konni/klipper_config
1
0
Fork 0
Code Pull requests Releases Activity

wip

Browse source
This commit is contained in:
Konstantin Koslowski 2024-02-07 22:43:43 +01:00
parent 1e0d04f2ab
commit c298263d94
6 changed files with 175 additions and 58 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

19
KlipperScreen.conf
View file

@ -1,14 +1,25 @@
[printer v2.4]
# Define distances and speeds for the extrude panel. CSV list 2 to 4 integers the second
# value is default
extrude_distances: 5, 10, 15, 25
extrude_speeds: 2, 5, 10, 25
[preheat PLA] [preheat PLA]
bed = 50 bed = 50
extruder = 200 extruder = 200
[preheat ABS]
bed = 105
extruder = 250
[preheat PETG] [preheat PETG]
bed = 80 bed = 80
extruder = 240 extruder = 240
[preheat ASA]
bed = 100
extruder = 230
[preheat ABS]
bed = 110
extruder = 255
#~# --- Do not edit below this line. This section is auto generated --- #~# #~# --- Do not edit below this line. This section is auto generated --- #~#
#~# #~#
#~# [main] #~# [main]

62
crowsnest.conf
View file

@ -1,10 +1,60 @@
#### crowsnest.conf
#### This is a typical default config.
#### Also used as default in mainsail / MainsailOS
#### See:
#### https://github.com/mainsail-crew/crowsnest/blob/master/README.md
#### for details to configure to your needs.
#####################################################################
#### #####
#### Information about ports and according URL's #####
#### #####
#####################################################################
#### #####
#### Port 8080 equals /webcam/?action=[stream/snapshot] #####
#### Port 8081 equals /webcam2/?action=[stream/snapshot] #####
#### Port 8082 equals /webcam3/?action=[stream/snapshot] #####
#### Port 8083 equals /webcam4/?action=[stream/snapshot] #####
#### #####
#### Note: These ports are default for most Mainsail #####
#### installations. To use any other port would involve #####
#### changing the proxy configuration or using directly #####
#### http://<ip>:<port>/?action=[stream/snapshot] #####
#### #####
#####################################################################
#### RTSP Stream URL: ( if enabled and supported ) #####
#### rtsp://<ip>:<rtsp_port>/stream.h264 #####
#####################################################################
[crowsnest] [crowsnest]
log_path: ~/printer_data/logs/crowsnest.log log_path: ~/printer_data/logs/crowsnest.log
log_level: quiet log_level: verbose # Valid Options are quiet/verbose/debug
delete_log: false # Deletes log on every restart, if set to true
no_proxy: false
## LEGACY
[cam 1] [cam 1]
mode: mjpg mode: ustreamer # ustreamer - Provides mjpg and snapshots. (All devices)
port: 8080 # camera-streamer - Provides webrtc, mjpg and snapshots. (rpi + Raspi OS based only)
device: /dev/video0 enable_rtsp: false # If camera-streamer is used, this enables also usage of an rtsp server
resolution: 1280x960 rtsp_port: 8554 # Set different ports for each device!
max_fps: 10 port: 8080 # HTTP/MJPG Stream/Snapshot Port
device: /dev/video0 # See Log for available ...
resolution: 640x480 # widthxheight format
max_fps: 15 # If Hardware Supports this it will be forced, otherwise ignored/coerced.
#custom_flags: # You can run the Stream Services with custom flags.
#v4l2ctl: # Add v4l2-ctl parameters to setup your camera, see Log what your cam is capable of.
# ## LIBCAMERA
# [cam 1]
# mode: camera-streamer # ustreamer - Provides mjpg and snapshots. (All devices)
# # enable_rtsp: false # If camera-streamer is used, this enables also usage of an rtsp server
# # rtsp_port: 8554 # Set different ports for each device!
# # port: 8080 # HTTP/MJPG Stream/Snapshot Port
# device: /dev/v4l/by-path/platform-3f801000.csi-video-index0 # See Log for available ...
# # resolution: 1920x1080 # widthxheight format
# # max_fps: 15 # If Hardware Supports this it will be forced, otherwise ignored/coerced.
# #custom_flags: # You can run the Stream Services with custom flags.
# #v4l2ctl: # Add v4l2-ctl parameters to setup your camera, see Log what your cam is capable of.

30
macros/debug.cfg
View file

@ -7,6 +7,36 @@
##################################################################### #####################################################################
[gcode_macro xk]
gcode:
M117 xk
M118 xk
# M117 {quad_gantry_level.applied}
# M118 {quad_gantry_level.applied}
{% if printer['quad_gantry_level'] is not none %}
M117 not none
M118 not none
{% if printer['quad_gantry_level'].applied %}
M117 not none yes
M118 not none yes
{% endif %}
{% else %}
M117 not not none
M118 not not none
{% endif %}
{% if printer['quad_gantry_level'] is defined %}
M117 defined
M118 defined
{% if printer['quad_gantry_level'].applied %}
M117 defined yes
M118 defined yes
{% endif %}
{% else %}
M117 not defined
M118 not defined
{% endif %}
## Use: ## Use:
## - DUMP_PARAMETERS ## - DUMP_PARAMETERS
## - DUMP_PARAMETERS S='gcode_macro _USER_VARIABLE' ## - DUMP_PARAMETERS S='gcode_macro _USER_VARIABLE'

17
macros/print.cfg
View file

@ -39,7 +39,7 @@ gcode:
{% endif %} {% endif %}
# # - CANCEL_PRINT # CANCEL_PRINT
[gcode_macro CANCEL_PRINT] [gcode_macro CANCEL_PRINT]
description: Cancel the actual running print description: Cancel the actual running print
rename_existing: _CANCEL_PRINT_BASE rename_existing: _CANCEL_PRINT_BASE
@ -50,6 +50,18 @@ gcode:
PARK PARK
_CANCEL_PRINT_BASE _CANCEL_PRINT_BASE
# LOAD_FILAMENT
[gcode_macro LOAD_FILAMENT]
description: extrude 100mm of filament
gcode:
G0 E100 F600 # speed 10*60
# UNLOAD_FILAMENT
[gcode_macro UNLOAD_FILAMENT]
description: retract 100mm of filament
gcode:
G0 E-100 F600 # speed 10*60
[gcode_macro M600] [gcode_macro M600]
description: Change filament description: Change filament
@ -124,6 +136,7 @@ gcode:
{% set PURGE=params.PURGE|default(0)|int %} {% set PURGE=params.PURGE|default(0)|int %}
{% set Z_ADJUST=params.Z_ADJUST|default(0.0)|float %} {% set Z_ADJUST=params.Z_ADJUST|default(0.0)|float %}
{action_respond_info("starting print BED=%d, EXTRUDER=%d, SHEET=%s, BMC=%d, PURGE=%d, Z_AJUST=%f" % (BED, EXTRUDER, SHEET, BMC, PURGE, Z_ADJUST))} {action_respond_info("starting print BED=%d, EXTRUDER=%d, SHEET=%s, BMC=%d, PURGE=%d, Z_AJUST=%f" % (BED, EXTRUDER, SHEET, BMC, PURGE, Z_ADJUST))}
{% set EXTRUDER_MIN=120 %}
M117 CONFIGURING M117 CONFIGURING
M118 CONFIGURING M118 CONFIGURING
SET_GCODE_OFFSET Z=0.0 # reset z offset SET_GCODE_OFFSET Z=0.0 # reset z offset
@ -162,7 +175,7 @@ gcode:
G92 E0 # reset extruder G92 E0 # reset extruder
G90 # use absolute coordinates G90 # use absolute coordinates
M104 S{EXTRUDER} # start extruder heating M104 S{EXTRUDER_MIN} # start extruder heating
NOTIFY_BED BED={BED} NOTIFY_BED BED={BED}
M190 S{BED} # set and wait for actual bed temperature M190 S{BED} # set and wait for actual bed temperature
# final home z # final home z

18
moonraker.conf
View file

@ -62,12 +62,12 @@ env: ~/.KlipperScreen-env/bin/python
requirements: scripts/KlipperScreen-requirements.txt requirements: scripts/KlipperScreen-requirements.txt
install_script: scripts/KlipperScreen-install.sh install_script: scripts/KlipperScreen-install.sh
[update_manager timelapse] # [update_manager timelapse]
type: git_repo # type: git_repo
primary_branch: main # primary_branch: main
is_system_service: false # is_system_service: false
path: ~/moonraker-timelapse # path: ~/moonraker-timelapse
origin: https://github.com/mainsail-crew/moonraker-timelapse.git # origin: https://github.com/mainsail-crew/moonraker-timelapse.git
# [update_manager ercf] # [update_manager ercf]
# type: git_repo # type: git_repo
@ -83,16 +83,16 @@ type: tasmota
address: pcu-eg-office-voronberry.nom address: pcu-eg-office-voronberry.nom
# password: mypassword # password: mypassword
[timelapse] # [timelapse]
## Following basic configuration is default to most images and don't need ## Following basic configuration is default to most images and don't need
## to be changed in most scenarios. Only uncomment and change it if your ## to be changed in most scenarios. Only uncomment and change it if your
## Image differ from standard installations. In most common scenarios ## Image differ from standard installations. In most common scenarios
## a User only need [timelapse] in there configuration. ## a User only need [timelapse] in there configuration.
## ##
## Directory where the generated video will be saved ## Directory where the generated video will be saved
output_path: ~/timelapse/ # output_path: ~/timelapse/
## Directory where the temporary frames are saved ## Directory where the temporary frames are saved
frame_path: /tmp/timelapse/ # frame_path: /tmp/timelapse/
## Directory where ffmpeg is installed ## Directory where ffmpeg is installed
#ffmpeg_binary_path: /usr/bin/ffmpeg #ffmpeg_binary_path: /usr/bin/ffmpeg

87
printer.cfg
View file

@ -56,6 +56,19 @@ path: /home/pi/printer_data/gcodes
[exclude_object] [exclude_object]
# enable M118 and RESPOND
[respond]
# default_type: echo
# default_type: echo
# Sets the default prefix of the "M118" and "RESPOND" output to one
# of the following:
# echo: "echo: " (This is the default)
# command: "// "
# error: "!! "
default_prefix: >>
# Directly sets the default prefix. If present, this value will
# override the "default_type".
#
##################################################################### #####################################################################
# includes # includes
##################################################################### #####################################################################
@ -283,33 +296,33 @@ sample_retract_dist: 3
samples_tolerance: 0.01 samples_tolerance: 0.01
samples_tolerance_retries: 5 samples_tolerance_retries: 5
# activate_gcode: activate_gcode:
# # impatient # impatient
# # {% set PROBE_TEMP = 200 %} {% set PROBE_TEMP = 120 %}
# {% set PROBE_TEMP = 250 %} # {% set PROBE_TEMP = 250 %}
# {% set MAX_TEMP = PROBE_TEMP + 5 %} {% set MAX_TEMP = PROBE_TEMP + 5 %}
# {% set ACTUAL_TEMP = printer.extruder.temperature %} {% set ACTUAL_TEMP = printer.extruder.temperature %}
# {% set TARGET_TEMP = printer.extruder.target %} {% set TARGET_TEMP = printer.extruder.target %}
#
# {% if TARGET_TEMP > PROBE_TEMP %} {% if TARGET_TEMP > PROBE_TEMP %}
# { action_respond_info('Extruder temperature target of %.1fC is too high, lowering to %.1fC' % (TARGET_TEMP, PROBE_TEMP)) } { action_respond_info('Extruder temperature target of %.1fC is too high, lowering to %.1fC' % (TARGET_TEMP, PROBE_TEMP)) }
# M109 S{ PROBE_TEMP } M109 S{ PROBE_TEMP }
# {% else %} {% else %}
# # Temperature target is already low enough, but nozzle may still be too hot. # Temperature target is already low enough, but nozzle may still be too hot.
# {% if ACTUAL_TEMP > MAX_TEMP %} {% if ACTUAL_TEMP > MAX_TEMP %}
# { action_respond_info('Extruder temperature %.1fC is still too high, waiting until below %.1fC' % (ACTUAL_TEMP, MAX_TEMP)) } { action_respond_info('Extruder temperature %.1fC is still too high, waiting until below %.1fC' % (ACTUAL_TEMP, MAX_TEMP)) }
# TEMPERATURE_WAIT SENSOR=extruder MAXIMUM={ MAX_TEMP } TEMPERATURE_WAIT SENSOR=extruder MAXIMUM={ MAX_TEMP }
# {% endif %} {% endif %}
# {% endif %} {% endif %}
[bed_mesh] [bed_mesh]
speed: 500 speed: 500
horizontal_move_z: 10 horizontal_move_z: 10
# 40, 40 --> 40 + probe.x_offset, 40 + probe.y_offset # x, y --> x + probe.x_offset, y + probe.y_offset
mesh_min: 40, 40 mesh_min: 35, 35
# 260, 260 --> 260 + probe.x_offset, 260 + probe.y_offset # x, y --> x + probe.x_offset, y + probe.y_offset
mesh_max: 260, 260 mesh_max: 265, 265
# fade_start: 1 # fade_start: 1
# fade_end: 10 # fade_end: 10
# fade_target: 0 # fade_target: 0
@ -324,7 +337,7 @@ algorithm: bicubic
# relative_reference_index: 24 # relative_reference_index: 24
probe_count: 9,9 probe_count: 9,9
# relative_reference_index: 40 # relative_reference_index: 40
zero_reference_position: 150.00, 150.00 zero_reference_position: 145.00, 145.00
[quad_gantry_level] [quad_gantry_level]
speed: 500 speed: 500
@ -353,7 +366,7 @@ max_adjust: 10
#*# [extruder] #*# [extruder]
#*# #*#
#*# [probe] #*# [probe]
#*# z_offset = -0.850 #*# z_offset = -0.880
#*# #*#
#*# [input_shaper] #*# [input_shaper]
#*# shaper_type_x = 3hump_ei #*# shaper_type_x = 3hump_ei
@ -364,22 +377,22 @@ max_adjust: 10
#*# [bed_mesh default] #*# [bed_mesh default]
#*# version = 1 #*# version = 1
#*# points = #*# points =
#*# -0.057500, -0.073750, -0.055000, -0.015000, -0.026250, -0.012500, -0.021250, -0.048750, -0.062500 #*# -0.000973, 0.016527, 0.007777, 0.001527, 0.016527, -0.005973, 0.014027, 0.015277, 0.007777
#*# -0.028750, -0.053750, -0.048750, -0.041250, -0.046250, -0.025000, -0.028750, -0.028750, -0.040000 #*# -0.003473, 0.012777, 0.009027, -0.005973, 0.011527, 0.000277, 0.021527, 0.002777, 0.012777
#*# -0.077500, -0.053750, -0.091250, -0.076250, -0.051250, -0.035000, -0.050000, -0.087500, -0.063750 #*# 0.004027, 0.007777, 0.012777, 0.020277, 0.024027, 0.024027, 0.020277, 0.017777, 0.014027
#*# -0.048750, -0.042500, -0.071250, -0.011250, -0.073750, -0.041250, -0.075000, -0.090000, -0.118750 #*# -0.005973, -0.008473, -0.002223, -0.003473, 0.019027, -0.003473, -0.003473, -0.002223, -0.003473
#*# -0.081250, -0.052500, -0.061250, -0.046250, 0.000000, -0.037500, -0.062500, -0.100000, -0.120000 #*# -0.000973, -0.007223, -0.004723, 0.011527, -0.004723, -0.000973, 0.022777, 0.009027, -0.005973
#*# -0.095000, -0.116250, -0.037500, -0.020000, -0.075000, -0.068750, -0.048750, -0.111250, -0.121250 #*# 0.001527, 0.015277, 0.036527, 0.015277, 0.014027, 0.012777, 0.021527, 0.016527, 0.019027
#*# -0.118750, -0.078750, -0.083750, -0.116250, -0.087500, -0.133750, -0.117500, -0.122500, -0.162500 #*# -0.010973, 0.012777, -0.005973, -0.000973, 0.000277, -0.007223, 0.000277, -0.002223, -0.012223
#*# -0.126250, -0.110000, -0.087500, -0.107500, -0.083750, -0.128750, -0.107500, -0.138750, -0.155000 #*# -0.007223, 0.005277, 0.006527, 0.015277, 0.011527, 0.024027, 0.011527, -0.012223, 0.001527
#*# -0.055000, -0.088750, -0.083750, -0.130000, -0.121250, -0.111250, -0.106250, -0.128750, -0.141250 #*# -0.003473, -0.003473, 0.009027, -0.008473, 0.009027, 0.007777, 0.009027, -0.007223, -0.009723
#*# x_count = 9 #*# x_count = 9
#*# y_count = 9 #*# y_count = 9
#*# mesh_x_pps = 2 #*# mesh_x_pps = 2
#*# mesh_y_pps = 2 #*# mesh_y_pps = 2
#*# algo = bicubic #*# algo = bicubic
#*# tension = 0.2 #*# tension = 0.2
#*# min_x = 40.0 #*# min_x = 35.0
#*# max_x = 260.0 #*# max_x = 265.0
#*# min_y = 40.0 #*# min_y = 35.0
#*# max_y = 260.0 #*# max_y = 265.0