ercf: remove

macros/print.cfg

@@ -44,7 +44,6 @@ gcode:
 description: Cancel the actual running print
 rename_existing: _CANCEL_PRINT_BASE
 gcode:
-  SET_FILAMENT_SENSOR SENSOR=encoder_sensor ENABLE=0
   CLEAR_PAUSE
   SDCARD_RESET_FILE
   TURN_OFF_HEATERS
@@ -52,16 +51,6 @@ gcode:
   _CANCEL_PRINT_BASE
 
 
-[gcode_macro LOAD_FILAMENT]
-gcode:
-  T0
-
-
-[gcode_macro UNLOAD_FILAMENT]
-gcode:
-  ERCF_EJECT
-
-
 [gcode_macro M600]
 description: Change filament
 gcode:
@@ -124,25 +113,21 @@ gcode:
     M118 already paused
   {% endif %}
 
-
 # - PRINT_START
 [gcode_macro PRINT_START]
 gcode:
   {% set BED=params.BED|default(100)|int %}
   {% set EXTRUDER=params.EXTRUDER|default(250)|int %}
-  {% set QGL=params.QGL|default(1)|int %}
+  {% set QGL=params.QGL|default(0)|int %}
   {% set BMC=params.BMC|default(0)|int %}
   {% set SHEET=params.SHEET|default("default")|string %}
   {% set PURGE=params.PURGE|default(0)|int %}
   {% set Z_ADJUST=params.Z_ADJUST|default(0.0)|float %}
-  {% set ERCF=params.ERCF|default(0)|int %}
+  {action_respond_info("starting print BED=%d, EXTRUDER=%d, SHEET=%s, BMC=%d, PURGE=%d, Z_AJUST=%f" % (BED, EXTRUDER, SHEET, BMC, PURGE, Z_ADJUST))}
-  {% set ERCF_EXTRUDER=params.ERCF_EXTRUDER|default(0)|int %}
-  {action_respond_info("starting print BED=%d, EXTRUDER=%d, SHEET=%s, BMC=%d, PURGE=%d, Z_AJUST=%f, ERCF=%d, ERCF_EXTRUDER=%d" % (BED, EXTRUDER, SHEET, BMC, PURGE, Z_ADJUST, ERCF, ERCF_EXTRUDER))}
   M117 CONFIGURING
   M118 CONFIGURING
   SET_GCODE_OFFSET Z=0.0  # reset z offset
   M140 S{BED}             # start bed heating to bed
-  # M104 S{EXTRUDER}        # start extruder heating
   G92 E0                  # reset extruder
   G21                     # set units to millimeters
   G90                     # use absolute coordinates
@@ -188,12 +173,6 @@ gcode:
   M109 S{EXTRUDER}        # set and wait for extruder temperature
 
   SET_GCODE_OFFSET Z_ADJUST={params.Z_ADJUST|default(0.0)|float} MOVE=1
-  {% if ERCF %}
-    M117 ercf changing to tool {ERCF_EXTRUDER}
-    M118 ercf changing to tool {ERCF_EXTRUDER}
-    ERCF_HOME
-    _ERCF_CHANGE_TOOL_SLICER TOOL={ERCF_EXTRUDER}
-  {% endif %}
   BRUSHIE
   {% if PURGE %}
     PURGE_NOZZLE
@@ -211,9 +190,6 @@ gcode:
   M400                          ; wait for buffer to clear
   G92 E0                        ; zero the extruder
   G1 E-10.0 F3600               ; retract filament
-  {% if UNLOAD_AT_END == 1 %}
-    ERCF_EJECT
-  {% endif %}
   TURN_OFF_HEATERS
   M107                          ; turn off fan
 
@@ -245,17 +221,9 @@ description: Resume the actual running print
 rename_existing: _RESUME_BASE
 gcode:
     {% if printer.pause_resume.is_paused|lower == 'true' %}
-      {% if printer["gcode_macro _ERCF_PAUSE"].is_paused|int != 0 %}
-          M118 You can't resume the print without unlocking the ERCF first.
-          M118 Run ERCF_UNLOCK and solve any issue before hitting Resume again
-      {% else %}
         RESTORE_GCODE_STATE NAME=PAUSE_state
         G90
-          {% if printer["gcode_macro _ERCF_VAR"].clog_detection|int == 1 %}
-              SET_FILAMENT_SENSOR SENSOR=encoder_sensor ENABLE=1
-          {% endif %}
         _RESUME_BASE
-      {% endif %}
     {% else %}
         M117 not paused
         M118 not paused

moonraker.conf

@@ -69,12 +69,12 @@ is_system_service: false
 path: ~/moonraker-timelapse
 origin: https://github.com/mainsail-crew/moonraker-timelapse.git
 
-[update_manager ercf]
+# [update_manager ercf]
-type: git_repo
+# type: git_repo
-primary_branch: main
+# primary_branch: main
-is_system_service: false
+# is_system_service: false
-path: ~/EnragedRabbitProject
+# path: ~/EnragedRabbitProject
-origin: https://github.com/EtteGit/EnragedRabbitProject.git
+# origin: https://github.com/EtteGit/EnragedRabbitProject.git
 
 [power voron-v2.4]
 # type: tplink_smartplug

printer.cfg

@@ -65,7 +65,6 @@ path: /home/pi/printer_data/gcodes
 [include neopixel.cfg]
 [include fans.cfg]
 [include resonance_test.cfg]
-[include ercf.cfg]
 
 
 #####################################################################