From 50118c83d4781422bf59abf58753e82c26d70afc Mon Sep 17 00:00:00 2001 From: Konstantin Koslowski Date: Wed, 16 Nov 2022 22:24:42 +0100 Subject: [PATCH] printer: update calibration --- input_shaper.cfg | 2 +- printer.cfg | 18 +++++++++--------- z_calibration.cfg | 4 ++-- 3 files changed, 12 insertions(+), 12 deletions(-) diff --git a/input_shaper.cfg b/input_shaper.cfg index 6a5c041..5e00103 100644 --- a/input_shaper.cfg +++ b/input_shaper.cfg @@ -6,7 +6,7 @@ shaper_type_x: mzv shaper_freq_x: 53.6 shaper_type_y: mzv -shaper_freq_y: 43.2 +shaper_freq_y: 41.0 # Damping ratios of vibrations of X and Y axes used by input shapers # to improve vibration suppression. Default value is 0.1 which is a # good all-round value for most printers. In most circumstances this diff --git a/printer.cfg b/printer.cfg index 18aeb94..649dd2d 100644 --- a/printer.cfg +++ b/printer.cfg @@ -395,15 +395,15 @@ max_adjust: 10 #*# [bed_mesh default] #*# version = 1 #*# points = -#*# 0.005000, -0.007500, -0.010000, -0.020000, -0.020000, -0.023750, -0.007500, -0.010000, -0.010000 -#*# 0.016250, 0.000000, 0.007500, -0.013750, -0.025000, -0.017500, -0.027500, -0.012500, -0.036250 -#*# 0.015000, -0.003750, -0.003750, -0.006250, -0.007500, -0.015000, -0.022500, -0.013750, -0.017500 -#*# 0.012500, -0.003750, 0.002500, 0.000000, -0.001250, 0.000000, -0.026250, -0.032500, -0.042500 -#*# 0.016250, 0.005000, 0.007500, 0.008750, 0.000000, 0.010000, -0.001250, -0.007500, -0.022500 -#*# 0.028750, 0.020000, 0.015000, 0.010000, 0.002500, 0.006250, 0.005000, -0.002500, -0.021250 -#*# 0.021250, 0.011250, 0.003750, 0.005000, 0.002500, 0.003750, -0.000000, -0.003750, -0.021250 -#*# 0.040000, 0.032500, 0.025000, 0.020000, 0.015000, 0.013750, 0.011250, 0.008750, 0.001250 -#*# 0.065000, 0.046250, 0.057500, 0.027500, 0.033750, 0.032500, 0.033750, 0.035000, 0.015000 +#*# -0.055000, -0.057500, -0.058750, -0.061250, -0.060000, -0.052500, -0.042500, -0.031250, -0.032500 +#*# -0.033750, -0.043750, -0.036250, -0.045000, -0.047500, -0.038750, -0.038750, -0.021250, -0.038750 +#*# -0.040000, -0.047500, -0.040000, -0.031250, -0.025000, -0.018750, -0.020000, -0.005000, -0.003750 +#*# -0.037500, -0.043750, -0.023750, -0.006250, -0.010000, 0.008750, -0.008750, -0.008750, -0.006250 +#*# -0.035000, -0.036250, -0.023750, 0.020000, 0.000000, 0.046250, 0.021250, 0.031250, 0.032500 +#*# -0.027500, -0.020000, -0.018750, 0.003750, -0.008750, 0.020000, 0.021250, 0.031250, 0.026250 +#*# -0.046250, -0.036250, -0.031250, -0.021250, -0.007500, 0.011250, 0.020000, 0.033750, 0.036250 +#*# -0.031250, -0.022500, -0.018750, -0.008750, 0.006250, 0.018750, 0.027500, 0.042500, 0.046250 +#*# -0.018750, -0.012500, 0.032500, 0.006250, 0.021250, 0.035000, 0.052500, 0.063750, 0.068750 #*# tension = 0.2 #*# min_x = 40.0 #*# algo = bicubic diff --git a/z_calibration.cfg b/z_calibration.cfg index 5eb8218..39abef9 100644 --- a/z_calibration.cfg +++ b/z_calibration.cfg @@ -40,7 +40,7 @@ probe_nozzle_y: 307 # The X and Y coordinates (in mm) for clicking the probe's switch # on the Z endstop. probe_switch_x: 90 -probe_switch_y: 288 +probe_switch_y: 283 # The X and Y coordinates (in mm) for probing on the print surface # (e.g. the center point) These coordinates will be adapted by the # probe's X and Y offsets. The default is the relative_reference_index @@ -52,7 +52,7 @@ probe_bed_y: 150 # The trigger point offset of the used mag-probe switch. # This needs to be fined out manually. More on this later # in this section. smaller switch_offset -> more distance to the build plate -switch_offset: 0.50 +switch_offset: 0.59 # The maximum allowed deviation of the calculated offset. # If the offset exceeds this value, it will stop! # The default is 1.0 mm.