From ee4f55f1eb1b66338a48024215825338be01c0e9 Mon Sep 17 00:00:00 2001 From: Konstantin Koslowski Date: Tue, 31 May 2022 21:43:33 +0200 Subject: [PATCH] printer: change Y position, 9x9 mesh, calibrate --- printer.cfg | 36 +++++++++++++++++++----------------- z_calibration.cfg | 8 ++++---- 2 files changed, 23 insertions(+), 21 deletions(-) diff --git a/printer.cfg b/printer.cfg index 2854a76..414598a 100644 --- a/printer.cfg +++ b/printer.cfg @@ -105,8 +105,8 @@ microsteps: 32 full_steps_per_rotation: 400 # 200: 1.8 deg stepper, 400: 0.9 deg stepper endstop_pin: PG9 position_min: 0 -position_endstop: 308 -position_max: 310 +position_endstop: 306 +position_max: 308 homing_speed: 30 # Max 100 homing_retract_dist: 5 homing_positive_dir: true @@ -349,10 +349,10 @@ algorithm: bicubic # relative_reference_index: 4 # probe_count: 5,5 # relative_reference_index: 12 -probe_count: 7,7 -relative_reference_index: 24 -# probe_count: 9,9 -# relative_reference_index: 40 +# probe_count: 7,7 +# relative_reference_index: 24 +probe_count: 9,9 +relative_reference_index: 40 [quad_gantry_level] speed: 150 @@ -387,20 +387,22 @@ max_adjust: 10 #*# [bed_mesh default] #*# version = 1 #*# points = -#*# 0.053750, 0.030000, 0.036250, 0.028750, 0.031250, 0.055000, 0.053750 -#*# 0.031250, 0.011250, 0.022500, 0.008750, 0.012500, 0.037500, 0.026250 -#*# 0.008750, -0.012500, -0.002500, 0.008750, -0.008750, 0.001250, -0.005000 -#*# -0.000000, -0.011250, 0.008750, 0.000000, 0.002500, 0.006250, -0.007500 -#*# 0.012500, 0.001250, 0.005000, -0.006250, -0.003750, 0.006250, -0.006250 -#*# 0.002500, -0.005000, 0.001250, -0.002500, -0.000000, 0.008750, -0.000000 -#*# 0.035000, 0.026250, 0.026250, 0.031250, 0.026250, 0.040000, 0.025000 +#*# 0.006250, 0.002500, -0.003750, -0.011250, -0.007500, -0.006250, 0.002500, 0.005000, 0.007500 +#*# 0.005000, -0.003750, 0.005000, -0.010000, -0.008750, 0.000000, -0.001250, 0.015000, 0.007500 +#*# 0.003750, -0.011250, -0.006250, -0.006250, -0.003750, -0.005000, -0.007500, 0.006250, 0.006250 +#*# -0.011250, -0.025000, -0.005000, -0.006250, -0.006250, 0.003750, -0.003750, -0.002500, -0.003750 +#*# -0.006250, -0.008750, -0.003750, 0.002500, 0.000000, 0.008750, 0.007500, 0.005000, -0.000000 +#*# -0.005000, -0.003750, -0.002500, -0.005000, -0.005000, 0.007500, 0.008750, 0.012500, 0.006250 +#*# -0.021250, -0.026250, -0.027500, -0.017500, -0.013750, -0.007500, -0.007500, -0.006250, -0.010000 +#*# -0.005000, -0.007500, -0.007500, -0.007500, -0.006250, -0.003750, -0.001250, -0.001250, -0.002500 +#*# 0.005000, -0.002500, 0.001250, -0.006250, -0.000000, 0.003750, 0.006250, 0.015000, 0.003750 #*# tension = 0.2 #*# min_x = 40.0 #*# algo = bicubic -#*# y_count = 7 +#*# y_count = 9 #*# mesh_y_pps = 2 #*# min_y = 70.0 -#*# x_count = 7 -#*# max_y = 289.96 +#*# x_count = 9 +#*# max_y = 290.0 #*# mesh_x_pps = 2 -#*# max_x = 259.96 +#*# max_x = 260.0 diff --git a/z_calibration.cfg b/z_calibration.cfg index 4440a69..2008b0c 100644 --- a/z_calibration.cfg +++ b/z_calibration.cfg @@ -5,7 +5,7 @@ description: Helper: Contains User defined printer variables ##### Homing and general movement ##### variable_z_endstop_x: 94 ; z Endstop x position inside right profile -variable_z_endstop_y: 308 ; z Endstop y position +variable_z_endstop_y: 306 ; z Endstop y position variable_z_hop: 12 ; z hop for moves e.g homing variable_xy_home_current: 0.6 ; reduced homing current for x and y variable_z_home_current: 0.5 ; reduced homing current for z @@ -15,7 +15,7 @@ variable_probe_dock_x: 53 ; x toolhead position before docking probe variable_probe_dock_y: 250 ; y toolhead position before docking probe variable_probe_dock_z: 12 ; z toolhead position before docking probe (only for bed dock) variable_probe_undock_x: 110 ; x toolhead position after docking probe -variable_probe_undock_y: 309 ; y toolhead position after docking probe +variable_probe_undock_y: 307 ; y toolhead position after docking probe variable_probe_undock_z: 12 ; z toolhead position after docking probe (only for bed dock) variable_probe_z_min: 12 ; z minimum height to avoid crash variable_probe_travel_speed: 100 ; dock moves travel speed @@ -36,7 +36,7 @@ gcode: # The X and Y coordinates (in mm) for clicking the nozzle on the # Z endstop. probe_nozzle_x: 94 -probe_nozzle_y: 308 +probe_nozzle_y: 306 # The X and Y coordinates (in mm) for clicking the probe's switch # on the Z endstop. probe_switch_x: 90 @@ -52,7 +52,7 @@ probe_bed_y: 150 # The trigger point offset of the used mag-probe switch. # This needs to be fined out manually. More on this later # in this section. smaller switch_offset -> more distance to the build plate -switch_offset: 0.66 +switch_offset: 0.60 # The maximum allowed deviation of the calculated offset. # If the offset exceeds this value, it will stop! # The default is 1.0 mm.