From 8ceb08e917381eb06bb0dca7ff30e9cde99ac1d0 Mon Sep 17 00:00:00 2001
From: Konstantin Koslowski <konstantin.koslowski@posteo.de>
Date: Thu, 28 Apr 2022 10:52:01 +0200
Subject: [PATCH] printer: update some variables

---
 printer.cfg | 35 +++++++++++++++++------------------
 1 file changed, 17 insertions(+), 18 deletions(-)

diff --git a/printer.cfg b/printer.cfg
index c75235e..2854a76 100644
--- a/printer.cfg
+++ b/printer.cfg
@@ -39,7 +39,7 @@ max_velocity: 600
 ## regular
 max_accel: 4000
 max_accel_to_decel: 2000
-# resonance testing
+## resonance testing
 # max_accel: 10000
 # max_accel_to_decel: 5000
 ##
@@ -105,7 +105,7 @@ microsteps: 32
 full_steps_per_rotation: 400  # 200: 1.8 deg stepper, 400: 0.9 deg stepper
 endstop_pin: PG9
 position_min: 0
-position_endstop: 307
+position_endstop: 308
 position_max: 310
 homing_speed: 30              # Max 100
 homing_retract_dist: 5
@@ -133,7 +133,7 @@ gear_ratio: 80:16
 microsteps: 32
 endstop_pin: PG10
 ## actual_position = measured_position_endstop - position_endstop
-position_endstop: 0.5
+position_endstop: 0
 position_max: 290
 position_min: -1
 homing_speed: 8.0             # speed: mm/sec, feedrate: mm/min
@@ -220,11 +220,10 @@ full_steps_per_rotation: 200  # 1.8 deg stepper: 200, 0.9 deg stepper
 nozzle_diameter: 0.400
 filament_diameter: 1.75
 heater_pin: PA2
-## Validate the following thermistor type to make sure it is correct
-sensor_type: ATC Semitec 104GT-2
+sensor_type: ATC Semitec 104NT-4-R025H42G
 sensor_pin: PF4
 min_temp: 10
-max_temp: 270
+max_temp: 280 # specified to 300
 max_power: 1.0
 min_extrude_temp: 170
 #control = pid
@@ -232,7 +231,7 @@ min_extrude_temp: 170
 #pid_ki = 1.304
 #pid_kd = 131.721
 ## Try to keep pressure_advance below 1.0
-pressure_advance: 0.05
+# pressure_advance: 0.05
 ## Default is 0.040, leave stock
 pressure_advance_smooth_time: 0.040
 # Maximum length (in mm of raw filament) that a retraction or
@@ -308,7 +307,7 @@ timeout: 1800
 ## replaced with homing_override in klicky-probe.cfg
 # [safe_z_home]
 # ## XY Location of the Z Endstop Switch
-# home_xy_position: 94.5, 305
+# home_xy_position: 94, 306
 # speed: 100
 # z_hop: 10
 # z_hop_speed: 25
@@ -381,20 +380,20 @@ max_adjust: 10
 #*#
 #*# [extruder]
 #*# control = pid
-#*# pid_kp = 27.862
-#*# pid_ki = 1.548
-#*# pid_kd = 125.379
+#*# pid_kp = 19.058
+#*# pid_ki = 1.495
+#*# pid_kd = 60.749
 #*#
 #*# [bed_mesh default]
 #*# version = 1
 #*# points =
-#*# 	  -0.005000, -0.018750, -0.012500, -0.015000, -0.015000, 0.002500, 0.002500
-#*# 	  0.008750, -0.006250, 0.000000, -0.012500, -0.008750, 0.015000, 0.007500
-#*# 	  -0.005000, -0.020000, -0.006250, -0.011250, -0.007500, 0.007500, 0.005000
-#*# 	  0.007500, -0.006250, 0.010000, 0.000000, 0.005000, 0.018750, 0.011250
-#*# 	  0.006250, -0.006250, 0.006250, 0.011250, 0.015000, 0.025000, 0.018750
-#*# 	  0.003750, -0.005000, 0.001250, -0.001250, 0.003750, 0.017500, 0.008750
-#*# 	  0.026250, 0.018750, 0.016250, 0.020000, 0.025000, 0.032500, 0.025000
+#*# 	  0.053750, 0.030000, 0.036250, 0.028750, 0.031250, 0.055000, 0.053750
+#*# 	  0.031250, 0.011250, 0.022500, 0.008750, 0.012500, 0.037500, 0.026250
+#*# 	  0.008750, -0.012500, -0.002500, 0.008750, -0.008750, 0.001250, -0.005000
+#*# 	  -0.000000, -0.011250, 0.008750, 0.000000, 0.002500, 0.006250, -0.007500
+#*# 	  0.012500, 0.001250, 0.005000, -0.006250, -0.003750, 0.006250, -0.006250
+#*# 	  0.002500, -0.005000, 0.001250, -0.002500, -0.000000, 0.008750, -0.000000
+#*# 	  0.035000, 0.026250, 0.026250, 0.031250, 0.026250, 0.040000, 0.025000
 #*# tension = 0.2
 #*# min_x = 40.0
 #*# algo = bicubic