diff --git a/printer/xk_v2_ercf.ini b/printer/xk-v2-ercf_0.4N.ini similarity index 89% rename from printer/xk_v2_ercf.ini rename to printer/xk-v2-ercf_0.4N.ini index 8bf3637..12a2369 100644 --- a/printer/xk_v2_ercf.ini +++ b/printer/xk-v2-ercf_0.4N.ini @@ -1,18 +1,18 @@ -# generated by SuperSlicer 2.3.57 on 2021-11-24 at 21:23:51 UTC +# generated by SuperSlicer 2.3.57 on 2021-12-28 at 15:56:23 UTC bed_custom_model = /home/koslowski/.config/SuperSlicer/printer/voron-v2-printbed_300.stl bed_custom_texture = /home/koslowski/.config/SuperSlicer/printer/voron-v2-printbed-logo-blue_300.png bed_shape = 0x0,300x0,300x300,0x300 -before_layer_gcode = ;BEFORE_LAYER_CHANGE [layer_z]\n\n +before_layer_gcode = ;BEFORE_LAYER_CHANGE [layer_z]\nTIMELAPSE_TAKE_FRAME\n\n between_objects_gcode = color_change_gcode = M600 cooling_tube_length = 15 cooling_tube_retraction = 35 -default_filament_profile = "EsunABS+" +default_filament_profile = EsunABS+ default_print_profile = xk_0.2mm-0.4nozzle deretract_speed = 0,0,0,0,0,0 end_gcode = print_end UNLOAD_AT_END=1 extra_loading_move = -51.8 -extruder_colour = #202020;#1C71D8;#C01C28;#26A269;#E5A50A;#FFFFFF +extruder_colour = #202020;#1C71D8;#C01C28;#26A269;#E5A50A;#F6F5F4 extruder_fan_offset = 0%,0%,0%,0%,0%,0% extruder_offset = 0x0,0x0,0x0,0x0,0x0,0x0 extruder_temperature_offset = 0,0,0,0,0,0 @@ -34,7 +34,7 @@ machine_limits_usage = time_estimate_only machine_max_acceleration_e = 10000 machine_max_acceleration_extruding = 1500 machine_max_acceleration_retracting = 1500 -machine_max_acceleration_travel = 1500,1250 +machine_max_acceleration_travel = 3000,1250 machine_max_acceleration_x = 9000 machine_max_acceleration_y = 9000 machine_max_acceleration_z = 500 @@ -89,7 +89,7 @@ retract_speed = 35,35,35,35,35,35 seam_gap = 15%,15%,15%,15%,15%,15% silent_mode = 0 single_extruder_multi_material = 1 -start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\nM140 S0\nprint_start BED=[first_layer_bed_temperature] EXTRUDER={first_layer_temperature[initial_extruder] + extruder_temperature_offset[initial_extruder]} CHAMBER=[chamber_temperature] QGL=0 BMC=0 PURGE=1 SOAK=0 Z_ADJUST=0 ERCF=1 ERCF_EXTRUDER={initial_extruder} +start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\nM140 S0\nprint_start BED=[first_layer_bed_temperature] EXTRUDER={first_layer_temperature[initial_extruder] + extruder_temperature_offset[initial_extruder]} SHEET=default BMC=0 PURGE=1 Z_ADJUST=0 ERCF=1 ERCF_EXTRUDER={initial_extruder} start_gcode_manual = 1 template_custom_gcode = thumbnails = 64x64,256x256 diff --git a/printer/xk_v2.ini b/printer/xk-v2_0.4N.ini similarity index 86% rename from printer/xk_v2.ini rename to printer/xk-v2_0.4N.ini index f250e50..58db14f 100644 --- a/printer/xk_v2.ini +++ b/printer/xk-v2_0.4N.ini @@ -1,13 +1,13 @@ -# generated by SuperSlicer 2.3.57 on 2021-11-24 at 21:23:40 UTC -bed_custom_model = /home/koslowski/.config/SuperSlicer/printer/voron-v2-printbed_300.stl -bed_custom_texture = /home/koslowski/.config/SuperSlicer/printer/voron-v2-printbed-logo-blue_300.png +# generated by SuperSlicer 2.3.57 on 2021-11-26 at 08:10:17 UTC +bed_custom_model = /home/konni/.config/SuperSlicer/printer/voron-v2-printbed_300.stl +bed_custom_texture = /home/konni/.config/SuperSlicer/printer/voron-v2-printbed-logo-blue_300.png bed_shape = 0x0,300x0,300x300,0x300 before_layer_gcode = ;BEFORE_LAYER_CHANGE [layer_z]\n\n between_objects_gcode = color_change_gcode = M600 cooling_tube_length = 15 cooling_tube_retraction = 35 -default_filament_profile = "EsunABS+" +default_filament_profile = EsunABS+ default_print_profile = xk_0.2mm-0.4nozzle deretract_speed = 0 end_gcode = print_end UNLOAD_AT_END=0 @@ -34,7 +34,7 @@ machine_limits_usage = time_estimate_only machine_max_acceleration_e = 10000 machine_max_acceleration_extruding = 1500 machine_max_acceleration_retracting = 1500 -machine_max_acceleration_travel = 1500,1250 +machine_max_acceleration_travel = 3000,1250 machine_max_acceleration_x = 9000 machine_max_acceleration_y = 9000 machine_max_acceleration_z = 500 @@ -49,7 +49,7 @@ machine_max_jerk_z = 0.2 machine_min_extruding_rate = 0 machine_min_travel_rate = 0 max_gcode_per_second = 1500 -max_layer_height = 0.3 +max_layer_height = 75% max_print_height = 290 milling_diameter = milling_toolchange_end_gcode = @@ -89,7 +89,7 @@ retract_speed = 35 seam_gap = 15% silent_mode = 0 single_extruder_multi_material = 1 -start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\nM140 S0\nprint_start BED=[first_layer_bed_temperature] EXTRUDER={first_layer_temperature[initial_extruder] + extruder_temperature_offset[initial_extruder]} CHAMBER=[chamber_temperature] QGL=0 BMC=0 PURGE=1 SOAK=0 Z_ADJUST=0 ERCF=0 ERCF_EXTRUDER={initial_extruder} +start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\nM140 S0\nprint_start BED=[first_layer_bed_temperature] EXTRUDER={first_layer_temperature[initial_extruder] + extruder_temperature_offset[initial_extruder]} SHEET=default BMC=0 PURGE=1 Z_ADJUST=0 ERCF=0 ERCF_EXTRUDER={initial_extruder} start_gcode_manual = 1 template_custom_gcode = thumbnails = 64x64,256x256 diff --git a/printer/xk-v2_0.6N.ini b/printer/xk-v2_0.6N.ini new file mode 100644 index 0000000..f40ad12 --- /dev/null +++ b/printer/xk-v2_0.6N.ini @@ -0,0 +1,115 @@ +# generated by SuperSlicer 2.3.57 on 2021-11-26 at 08:10:26 UTC +bed_custom_model = /home/konni/.config/SuperSlicer/printer/voron-v2-printbed_300.stl +bed_custom_texture = /home/konni/.config/SuperSlicer/printer/voron-v2-printbed-logo-blue_300.png +bed_shape = 0x0,300x0,300x300,0x300 +before_layer_gcode = ;BEFORE_LAYER_CHANGE [layer_z]\n\n +between_objects_gcode = +color_change_gcode = M600 +cooling_tube_length = 15 +cooling_tube_retraction = 35 +default_filament_profile = EsunABS+ +default_print_profile = xk_0.2mm-0.4nozzle +deretract_speed = 0 +end_gcode = print_end UNLOAD_AT_END=0 +extra_loading_move = -51.8 +extruder_colour = #202020 +extruder_fan_offset = 0% +extruder_offset = 0x0 +extruder_temperature_offset = 0 +fan_kickstart = 0 +fan_percentage = 0 +fan_speedup_overhangs = 1 +fan_speedup_time = 0 +feature_gcode = +gcode_filename_illegal_char = +gcode_flavor = klipper +gcode_precision_e = 5 +gcode_precision_xyz = 3 +high_current_on_filament_swap = 0 +host_type = octoprint +inherits = +layer_gcode = ;AFTER_LAYER_CHANGE [layer_z]\nprint_layer_change LAYER=[layer_num] LAYER_Z=[layer_z] TOTAL_LAYER_COUNT=[total_layer_count] +lift_min = 0 +machine_limits_usage = time_estimate_only +machine_max_acceleration_e = 10000 +machine_max_acceleration_extruding = 1500 +machine_max_acceleration_retracting = 1500 +machine_max_acceleration_travel = 3000,1250 +machine_max_acceleration_x = 9000 +machine_max_acceleration_y = 9000 +machine_max_acceleration_z = 500 +machine_max_feedrate_e = 120 +machine_max_feedrate_x = 500 +machine_max_feedrate_y = 500 +machine_max_feedrate_z = 12 +machine_max_jerk_e = 2.5 +machine_max_jerk_x = 10 +machine_max_jerk_y = 10 +machine_max_jerk_z = 0.2 +machine_min_extruding_rate = 0 +machine_min_travel_rate = 0 +max_gcode_per_second = 1500 +max_layer_height = 75% +max_print_height = 290 +milling_diameter = +milling_toolchange_end_gcode = +milling_toolchange_start_gcode = +milling_z_lift = +min_layer_height = 0.04 +min_length = 0.035 +nozzle_diameter = 0.6 +parking_pos_retraction = 52 +pause_print_gcode = M601 +print_host = +printer_custom_variables = +printer_model = Voron_v2_300_aferburner +printer_notes = Unoffical profile, for now.\nE3DV6 +printer_settings_id = xk_v2 +printer_technology = FFF +printer_variant = 0.4 +printer_vendor = +printhost_apikey = +printhost_cafile = +printhost_port = +remaining_times = 1 +remaining_times_type = m73 +retract_before_travel = 3 +retract_before_wipe = 0% +retract_layer_change = 0 +retract_length = 0.75 +retract_length_toolchange = 10 +retract_lift = 0.2 +retract_lift_above = 0 +retract_lift_below = 290 +retract_lift_first_layer = 0 +retract_lift_top = "All surfaces" +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 35 +seam_gap = 15% +silent_mode = 0 +single_extruder_multi_material = 1 +start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\nM140 S0\nprint_start BED=[first_layer_bed_temperature] EXTRUDER={first_layer_temperature[initial_extruder] + extruder_temperature_offset[initial_extruder]} SHEET=default BMC=0 PURGE=1 Z_ADJUST=0 ERCF=0 ERCF_EXTRUDER={initial_extruder} +start_gcode_manual = 1 +template_custom_gcode = +thumbnails = 64x64,256x256 +thumbnails_color = #018aff +thumbnails_custom_color = 0 +thumbnails_end_file = 0 +thumbnails_with_bed = 1 +time_estimation_compensation = 110% +tool_name = "" +toolchange_gcode = T[next_extruder] +use_firmware_retraction = 0 +use_relative_e_distances = 1 +use_volumetric_e = 0 +variable_layer_height = 1 +wipe = 0 +wipe_advanced = 1 +wipe_advanced_algo = quadra +wipe_advanced_multiplier = 60 +wipe_advanced_nozzle_melted_volume = 200 +wipe_extra_perimeter = 0 +wipe_speed = 0 +z_offset = 0.04 +z_step = 0.005 diff --git a/printer/xk-v2_0.8N.ini b/printer/xk-v2_0.8N.ini new file mode 100644 index 0000000..2048acb --- /dev/null +++ b/printer/xk-v2_0.8N.ini @@ -0,0 +1,115 @@ +# generated by SuperSlicer 2.3.57 on 2021-11-26 at 08:09:34 UTC +bed_custom_model = /home/konni/.config/SuperSlicer/printer/voron-v2-printbed_300.stl +bed_custom_texture = /home/konni/.config/SuperSlicer/printer/voron-v2-printbed-logo-blue_300.png +bed_shape = 0x0,300x0,300x300,0x300 +before_layer_gcode = ;BEFORE_LAYER_CHANGE [layer_z]\n\n +between_objects_gcode = +color_change_gcode = M600 +cooling_tube_length = 15 +cooling_tube_retraction = 35 +default_filament_profile = EsunABS+ +default_print_profile = xk_0.2mm-0.4nozzle +deretract_speed = 0 +end_gcode = print_end UNLOAD_AT_END=0 +extra_loading_move = -51.8 +extruder_colour = #202020 +extruder_fan_offset = 0% +extruder_offset = 0x0 +extruder_temperature_offset = 0 +fan_kickstart = 0 +fan_percentage = 0 +fan_speedup_overhangs = 1 +fan_speedup_time = 0 +feature_gcode = +gcode_filename_illegal_char = +gcode_flavor = klipper +gcode_precision_e = 5 +gcode_precision_xyz = 3 +high_current_on_filament_swap = 0 +host_type = octoprint +inherits = +layer_gcode = ;AFTER_LAYER_CHANGE [layer_z]\nprint_layer_change LAYER=[layer_num] LAYER_Z=[layer_z] TOTAL_LAYER_COUNT=[total_layer_count] +lift_min = 0 +machine_limits_usage = time_estimate_only +machine_max_acceleration_e = 10000 +machine_max_acceleration_extruding = 1500 +machine_max_acceleration_retracting = 1500 +machine_max_acceleration_travel = 3000,1250 +machine_max_acceleration_x = 9000 +machine_max_acceleration_y = 9000 +machine_max_acceleration_z = 500 +machine_max_feedrate_e = 120 +machine_max_feedrate_x = 500 +machine_max_feedrate_y = 500 +machine_max_feedrate_z = 12 +machine_max_jerk_e = 2.5 +machine_max_jerk_x = 10 +machine_max_jerk_y = 10 +machine_max_jerk_z = 0.2 +machine_min_extruding_rate = 0 +machine_min_travel_rate = 0 +max_gcode_per_second = 1500 +max_layer_height = 75% +max_print_height = 290 +milling_diameter = +milling_toolchange_end_gcode = +milling_toolchange_start_gcode = +milling_z_lift = +min_layer_height = 0.04 +min_length = 0.035 +nozzle_diameter = 0.8 +parking_pos_retraction = 52 +pause_print_gcode = M601 +print_host = +printer_custom_variables = +printer_model = Voron_v2_300_aferburner +printer_notes = Unoffical profile, for now.\nE3DV6 +printer_settings_id = xk_v2 +printer_technology = FFF +printer_variant = 0.4 +printer_vendor = +printhost_apikey = +printhost_cafile = +printhost_port = +remaining_times = 1 +remaining_times_type = m73 +retract_before_travel = 3 +retract_before_wipe = 0% +retract_layer_change = 0 +retract_length = 0.75 +retract_length_toolchange = 10 +retract_lift = 0.2 +retract_lift_above = 0 +retract_lift_below = 290 +retract_lift_first_layer = 0 +retract_lift_top = "All surfaces" +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 35 +seam_gap = 15% +silent_mode = 0 +single_extruder_multi_material = 1 +start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\nM140 S0\nprint_start BED=[first_layer_bed_temperature] EXTRUDER={first_layer_temperature[initial_extruder] + extruder_temperature_offset[initial_extruder]} SHEET=default BMC=0 PURGE=1 Z_ADJUST=0 ERCF=0 ERCF_EXTRUDER={initial_extruder} +start_gcode_manual = 1 +template_custom_gcode = +thumbnails = 64x64,256x256 +thumbnails_color = #018aff +thumbnails_custom_color = 0 +thumbnails_end_file = 0 +thumbnails_with_bed = 1 +time_estimation_compensation = 110% +tool_name = "" +toolchange_gcode = T[next_extruder] +use_firmware_retraction = 0 +use_relative_e_distances = 1 +use_volumetric_e = 0 +variable_layer_height = 1 +wipe = 0 +wipe_advanced = 1 +wipe_advanced_algo = quadra +wipe_advanced_multiplier = 60 +wipe_advanced_nozzle_melted_volume = 200 +wipe_extra_perimeter = 0 +wipe_speed = 0 +z_offset = 0.04 +z_step = 0.005 diff --git a/printer/xk_v2_quick.ini b/printer/xk_v2_quick.ini deleted file mode 100644 index b7a1a2e..0000000 --- a/printer/xk_v2_quick.ini +++ /dev/null @@ -1,3 +0,0 @@ -# foo -inherits = xk_v2 -printer_settings_id = xk_v2_quick