# generated by SuperSlicer 2.3.57 on 2021-11-26 at 08:09:34 UTC
bed_custom_model = /home/konni/.config/SuperSlicer/printer/voron-v2-printbed_300.stl
bed_custom_texture = /home/konni/.config/SuperSlicer/printer/voron-v2-printbed-logo-blue_300.png
bed_shape = 0x0,300x0,300x300,0x300
before_layer_gcode = ;BEFORE_LAYER_CHANGE [layer_z]\n\n
between_objects_gcode = 
color_change_gcode = M600
cooling_tube_length = 15
cooling_tube_retraction = 35
default_filament_profile = EsunABS+
default_print_profile = xk_0.2mm-0.4nozzle
deretract_speed = 0
end_gcode = print_end UNLOAD_AT_END=0
extra_loading_move = -51.8
extruder_colour = #202020
extruder_fan_offset = 0%
extruder_offset = 0x0
extruder_temperature_offset = 0
fan_kickstart = 0
fan_percentage = 0
fan_speedup_overhangs = 1
fan_speedup_time = 0
feature_gcode = 
gcode_filename_illegal_char = 
gcode_flavor = klipper
gcode_precision_e = 5
gcode_precision_xyz = 3
high_current_on_filament_swap = 0
host_type = octoprint
inherits = 
layer_gcode = ;AFTER_LAYER_CHANGE [layer_z]\nprint_layer_change LAYER=[layer_num] LAYER_Z=[layer_z] TOTAL_LAYER_COUNT=[total_layer_count]
lift_min = 0
machine_limits_usage = time_estimate_only
machine_max_acceleration_e = 10000
machine_max_acceleration_extruding = 1500
machine_max_acceleration_retracting = 1500
machine_max_acceleration_travel = 3000,1250
machine_max_acceleration_x = 9000
machine_max_acceleration_y = 9000
machine_max_acceleration_z = 500
machine_max_feedrate_e = 120
machine_max_feedrate_x = 500
machine_max_feedrate_y = 500
machine_max_feedrate_z = 12
machine_max_jerk_e = 2.5
machine_max_jerk_x = 10
machine_max_jerk_y = 10
machine_max_jerk_z = 0.2
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
max_gcode_per_second = 1500
max_layer_height = 75%
max_print_height = 290
milling_diameter = 
milling_toolchange_end_gcode = 
milling_toolchange_start_gcode = 
milling_z_lift = 
min_layer_height = 0.04
min_length = 0.035
nozzle_diameter = 0.8
parking_pos_retraction = 52
pause_print_gcode = M601
print_host = 
printer_custom_variables = 
printer_model = Voron_v2_300_aferburner
printer_notes = Unoffical profile, for now.\nE3DV6
printer_settings_id = xk_v2
printer_technology = FFF
printer_variant = 0.4
printer_vendor = 
printhost_apikey = 
printhost_cafile = 
printhost_port = 
remaining_times = 1
remaining_times_type = m73
retract_before_travel = 3
retract_before_wipe = 0%
retract_layer_change = 0
retract_length = 0.75
retract_length_toolchange = 10
retract_lift = 0.2
retract_lift_above = 0
retract_lift_below = 290
retract_lift_first_layer = 0
retract_lift_top = "All surfaces"
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 35
seam_gap = 15%
silent_mode = 0
single_extruder_multi_material = 1
start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\nM140 S0\nprint_start BED=[first_layer_bed_temperature] EXTRUDER={first_layer_temperature[initial_extruder] + extruder_temperature_offset[initial_extruder]} SHEET=default BMC=0 PURGE=1 Z_ADJUST=0 ERCF=0 ERCF_EXTRUDER={initial_extruder}
start_gcode_manual = 1
template_custom_gcode = 
thumbnails = 64x64,256x256
thumbnails_color = #018aff
thumbnails_custom_color = 0
thumbnails_end_file = 0
thumbnails_with_bed = 1
time_estimation_compensation = 110%
tool_name = ""
toolchange_gcode = T[next_extruder]
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 1
wipe = 0
wipe_advanced = 1
wipe_advanced_algo = quadra
wipe_advanced_multiplier = 60
wipe_advanced_nozzle_melted_volume = 200
wipe_extra_perimeter = 0
wipe_speed = 0
z_offset = 0.04
z_step = 0.005