initial commit
This commit is contained in:
commit
0136cc2dc3
3 changed files with 284 additions and 0 deletions
53
mainsail.cfg
Normal file
53
mainsail.cfg
Normal file
|
|
@ -0,0 +1,53 @@
|
|||
[virtual_sdcard]
|
||||
path: /home/pi/gcode_files
|
||||
|
||||
[pause_resume]
|
||||
|
||||
[display_status]
|
||||
|
||||
[gcode_macro CANCEL_PRINT]
|
||||
rename_existing: BASE_CANCEL_PRINT
|
||||
gcode:
|
||||
TURN_OFF_HEATERS
|
||||
CLEAR_PAUSE
|
||||
SDCARD_RESET_FILE
|
||||
BASE_CANCEL_PRINT
|
||||
|
||||
[gcode_macro PAUSE]
|
||||
rename_existing: BASE_PAUSE
|
||||
# change this if you need more or less extrusion
|
||||
variable_extrude: 1.0
|
||||
gcode:
|
||||
##### read E from pause macro #####
|
||||
{% set E = printer["gcode_macro PAUSE"].extrude|float %}
|
||||
##### set park positon for x and y #####
|
||||
# default is your max posion from your printer.cfg
|
||||
{% set x_park = printer.toolhead.axis_maximum.x|float - 5.0 %}
|
||||
{% set y_park = printer.toolhead.axis_maximum.y|float - 5.0 %}
|
||||
##### calculate save lift position #####
|
||||
{% set max_z = printer.toolhead.axis_maximum.z|float %}
|
||||
{% set act_z = printer.toolhead.position.z|float %}
|
||||
{% if act_z < (max_z - 2.0) %}
|
||||
{% set z_safe = 2.0 %}
|
||||
{% else %}
|
||||
{% set z_safe = max_z - act_z %}
|
||||
{% endif %}
|
||||
##### end of definitions #####
|
||||
SAVE_GCODE_STATE NAME=PAUSE_state
|
||||
BASE_PAUSE
|
||||
G91
|
||||
G1 E-{E} F2100
|
||||
G1 Z{z_safe} F900
|
||||
G90
|
||||
G1 X{x_park} Y{y_park} F6000
|
||||
|
||||
[gcode_macro RESUME]
|
||||
rename_existing: BASE_RESUME
|
||||
gcode:
|
||||
##### read E from pause macro #####
|
||||
{% set E = printer["gcode_macro PAUSE"].extrude|float %}
|
||||
##### end of definitions #####
|
||||
G91
|
||||
G1 E{E} F2100
|
||||
RESTORE_GCODE_STATE NAME=PAUSE_state
|
||||
BASE_RESUME
|
||||
35
moonraker.conf
Normal file
35
moonraker.conf
Normal file
|
|
@ -0,0 +1,35 @@
|
|||
[server]
|
||||
host: 0.0.0.0
|
||||
port: 7125
|
||||
enable_debug_logging: False
|
||||
config_path: ~/klipper_config
|
||||
|
||||
[authorization]
|
||||
enabled: True
|
||||
cors_domains:
|
||||
https://my.mainsail.xyz
|
||||
http://my.mainsail.xyz
|
||||
http://*.local
|
||||
http://*.lan
|
||||
trusted_clients:
|
||||
10.0.0.0/8
|
||||
127.0.0.0/8
|
||||
169.254.0.0/16
|
||||
172.16.0.0/12
|
||||
192.168.0.0/16
|
||||
FE80::/10
|
||||
::1/128
|
||||
|
||||
# enables partial support of Octoprint API
|
||||
[octoprint_compat]
|
||||
|
||||
# enables moonraker to track and store print history.
|
||||
[history]
|
||||
|
||||
# this enables moonraker's update manager
|
||||
[update_manager]
|
||||
|
||||
[update_manager client mainsail]
|
||||
type: web
|
||||
repo: meteyou/mainsail
|
||||
path: ~/mainsail
|
||||
196
printer.cfg
Normal file
196
printer.cfg
Normal file
|
|
@ -0,0 +1,196 @@
|
|||
# This file contains common configurations and pin mappings for the Prusa
|
||||
# Mini+, which uses the Prusa Buddy board.
|
||||
|
||||
# To use this config, the firmware should be compiled for the STM32F407. When
|
||||
# running "make menuconfig", enable "extra low-level configuration setup",
|
||||
# select the "128KiB + 512 byte offset" bootloader, and USB communication.
|
||||
# Connect the printer to your Raspberry Pi using the printer's micro-USB port.
|
||||
# If you prefer to remove Prusa's stock bootloader entirely, select the
|
||||
# "No bootloader" option.
|
||||
|
||||
# When flashing for the first time, you will need to break the "appendix"
|
||||
# on the Buddy board, then put the device into DFU mode by moving the jumper
|
||||
# on the 3-pin header (older boards) or shorting the 2-pin header (newer boards)
|
||||
# and resetting, and finally use "make flash" to install Klipper. Once Klipper is
|
||||
# installed, you no longer need the jumper - just use "make flash" which will
|
||||
# automatically put the device into DFU mode.
|
||||
|
||||
# Note that if you were previously running Prusa firmware, you must fully
|
||||
# power cycle the board after flashing. Otherwise, Klipper will be unable to
|
||||
# communicate with the TMC2209s due to the abrupt change in the baud rate,
|
||||
# and will show this error: "Unable to read tmc uart register IFCNT".
|
||||
|
||||
# See docs/Config_Reference.md for a description of parameters.
|
||||
|
||||
[pause_resume]
|
||||
|
||||
[display_status]
|
||||
|
||||
[virtual_sdcard]
|
||||
path: ~/gcode_files
|
||||
|
||||
|
||||
[stepper_x]
|
||||
step_pin: PD1
|
||||
dir_pin: PD0
|
||||
enable_pin: !PD3
|
||||
microsteps: 16
|
||||
rotation_distance: 32 # 200 * 16 / 100
|
||||
endstop_pin: tmc2209_stepper_x:virtual_endstop
|
||||
position_endstop: 180.4
|
||||
position_min: -2
|
||||
position_max: 180.4
|
||||
homing_speed: 50
|
||||
homing_retract_dist: 0
|
||||
|
||||
[stepper_y]
|
||||
step_pin: PD13
|
||||
dir_pin: PD12
|
||||
enable_pin: !PD14
|
||||
microsteps: 16
|
||||
rotation_distance: 32 # 200 * 16 / 100
|
||||
endstop_pin: tmc2209_stepper_y:virtual_endstop
|
||||
position_endstop: -3
|
||||
position_min: -3
|
||||
position_max: 180
|
||||
homing_speed: 50
|
||||
homing_retract_dist: 0
|
||||
|
||||
[stepper_z]
|
||||
step_pin: PD4
|
||||
dir_pin: !PD15
|
||||
enable_pin: !PD2
|
||||
microsteps: 16
|
||||
rotation_distance: 4
|
||||
endstop_pin: probe:z_virtual_endstop
|
||||
position_min: -3
|
||||
position_max: 185
|
||||
|
||||
[extruder]
|
||||
step_pin: PD9
|
||||
dir_pin: !PD8
|
||||
enable_pin: !PD10
|
||||
microsteps: 16
|
||||
rotation_distance: 26.2564 # (200 * 16 * 48/18) / 325
|
||||
gear_ratio: 48:18
|
||||
nozzle_diameter: 0.400
|
||||
filament_diameter: 1.750
|
||||
heater_pin: PB1
|
||||
sensor_type: ATC Semitec 104GT-2
|
||||
sensor_pin: PC0
|
||||
control: pid
|
||||
pid_Kp: 7
|
||||
pid_Ki: 0.5
|
||||
pid_Kd: 45
|
||||
min_temp: 10
|
||||
max_temp: 305
|
||||
|
||||
[tmc2209 stepper_x]
|
||||
uart_pin: PD5
|
||||
uart_address: 1
|
||||
diag_pin: ^PE2
|
||||
driver_SGTHRS: 130
|
||||
run_current: 0.35
|
||||
sense_resistor: 0.22
|
||||
stealthchop_threshold: 999999
|
||||
|
||||
[tmc2209 stepper_y]
|
||||
uart_pin: PD5
|
||||
uart_address: 3
|
||||
diag_pin: ^PE1
|
||||
driver_SGTHRS: 130
|
||||
run_current: 0.35
|
||||
sense_resistor: 0.22
|
||||
stealthchop_threshold: 999999
|
||||
|
||||
[tmc2209 stepper_z]
|
||||
uart_pin: PD5
|
||||
uart_address: 0
|
||||
diag_pin: ^PE3
|
||||
driver_SGTHRS: 100
|
||||
run_current: 0.35
|
||||
sense_resistor: 0.22
|
||||
stealthchop_threshold: 999999
|
||||
|
||||
[tmc2209 extruder]
|
||||
uart_pin: PD5
|
||||
uart_address: 2
|
||||
diag_pin: ^PA15
|
||||
driver_SGTHRS: 100
|
||||
run_current: 0.4
|
||||
sense_resistor: 0.22
|
||||
|
||||
[heater_bed]
|
||||
heater_pin: PB0
|
||||
sensor_type: EPCOS 100K B57560G104F
|
||||
sensor_pin: PA4
|
||||
control: pid
|
||||
pid_Kp: 120
|
||||
pid_Ki: 1.5
|
||||
pid_Kd: 600
|
||||
min_temp: 10
|
||||
max_temp: 110
|
||||
|
||||
# Hotend fan.
|
||||
# The stock firmware uses control ranges of PWM 0-50%, RPM 1000-8000.
|
||||
# Change fan_speed below to match your preference. Measured speeds:
|
||||
# fan_speed 0.5: 50% PWM = 4000RPM (Prusa stock default speed)
|
||||
# fan_speed 1.0: 100% PWM = 8000RPM (safe but loud)
|
||||
[heater_fan hotend_fan]
|
||||
pin: PE9
|
||||
tachometer_pin: PE14
|
||||
fan_speed: 0.5
|
||||
|
||||
# Part cooling fan.
|
||||
# The stock firmware uses control ranges of PWM 10-50%, RPM 500-5000.
|
||||
# To match stock firmware, set the Klipper fan speed to 50%. This speed
|
||||
# can be safely increased to 100% for better part cooling. Measured speeds:
|
||||
# 50% PWM = 2500RPM (Prusa stock default speed)
|
||||
# 100% PWM = 5000RPM (better cooling, still quiet)
|
||||
[fan]
|
||||
pin: PE11
|
||||
tachometer_pin: PE10
|
||||
|
||||
# The SuperPINDA has built-in temperature compensation and no thermistor output,
|
||||
# so no compensation table is needed here.
|
||||
[probe]
|
||||
pin: PA8
|
||||
x_offset: -29
|
||||
y_offset: -3
|
||||
#z_offset: 0 # set this to your Live Z Offset, but negated (invert the sign)
|
||||
speed: 6.0
|
||||
|
||||
[safe_z_home]
|
||||
home_xy_position: 147.4,21.1
|
||||
z_hop: 4
|
||||
|
||||
[bed_mesh]
|
||||
speed: 100
|
||||
horizontal_move_z: 5
|
||||
mesh_min: 10,10
|
||||
mesh_max: 141,167
|
||||
probe_count: 4,4
|
||||
|
||||
[filament_switch_sensor filament_sensor]
|
||||
switch_pin: ^PB4
|
||||
pause_on_runout: True
|
||||
|
||||
[mcu]
|
||||
serial: /dev/serial/by-id/usb-Klipper_stm32f407xx_2B0024001547393432343038-if00
|
||||
restart_method: command
|
||||
|
||||
[printer]
|
||||
kinematics: cartesian
|
||||
max_velocity: 180
|
||||
max_accel: 1250
|
||||
max_z_velocity: 12
|
||||
max_z_accel: 400
|
||||
|
||||
[display]
|
||||
lcd_type: st7789v
|
||||
spi_bus: spi2a
|
||||
rst_pin: PC8
|
||||
cs_pin: PC9
|
||||
rs_pin: PD11
|
||||
encoder_pins: ^PE13, ^PE15
|
||||
click_pin: ^!PE12
|
||||
Loading…
Reference in a new issue