diff --git a/webcam-multi.txt b/webcam-xk.txt
similarity index 96%
rename from webcam-multi.txt
rename to webcam-xk.txt
index 5880078..e6af7ca 100644
--- a/webcam-multi.txt
+++ b/webcam-xk.txt
@@ -1,7 +1,7 @@
 # vim: ft=conf
 
 ### Additional options to supply to MJPG Streamer for the cameras
-camera_usb=1
+camera_usb=0
 camera_raspi=1
 camera_usb_options="-d /dev/v4l/by-id/usb-Vimicro_Corp._HBVCAM_FHD_CAMERA-video-index0 -r 1280x960 -f 10"
 camera_raspi_options="-d /dev/v4l/by-path/platform-bcm2835-isp-video-index0 -x 1024 -y 768 -roi 0.0,0.0,0.998,1"
diff --git a/webcam.txt b/webcam.txt
deleted file mode 100644
index b42becf..0000000
--- a/webcam.txt
+++ /dev/null
@@ -1,79 +0,0 @@
-# vim: ft=conf
-
-### Configure which camera to use
-#
-# Available options are:
-# - auto: tries first usb webcam, if that's not available tries raspi cam
-# - usb: only tries usb webcam
-# - raspi: only tries raspi cam
-#
-# Defaults to auto
-#
-camera="raspi"
-
-### Additional options to supply to MJPG Streamer for the USB camera
-#
-# See https://faq.octoprint.org/mjpg-streamer-config for available options
-#
-# Defaults to a resolution of 640x480 px and a framerate of 10 fps
-#
-#camera_usb_options="-r 640x480 -f 10"
-camera_usb_options="-r 800x600 -f 10"
-
-### Additional webcam devices known to cause problems with -f
-#
-# Apparently there a some devices out there that with the current
-# mjpg_streamer release do not support the -f parameter (for specifying
-# the capturing framerate) and will just refuse to output an image if it
-# is supplied.
-#
-# The webcam daemon will detect those devices by their USB Vendor and Product
-# ID and remove the -f parameter from the options provided to mjpg_streamer.
-#
-# By default, this is done for the following devices:
-#   Logitech C170 (046d:082b)
-#   GEMBIRD (1908:2310)
-#   Genius F100 (0458:708c)
-#   Cubeternet GL-UPC822 UVC WebCam (1e4e:0102)
-#
-# Using the following option it is possible to add additional devices. If
-# your webcam happens to show above symptoms, try determining your cam's
-# vendor and product id via lsusb, activating the line below by removing # and
-# adding it, e.g. for two broken cameras "aabb:ccdd" and "aabb:eeff"
-#
-#   additional_brokenfps_usb_devices=("aabb:ccdd" "aabb:eeff")
-#
-#
-#additional_brokenfps_usb_devices=()
-
-### Additional options to supply to MJPG Streamer for the RasPi Cam
-#
-# See https://faq.octoprint.org/mjpg-streamer-config for available options
-#
-# Defaults to 10fps
-#
-# camera_raspi_options="-x 800 -y 600 -fps 10 -roi 0.0,0.0,0.998,1 -rot 180"
-# camera_raspi_options="-x 800 -y 600 -fps 10 -roi 0.0,0.0,0.998,1"
-# camera_raspi_options="-x 800 -y 600 -roi 0.0,0.0,0.998,1"
-camera_raspi_options="-x 1024 -y 768 -roi 0.0,0.0,0.998,1"
-
-### Configuration of camera HTTP output
-#
-# Usually you should NOT need to change this at all! Only touch if you
-# know what you are doing and what the parameters mean.
-#
-# Below settings are used in the mjpg-streamer call like this:
-#
-#   -o "output_http.so -w $camera_http_webroot $camera_http_options"
-#
-# Current working directory is the mjpg-streamer base directory.
-#
-#camera_http_webroot="./www-fluidd"
-#camera_http_options="-n"
-
-### EXPERIMENTAL
-# Support for different streamer types.
-#
-# Available options:
-#   mjpeg [default] - stable MJPG-streamer
-#camera_streamer=mjpeg