konni/klipper_config
1
0
Fork 0
Code Pull requests Releases Activity

minor update

Browse source
This commit is contained in:
Konstantin Koslowski 2022-05-16 10:10:22 +02:00
parent 8ceb08e917
commit 08b6abb178
3 changed files with 14 additions and 19 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

4
input_shaper.cfg
View file

@ -4,9 +4,9 @@
# is mzv input shaper.
# shaper_type: mzv
shaper_type_x: mzv
shaper_freq_x: 55.4
shaper_freq_x: 53.6
shaper_type_y: mzv
shaper_freq_y: 43.6
shaper_freq_y: 43.2
# Damping ratios of vibrations of X and Y axes used by input shapers
# to improve vibration suppression. Default value is 0.1 which is a
# good all-round value for most printers. In most circumstances this

15
macros/print.cfg
View file

@ -18,8 +18,8 @@
gcode:
{% set x0=250 %}
{% set x1=200 %}
{% set y0=309 %}
{% set z0=1.5 %}
{% set y0=309.5 %}
{% set z0=1.0 %}
{% set z_hop = printer['gcode_macro _USER_VARIABLE'].z_hop|int %}
{% if "xyz" in printer.toolhead.homed_axes %}
G0 Z{z_hop} F1000 # move Z to travel height
@ -116,7 +116,6 @@ gcode:
[gcode_macro PRINT_START]
gcode:
{% set BED=params.BED|default(100)|int %}
{% set BED10=params.BED|default(100)|int - 10 %}
{% set EXTRUDER=params.EXTRUDER|default(250)|int %}
{% set BMC=params.BMC|default(0)|int %}
{% set SHEET=params.SHEET|default("default")|string %}
@ -128,8 +127,8 @@ gcode:
M117 CONFIGURING
M118 CONFIGURING
SET_GCODE_OFFSET Z=0.0 # reset z offset
M140 S{BED10} # start bed heating to bed-10
# M104 S{EXTRUDER} # start extruder heating
M140 S{BED} # start bed heating to bed
M104 S{EXTRUDER} # start extruder heating
G92 E0 # reset extruder
G21 # set units to millimeters
G90 # use absolute coordinates
@ -166,15 +165,11 @@ gcode:
M117 CALIBRATE_Z
M118 CALIBRATE_Z
G28 Z
BRUSHIE
CALIBRATE_Z
G92 E0 # reset extruder
NOTIFY_BED BED={BED10}
M190 S{BED10} # set and wait for bed-10 temperature
NOTIFY_EXTRUDER EXTRUDER={EXTRUDER}
M104 S{EXTRUDER} # start extruder heating
NOTIFY_BED BED={BED}
M190 S{BED} # set and wait for actual bed temperature
M109 S{EXTRUDER} # set and wait for extruder temperature

12
z_calibration.cfg
View file

@ -4,8 +4,8 @@
[gcode_macro _USER_VARIABLE]
description: Helper: Contains User defined printer variables
##### Homing and general movement #####
variable_z_endstop_x: 94.5 ; z Endstop x position inside right profile
variable_z_endstop_y: 307 ; z Endstop y position
variable_z_endstop_x: 94 ; z Endstop x position inside right profile
variable_z_endstop_y: 308 ; z Endstop y position
variable_z_hop: 12 ; z hop for moves e.g homing
variable_xy_home_current: 0.6 ; reduced homing current for x and y
variable_z_home_current: 0.5 ; reduced homing current for z
@ -35,12 +35,12 @@ gcode:
[z_calibration]
# The X and Y coordinates (in mm) for clicking the nozzle on the
# Z endstop.
probe_nozzle_x: 94.5
probe_nozzle_y: 307
probe_nozzle_x: 94
probe_nozzle_y: 308
# The X and Y coordinates (in mm) for clicking the probe's switch
# on the Z endstop.
probe_switch_x: 90
probe_switch_y: 287
probe_switch_y: 288
# The X and Y coordinates (in mm) for probing on the print surface
# (e.g. the center point) These coordinates will be adapted by the
# probe's X and Y offsets. The default is the relative_reference_index
@ -52,7 +52,7 @@ probe_bed_y: 150
# The trigger point offset of the used mag-probe switch.
# This needs to be fined out manually. More on this later
# in this section. smaller switch_offset -> more distance to the build plate
switch_offset: 0.50
switch_offset: 0.66
# The maximum allowed deviation of the calculated offset.
# If the offset exceeds this value, it will stop!
# The default is 1.0 mm.