From e5f8e7216488df0ad85e482d25eac81be319bb3c Mon Sep 17 00:00:00 2001
From: Konstantin Koslowski <konstantin.koslowski@posteo.de>
Date: Fri, 5 Aug 2022 12:48:49 +0200
Subject: [PATCH] printer: update for cw2

---
 printer.cfg | 24 +++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)

diff --git a/printer.cfg b/printer.cfg
index e71fb78..18aeb94 100644
--- a/printer.cfg
+++ b/printer.cfg
@@ -210,7 +210,7 @@ stealthchop_threshold: 0
 # E0 on MOTOR6
 [extruder]
 step_pin: PE2
-dir_pin: PE3
+dir_pin: !PE3
 enable_pin: !PD4
 ## Update value below when you perform extruder calibration
 ## If you ask for 100mm of filament, but in reality it is 98mm:
@@ -218,11 +218,12 @@ enable_pin: !PD4
 ## 22.6789511 is a good starting point
 rotation_distance: 22.6789511   #Bondtech 5mm Drive Gears
 ## Update Gear Ratio depending on your Extruder Type
-## Use 50:17 for Afterburner/Clockwork (BMG Gear Ratio)
-## Use 80:20 for M4, M3.1
-gear_ratio: 50:17             # BMG Gear Ratio
+## - 50:17 for Afterburner/Clockwork
+## - 50:10 for Stealthburner/Clockwork2
+## - 80:20 for M4, M3.1
+gear_ratio: 50:10             # SB BMG
 microsteps: 32
-full_steps_per_rotation: 200  # 1.8 deg stepper: 200, 0.9 deg stepper
+full_steps_per_rotation: 200  # 1.8 deg stepper: 200, 0.9 deg stepper: 400
 nozzle_diameter: 0.400
 filament_diameter: 1.75
 heater_pin: PA2
@@ -295,12 +296,13 @@ max_temp: 100
 # gcode_id: C
 
 
-[temperature_sensor chamber]
-sensor_type: chamber
-sensor_pin: PF5
-min_temp: 0
-max_temp: 100
-gcode_id: C
+## replaced, there is no thermistor on the stealthburner pcb
+# [temperature_sensor chamber]
+# sensor_type: chamber
+# sensor_pin: PF5
+# min_temp: 0
+# max_temp: 100
+# gcode_id: C
 
 [temperature_sensor RPI]
 sensor_type: temperature_host