_loop = 0 +perimeter_loop_seam = rear +perimeter_overlap = 100% +perimeter_round_corners = 0 +perimeter_speed = 120 +perimeters = 3 +post_process = +print_custom_variables = +print_extrusion_multiplier = 100% +print_retract_length = -1 +print_retract_lift = -1 +print_settings_id = xk_0.2mm-0.4nozzle +print_temperature = 0 +raft_layers = 0 +resolution = 0.002 +resolution_internal = 0.2 +seam_angle_cost = 100% +seam_position = aligned +seam_travel_cost = 100% +single_extruder_multi_material_priming = 0 +skirt_brim = 0 +skirt_distance = 3 +skirt_distance_from_brim = 1 +skirt_extrusion_width = 0 +skirt_height = 1 +skirts = 3 +slice_closing_radius = 0.049 +small_perimeter_max_length = 20 +small_perimeter_min_length = 6 +small_perimeter_speed = 30 +solid_fill_pattern = monotonic +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_spacing = +solid_infill_extrusion_width = 120% +solid_infill_speed = 80% +solid_over_perimeters = 2 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_auto = 1 +support_material_buildplate_only = 0 +support_material_contact_distance_bottom = 0.15 +support_material_contact_distance_top = 0.15 +support_material_contact_distance_type = filament +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 110% +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 0 +support_material_interface_layers = 1 +support_material_interface_pattern = sawtooth +support_material_interface_spacing = 0.4 +support_material_interface_speed = 70 +support_material_pattern = rectilinear +support_material_solid_first_layer = 1 +support_material_spacing = 2.5 +support_material_speed = 60 +support_material_synchronize_layers = 0 +support_material_threshold = 30 +support_material_with_sheath = 0 +support_material_xy_spacing = 75% +thin_perimeters = 1 +thin_perimeters_all = 0 +thin_walls = 1 +thin_walls_merge = 1 +thin_walls_min_width = 50% +thin_walls_overlap = 50% +thin_walls_speed = 30 +threads = 8 +top_fill_pattern = monotonic +top_infill_extrusion_spacing = +top_infill_extrusion_width = 100% +top_solid_infill_speed = 60% +top_solid_layers = 3 +top_solid_min_thickness = 0 +travel_acceleration = 1500 +travel_speed = 300 +travel_speed_z = 0 +wipe_tower = 1 +wipe_tower_bridging = 10 +wipe_tower_brim = 80% +wipe_tower_no_sparse_layers = 1 +wipe_tower_rotation_angle = 0 +wipe_tower_width = 60 +wipe_tower_x = 30 +wipe_tower_y = 30 +xy_inner_size_compensation = 0 +xy_size_compensation = 0