From e20b2823d13fa20a325d33d091ae0ee8978ff7c2 Mon Sep 17 00:00:00 2001
From: Konstantin Koslowski <konstantin.koslowski@posteo.de>
Date: Tue, 15 Feb 2022 18:25:42 +0100
Subject: [PATCH] v2.4: minor changes

---
 ercf/vars.cfg     |  2 +-
 printer.cfg       | 17 +++++++++--------
 z_calibration.cfg |  4 ++--
 3 files changed, 12 insertions(+), 11 deletions(-)

diff --git a/ercf/vars.cfg b/ercf/vars.cfg
index 5d5d493..eb170ad 100644
--- a/ercf/vars.cfg
+++ b/ercf/vars.cfg
@@ -4,7 +4,7 @@ ercf_calib_1 = 0.992410468168
 ercf_calib_10 = 1.0
 ercf_calib_11 = 1.0
 ercf_calib_2 = 1.00044979689
-ercf_calib_3 = 1.00044979689
+ercf_calib_3 = 0.999550111824
 ercf_calib_4 = 1.00044979689
 ercf_calib_5 = 0.999550111824
 ercf_calib_6 = 1.0
diff --git a/printer.cfg b/printer.cfg
index 16b9a29..c75235e 100644
--- a/printer.cfg
+++ b/printer.cfg
@@ -135,7 +135,7 @@ endstop_pin: PG10
 ## actual_position = measured_position_endstop - position_endstop
 position_endstop: 0.5
 position_max: 290
-position_min: -5
+position_min: -1
 homing_speed: 8.0             # speed: mm/sec, feedrate: mm/min
 homing_retract_speed: 10
 second_homing_speed: 2
@@ -324,6 +324,7 @@ pin: ^PG11
 x_offset: 0
 y_offset: 30
 z_offset: 12
+speed: 5.0
 lift_speed: 20
 samples: 3
 samples_result: median
@@ -387,13 +388,13 @@ max_adjust: 10
 #*# [bed_mesh default]
 #*# version = 1
 #*# points =
-#*# 	  0.003750, -0.005000, 0.001250, 0.000000, 0.000000, 0.025000, 0.020000
-#*# 	  0.007500, -0.005000, 0.003750, -0.008750, -0.003750, 0.018750, 0.007500
-#*# 	  -0.007500, -0.027500, -0.005000, -0.013750, -0.010000, 0.000000, -0.003750
-#*# 	  0.005000, -0.001250, 0.006250, 0.000000, 0.000000, 0.010000, 0.001250
-#*# 	  0.003750, -0.000000, 0.003750, -0.002500, -0.000000, 0.013750, 0.001250
-#*# 	  0.008750, 0.005000, 0.008750, 0.006250, 0.007500, 0.018750, 0.007500
-#*# 	  0.035000, 0.027500, 0.032500, 0.037500, 0.038750, 0.055000, 0.042500
+#*# 	  -0.005000, -0.018750, -0.012500, -0.015000, -0.015000, 0.002500, 0.002500
+#*# 	  0.008750, -0.006250, 0.000000, -0.012500, -0.008750, 0.015000, 0.007500
+#*# 	  -0.005000, -0.020000, -0.006250, -0.011250, -0.007500, 0.007500, 0.005000
+#*# 	  0.007500, -0.006250, 0.010000, 0.000000, 0.005000, 0.018750, 0.011250
+#*# 	  0.006250, -0.006250, 0.006250, 0.011250, 0.015000, 0.025000, 0.018750
+#*# 	  0.003750, -0.005000, 0.001250, -0.001250, 0.003750, 0.017500, 0.008750
+#*# 	  0.026250, 0.018750, 0.016250, 0.020000, 0.025000, 0.032500, 0.025000
 #*# tension = 0.2
 #*# min_x = 40.0
 #*# algo = bicubic
diff --git a/z_calibration.cfg b/z_calibration.cfg
index 25584c3..1c9c04c 100644
--- a/z_calibration.cfg
+++ b/z_calibration.cfg
@@ -7,7 +7,7 @@ description: Helper: Contains User defined printer variables
 variable_z_endstop_x: 94.5            ; z Endstop x position inside right profile
 variable_z_endstop_y: 307             ; z Endstop y position
 variable_z_hop: 12                    ; z hop for moves e.g homing
-variable_xy_home_current: 0.5         ; reduced homing current for x and y
+variable_xy_home_current: 0.6         ; reduced homing current for x and y
 variable_z_home_current: 0.5          ; reduced homing current for z
 variable_home_accel: 1000             ; reduced ACCEL for homing
 ##### Mag Probe #####
@@ -52,7 +52,7 @@ probe_bed_y: 150
 #   The trigger point offset of the used mag-probe switch.
 #   This needs to be fined out manually. More on this later
 #   in this section. smaller switch_offset -> more distance to  the build plate
-switch_offset: 0.55
+switch_offset: 0.50
 #   The maximum allowed deviation of the calculated offset.
 #   If the offset exceeds this value, it will stop!
 #   The default is 1.0 mm.