printer: update
This commit is contained in:
parent
d9f92ea58f
commit
c1e5a770d5
5 changed files with 63 additions and 100 deletions
|
|
@ -1,15 +0,0 @@
|
|||
[input_shaper]
|
||||
# A type of the input shaper to use for both X and Y axes. Supported
|
||||
# shapers are zv, mzv, zvd, ei, 2hump_ei, and 3hump_ei. The default
|
||||
# is mzv input shaper.
|
||||
# shaper_type: mzv
|
||||
shaper_type_x: mzv
|
||||
shaper_freq_x: 53.6
|
||||
shaper_type_y: mzv
|
||||
shaper_freq_y: 41.0
|
||||
# Damping ratios of vibrations of X and Y axes used by input shapers
|
||||
# to improve vibration suppression. Default value is 0.1 which is a
|
||||
# good all-round value for most printers. In most circumstances this
|
||||
# parameter requires no tuning and should not be changed.
|
||||
damping_ratio_x: 0.1
|
||||
damping_ratio_y: 0.1
|
||||
|
|
@ -2,8 +2,6 @@
|
|||
# Macros used for printing
|
||||
# - BRUSHIE
|
||||
# - CANCEL_PRINT
|
||||
# - EXCLUDE_OBJECT_END
|
||||
# - EXCLUDE_OBJECT_START
|
||||
# - LOAD_FILAMENT
|
||||
# - UNLOAD_FILAMENT
|
||||
# - M600
|
||||
|
|
@ -54,16 +52,6 @@ gcode:
|
|||
_CANCEL_PRINT_BASE
|
||||
|
||||
|
||||
[gcode_macro EXCLUDE_OBJECT_END]
|
||||
description: fix unknown command
|
||||
gcode:
|
||||
|
||||
|
||||
[gcode_macro EXCLUDE_OBJECT_START]
|
||||
description: fix unknown command
|
||||
gcode:
|
||||
|
||||
|
||||
[gcode_macro LOAD_FILAMENT]
|
||||
gcode:
|
||||
T0
|
||||
|
|
@ -167,7 +155,7 @@ gcode:
|
|||
G28
|
||||
BRUSHIE
|
||||
# QGL
|
||||
{% if QGL %}
|
||||
{% if QGL or not printer['quad_gantry_level'].applied %}
|
||||
M117 QGL
|
||||
M118 QGL
|
||||
QUAD_GANTRY_LEVEL
|
||||
|
|
@ -189,6 +177,7 @@ gcode:
|
|||
|
||||
G92 E0 # reset extruder
|
||||
G90 # use absolute coordinates
|
||||
M104 S{EXTRUDER} # start extruder heating
|
||||
NOTIFY_BED BED={BED}
|
||||
M190 S{BED} # set and wait for actual bed temperature
|
||||
# final home z
|
||||
|
|
@ -268,8 +257,8 @@ gcode:
|
|||
_RESUME_BASE
|
||||
{% endif %}
|
||||
{% else %}
|
||||
M117 not paused
|
||||
M118 not paused
|
||||
M117 not paused
|
||||
M118 not paused
|
||||
{% endif %}
|
||||
|
||||
|
||||
|
|
|
|||
|
|
@ -22,6 +22,7 @@ trusted_clients:
|
|||
::1/128
|
||||
|
||||
[file_manager]
|
||||
enable_object_processing: True
|
||||
|
||||
[data_store]
|
||||
temperature_store_size: 600
|
||||
|
|
@ -48,7 +49,7 @@ path: ~/fluidd
|
|||
# repo: mainsail-crew/mainsail
|
||||
# path: ~/mainsail
|
||||
|
||||
# [update_manager klipper-mcu-update]
|
||||
# [update_manager klipper]
|
||||
# type: git_repo
|
||||
# origin: https://github.com/Klipper3d/klipper.git
|
||||
# path: ~/klipper
|
||||
|
|
@ -79,7 +80,7 @@ origin: https://github.com/EtteGit/EnragedRabbitProject.git
|
|||
# type: tplink_smartplug
|
||||
# address: 192.168.11.91
|
||||
type: tasmota
|
||||
address: 192.168.11.92
|
||||
address: pcu-eg-office-voronberry.nom
|
||||
# password: mypassword
|
||||
|
||||
[timelapse]
|
||||
|
|
@ -100,5 +101,6 @@ frame_path: /tmp/timelapse/
|
|||
type: git_repo
|
||||
path: ~/crowsnest
|
||||
origin: https://github.com/mainsail-crew/crowsnest.git
|
||||
primary_branch: legacy/v3
|
||||
managed_services: crowsnest
|
||||
install_script: tools/install.sh
|
||||
|
|
|
|||
90
printer.cfg
90
printer.cfg
|
|
@ -54,6 +54,8 @@ path: /home/pi/printer_data/gcodes
|
|||
|
||||
[display_status]
|
||||
|
||||
[exclude_object]
|
||||
|
||||
#####################################################################
|
||||
# includes
|
||||
#####################################################################
|
||||
|
|
@ -62,8 +64,7 @@ path: /home/pi/printer_data/gcodes
|
|||
[include macros/_init.cfg]
|
||||
[include neopixel.cfg]
|
||||
[include fans.cfg]
|
||||
[include input_shaper.cfg]
|
||||
# [include resonance_test.cfg]
|
||||
[include resonance_test.cfg]
|
||||
[include ercf.cfg]
|
||||
|
||||
|
||||
|
|
@ -283,31 +284,33 @@ sample_retract_dist: 3
|
|||
samples_tolerance: 0.01
|
||||
samples_tolerance_retries: 5
|
||||
|
||||
activate_gcode:
|
||||
{% set PROBE_TEMP = 200 %}
|
||||
{% set MAX_TEMP = PROBE_TEMP + 5 %}
|
||||
{% set ACTUAL_TEMP = printer.extruder.temperature %}
|
||||
{% set TARGET_TEMP = printer.extruder.target %}
|
||||
|
||||
{% if TARGET_TEMP > PROBE_TEMP %}
|
||||
{ action_respond_info('Extruder temperature target of %.1fC is too high, lowering to %.1fC' % (TARGET_TEMP, PROBE_TEMP)) }
|
||||
M109 S{ PROBE_TEMP }
|
||||
{% else %}
|
||||
# Temperature target is already low enough, but nozzle may still be too hot.
|
||||
{% if ACTUAL_TEMP > MAX_TEMP %}
|
||||
{ action_respond_info('Extruder temperature %.1fC is still too high, waiting until below %.1fC' % (ACTUAL_TEMP, MAX_TEMP)) }
|
||||
TEMPERATURE_WAIT SENSOR=extruder MAXIMUM={ MAX_TEMP }
|
||||
{% endif %}
|
||||
{% endif %}
|
||||
# activate_gcode:
|
||||
# # impatient
|
||||
# # {% set PROBE_TEMP = 200 %}
|
||||
# {% set PROBE_TEMP = 250 %}
|
||||
# {% set MAX_TEMP = PROBE_TEMP + 5 %}
|
||||
# {% set ACTUAL_TEMP = printer.extruder.temperature %}
|
||||
# {% set TARGET_TEMP = printer.extruder.target %}
|
||||
#
|
||||
# {% if TARGET_TEMP > PROBE_TEMP %}
|
||||
# { action_respond_info('Extruder temperature target of %.1fC is too high, lowering to %.1fC' % (TARGET_TEMP, PROBE_TEMP)) }
|
||||
# M109 S{ PROBE_TEMP }
|
||||
# {% else %}
|
||||
# # Temperature target is already low enough, but nozzle may still be too hot.
|
||||
# {% if ACTUAL_TEMP > MAX_TEMP %}
|
||||
# { action_respond_info('Extruder temperature %.1fC is still too high, waiting until below %.1fC' % (ACTUAL_TEMP, MAX_TEMP)) }
|
||||
# TEMPERATURE_WAIT SENSOR=extruder MAXIMUM={ MAX_TEMP }
|
||||
# {% endif %}
|
||||
# {% endif %}
|
||||
|
||||
|
||||
[bed_mesh]
|
||||
speed: 500
|
||||
horizontal_move_z: 10
|
||||
# 40, 40 --> 40 + probe.x_offset, 40 + probe.y_offset
|
||||
mesh_min: 40, 70
|
||||
mesh_min: 40, 40
|
||||
# 260, 260 --> 260 + probe.x_offset, 260 + probe.y_offset
|
||||
mesh_max: 260,290
|
||||
mesh_max: 260, 260
|
||||
# fade_start: 1
|
||||
# fade_end: 10
|
||||
# fade_target: 0
|
||||
|
|
@ -321,7 +324,8 @@ algorithm: bicubic
|
|||
# probe_count: 7,7
|
||||
# relative_reference_index: 24
|
||||
probe_count: 9,9
|
||||
relative_reference_index: 40
|
||||
# relative_reference_index: 40
|
||||
zero_reference_position: 150.00, 150.00
|
||||
|
||||
[quad_gantry_level]
|
||||
speed: 500
|
||||
|
|
@ -349,28 +353,34 @@ max_adjust: 10
|
|||
#*#
|
||||
#*# [extruder]
|
||||
#*#
|
||||
#*# [probe]
|
||||
#*# z_offset = -0.850
|
||||
#*#
|
||||
#*# [input_shaper]
|
||||
#*# shaper_type_x = 3hump_ei
|
||||
#*# shaper_freq_x = 89.2
|
||||
#*# shaper_type_y = mzv
|
||||
#*# shaper_freq_y = 30.6
|
||||
#*#
|
||||
#*# [bed_mesh default]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# -0.035000, -0.030000, -0.013750, -0.032500, -0.018750, -0.023750, -0.022500, -0.020000, -0.027500
|
||||
#*# -0.030000, -0.028750, -0.022500, -0.028750, -0.027500, -0.028750, -0.022500, -0.017500, -0.026250
|
||||
#*# -0.026250, -0.031250, -0.025000, -0.027500, -0.031250, -0.027500, -0.028750, -0.038750, -0.050000
|
||||
#*# -0.036250, -0.025000, -0.017500, -0.017500, -0.018750, -0.005000, 0.005000, 0.002500, -0.002500
|
||||
#*# -0.016250, -0.017500, -0.021250, -0.013750, 0.000000, -0.010000, -0.003750, -0.015000, -0.016250
|
||||
#*# -0.036250, -0.043750, -0.040000, -0.047500, -0.032500, -0.031250, -0.038750, -0.031250, -0.032500
|
||||
#*# -0.058750, -0.031250, -0.030000, -0.026250, -0.027500, -0.027500, -0.020000, -0.036250, -0.052500
|
||||
#*# -0.050000, -0.053750, -0.038750, -0.046250, -0.035000, -0.025000, -0.023750, -0.035000, -0.047500
|
||||
#*# -0.063750, -0.045000, -0.041250, -0.038750, -0.032500, -0.031250, -0.028750, -0.037500, -0.042500
|
||||
#*# -0.057500, -0.073750, -0.055000, -0.015000, -0.026250, -0.012500, -0.021250, -0.048750, -0.062500
|
||||
#*# -0.028750, -0.053750, -0.048750, -0.041250, -0.046250, -0.025000, -0.028750, -0.028750, -0.040000
|
||||
#*# -0.077500, -0.053750, -0.091250, -0.076250, -0.051250, -0.035000, -0.050000, -0.087500, -0.063750
|
||||
#*# -0.048750, -0.042500, -0.071250, -0.011250, -0.073750, -0.041250, -0.075000, -0.090000, -0.118750
|
||||
#*# -0.081250, -0.052500, -0.061250, -0.046250, 0.000000, -0.037500, -0.062500, -0.100000, -0.120000
|
||||
#*# -0.095000, -0.116250, -0.037500, -0.020000, -0.075000, -0.068750, -0.048750, -0.111250, -0.121250
|
||||
#*# -0.118750, -0.078750, -0.083750, -0.116250, -0.087500, -0.133750, -0.117500, -0.122500, -0.162500
|
||||
#*# -0.126250, -0.110000, -0.087500, -0.107500, -0.083750, -0.128750, -0.107500, -0.138750, -0.155000
|
||||
#*# -0.055000, -0.088750, -0.083750, -0.130000, -0.121250, -0.111250, -0.106250, -0.128750, -0.141250
|
||||
#*# x_count = 9
|
||||
#*# y_count = 9
|
||||
#*# mesh_x_pps = 2
|
||||
#*# mesh_y_pps = 2
|
||||
#*# algo = bicubic
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 40.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 9
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 70.0
|
||||
#*# x_count = 9
|
||||
#*# max_y = 290.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 260.0
|
||||
#*#
|
||||
#*# [probe]
|
||||
#*# z_offset = -0.913
|
||||
#*# min_y = 40.0
|
||||
#*# max_y = 260.0
|
||||
|
|
|
|||
|
|
@ -1,39 +1,16 @@
|
|||
[mcu nano]
|
||||
serial: /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0
|
||||
|
||||
# [mcu pico]
|
||||
# serial: /dev/serial/by-id/usb-Klipper_rp2040_E660583883511936-if00
|
||||
|
||||
[board_pins arduino]
|
||||
mcu: nano
|
||||
aliases:
|
||||
ar0=PD0, ar1=PD1, ar2=PD2, ar3=PD3, ar4=PD4,
|
||||
ar5=PD5, ar6=PD6, ar7=PD7, ar8=PB0, ar9=PB1,
|
||||
ar10=PB2, ar11=PB3, ar12=PB4, ar13=PB5, ar14=PC0,
|
||||
ar15=PC1, ar16=PC2, ar17=PC3, ar18=PC4, ar19=PC5,
|
||||
analog0=PC0, analog1=PC1, analog2=PC2, analog3=PC3, analog4=PC4,
|
||||
analog5=PC5, analog6=PE2, analog7=PE3
|
||||
|
||||
## arduino nano
|
||||
## EBB36
|
||||
[adxl345]
|
||||
cs_pin: nano:ar10
|
||||
spi_software_sclk_pin: nano:ar13
|
||||
spi_software_mosi_pin: nano:ar11
|
||||
spi_software_miso_pin: nano:ar12
|
||||
cs_pin: EBBCan:PB12
|
||||
spi_software_sclk_pin: EBBCan:PB10
|
||||
spi_software_mosi_pin: EBBCan:PB11
|
||||
spi_software_miso_pin: EBBCan:PB2
|
||||
axes_map: x,y,z
|
||||
|
||||
# ## rpi pico
|
||||
# [adxl345]
|
||||
# cs_pin: pico:gpio1
|
||||
# spi_bus: spi0a
|
||||
# axes_map: x,y,z
|
||||
|
||||
[resonance_tester]
|
||||
accel_chip: adxl345
|
||||
probe_points:
|
||||
150,150,20 # an example
|
||||
|
||||
|
||||
[gcode_macro TR]
|
||||
gcode:
|
||||
{% if not "xyz" in printer.toolhead.homed_axes %}
|
||||
|
|
|
|||
Loading…
Reference in a new issue