From 2cdfee0426d3189971083ccca6303582520efeee Mon Sep 17 00:00:00 2001 From: Konstantin Koslowski Date: Fri, 31 Dec 2021 13:59:47 +0100 Subject: [PATCH] filament: update --- filament/CR3D ABS.ini | 83 +++++++++++++++++++++++++++++++++++++++++++ filament/EsunABS+.ini | 17 ++++----- filament/PETG.ini | 82 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 174 insertions(+), 8 deletions(-) create mode 100644 filament/CR3D ABS.ini create mode 100644 filament/PETG.ini diff --git a/filament/CR3D ABS.ini b/filament/CR3D ABS.ini new file mode 100644 index 0000000..23e1f03 --- /dev/null +++ b/filament/CR3D ABS.ini @@ -0,0 +1,83 @@ +# generated by SuperSlicer 2.3.57 on 2021-12-31 at 12:57:30 UTC +bed_temperature = 100 +bridge_fan_speed = 55 +bridge_internal_fan_speed = -1 +chamber_temperature = 0 +compatible_printers = +compatible_printers_condition = +compatible_prints = +compatible_prints_condition = +cooling = 1 +disable_fan_first_layers = 2 +end_filament_gcode = "; Filament-specific end gcode EsunABS+" +external_perimeter_fan_speed = -1 +extrusion_multiplier = 0.94 +fan_always_on = 1 +fan_below_layer_time = 10 +filament_colour = #424242 +filament_cooling_final_speed = 50 +filament_cooling_initial_speed = 10 +filament_cooling_moves = 5 +filament_cooling_zone_pause = 0 +filament_cost = 20 +filament_custom_variables = "" +filament_density = 1.05 +filament_deretract_speed = nil +filament_diameter = 1.75 +filament_dip_extraction_speed = 70 +filament_dip_insertion_speed = 33 +filament_enable_toolchange_part_fan = 0 +filament_enable_toolchange_temp = 0 +filament_load_time = 30 +filament_loading_speed = 14 +filament_loading_speed_start = 19 +filament_max_overlap = 100% +filament_max_speed = 0 +filament_max_volumetric_speed = 25 +filament_max_wipe_tower_speed = 200 +filament_melt_zone_pause = 0 +filament_minimal_purge_on_wipe_tower = 150 +filament_notes = "" +filament_ramming_parameters = "120 110 5.56452 5.6129 5.69355 5.93548 6.5 7.29032 8.06452 8.72581 9.30645 9.79032 10.1129 10.2581| 0.05 5.56775 0.45 5.63874 0.95 6.05808 1.45 7.59034 1.95 8.95803 2.45 9.93557 2.95 10.3096 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" +filament_retract_before_travel = nil +filament_retract_before_wipe = nil +filament_retract_layer_change = nil +filament_retract_length = nil +filament_retract_lift = nil +filament_retract_lift_above = nil +filament_retract_lift_below = nil +filament_retract_restart_extra = nil +filament_retract_speed = nil +filament_seam_gap = nil +filament_settings_id = EsunABS+ +filament_shrink = 100% +filament_skinnydip_distance = 42 +filament_soluble = 0 +filament_spool_weight = 1000 +filament_toolchange_delay = 0 +filament_toolchange_part_fan_speed = 50 +filament_toolchange_temp = 240 +filament_type = ABS +filament_unload_time = 30 +filament_unloading_speed = 20 +filament_unloading_speed_start = 100 +filament_use_fast_skinnydip = 0 +filament_use_skinnydip = 1 +filament_vendor = Esun +filament_wipe = nil +filament_wipe_advanced_pigment = 0.4 +filament_wipe_extra_perimeter = nil +filament_wipe_only_crossing = nil +filament_wipe_speed = nil +first_layer_bed_temperature = 105 +first_layer_temperature = 250 +full_fan_speed_layer = 0 +inherits = +max_fan_speed = 50 +max_speed_reduction = 90% +min_fan_speed = 30 +min_print_speed = 15 +slowdown_below_layer_time = 20 +start_filament_gcode = "; Filament-specific start gcode EsunABS+\nM107 S{min_fan_speed}" +temperature = 250 +top_fan_speed = -1 diff --git a/filament/EsunABS+.ini b/filament/EsunABS+.ini index 2a704b7..9823a51 100644 --- a/filament/EsunABS+.ini +++ b/filament/EsunABS+.ini @@ -1,6 +1,6 @@ -# generated by SuperSlicer 2.3.57 on 2021-11-21 at 17:52:16 UTC +# generated by SuperSlicer 2.3.57 on 2021-12-08 at 21:46:02 UTC bed_temperature = 100 -bridge_fan_speed = 60 +bridge_fan_speed = 55 bridge_internal_fan_speed = -1 chamber_temperature = 0 compatible_printers = @@ -8,12 +8,12 @@ compatible_printers_condition = compatible_prints = compatible_prints_condition = cooling = 1 -disable_fan_first_layers = 3 +disable_fan_first_layers = 2 end_filament_gcode = "; Filament-specific end gcode EsunABS+" external_perimeter_fan_speed = -1 extrusion_multiplier = 0.95 -fan_always_on = 0 -fan_below_layer_time = 20 +fan_always_on = 1 +fan_below_layer_time = 10 filament_colour = #424242 filament_cooling_final_speed = 50 filament_cooling_initial_speed = 10 @@ -33,7 +33,7 @@ filament_loading_speed = 14 filament_loading_speed_start = 19 filament_max_overlap = 100% filament_max_speed = 0 -filament_max_volumetric_speed = 17 +filament_max_volumetric_speed = 25 filament_max_wipe_tower_speed = 200 filament_melt_zone_pause = 0 filament_minimal_purge_on_wipe_tower = 150 @@ -67,6 +67,7 @@ filament_vendor = Esun filament_wipe = nil filament_wipe_advanced_pigment = 0.4 filament_wipe_extra_perimeter = nil +filament_wipe_only_crossing = nil filament_wipe_speed = nil first_layer_bed_temperature = 105 first_layer_temperature = 250 @@ -74,9 +75,9 @@ full_fan_speed_layer = 0 inherits = max_fan_speed = 50 max_speed_reduction = 90% -min_fan_speed = 0 +min_fan_speed = 30 min_print_speed = 15 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "; Filament-specific start gcode EsunABS+\nM107 S{min_fan_speed}" temperature = 250 top_fan_speed = -1 diff --git a/filament/PETG.ini b/filament/PETG.ini new file mode 100644 index 0000000..e45a497 --- /dev/null +++ b/filament/PETG.ini @@ -0,0 +1,82 @@ +# generated by SuperSlicer 2.3.57 on 2021-12-24 at 20:09:22 UTC +bed_temperature = 75 +bridge_fan_speed = 100 +bridge_internal_fan_speed = -1 +chamber_temperature = 0 +compatible_printers = +compatible_printers_condition = +compatible_prints = +compatible_prints_condition = +cooling = 1 +disable_fan_first_layers = 0 +end_filament_gcode = "; Filament-specific end gcode PLA" +external_perimeter_fan_speed = -1 +extrusion_multiplier = 0.93 +fan_always_on = 1 +fan_below_layer_time = 20 +filament_colour = #15A800 +filament_cooling_final_speed = 50 +filament_cooling_initial_speed = 10 +filament_cooling_moves = 5 +filament_cooling_zone_pause = 0 +filament_cost = 20 +filament_custom_variables = "" +filament_density = 1.05 +filament_deretract_speed = nil +filament_diameter = 1.75 +filament_dip_extraction_speed = 70 +filament_dip_insertion_speed = 33 +filament_enable_toolchange_part_fan = 0 +filament_enable_toolchange_temp = 0 +filament_load_time = 30 +filament_loading_speed = 14 +filament_loading_speed_start = 19 +filament_max_overlap = 100% +filament_max_speed = 0 +filament_max_volumetric_speed = 17 +filament_max_wipe_tower_speed = 200 +filament_melt_zone_pause = 0 +filament_minimal_purge_on_wipe_tower = 150 +filament_notes = "" +filament_ramming_parameters = "120 110 5.56452 5.6129 5.69355 5.93548 6.5 7.29032 8.06452 8.72581 9.30645 9.79032 10.1129 10.2581| 0.05 5.56775 0.45 5.63874 0.95 6.05808 1.45 7.59034 1.95 8.95803 2.45 9.93557 2.95 10.3096 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" +filament_retract_before_travel = nil +filament_retract_before_wipe = nil +filament_retract_layer_change = nil +filament_retract_length = nil +filament_retract_lift = nil +filament_retract_lift_above = nil +filament_retract_lift_below = nil +filament_retract_restart_extra = nil +filament_retract_speed = nil +filament_seam_gap = nil +filament_settings_id = "Esun ABS+ _Ette_Pigm0.4" +filament_shrink = 100% +filament_skinnydip_distance = 42 +filament_soluble = 0 +filament_spool_weight = 0 +filament_toolchange_delay = 0 +filament_toolchange_part_fan_speed = 50 +filament_toolchange_temp = 240 +filament_type = PET +filament_unload_time = 30 +filament_unloading_speed = 20 +filament_unloading_speed_start = 100 +filament_use_fast_skinnydip = 0 +filament_use_skinnydip = 1 +filament_vendor = Esun +filament_wipe = nil +filament_wipe_advanced_pigment = 0.4 +filament_wipe_extra_perimeter = nil +filament_wipe_speed = nil +first_layer_bed_temperature = 80 +first_layer_temperature = 240 +full_fan_speed_layer = 0 +inherits = +max_fan_speed = 100 +max_speed_reduction = 90% +min_fan_speed = 100 +min_print_speed = 15 +slowdown_below_layer_time = 5 +start_filament_gcode = "; Filament-specific start gcode PLA\nM107 S{min_fan_speed}" +temperature = 230 +top_fan_speed = -1