konni/klipper_config
1
0
Fork 0
Code Pull requests Releases Activity

v2.4: tweak bmc, z-calibration, add mcu-temp, M900

Browse source
This commit is contained in:
Konstantin Koslowski 2021-11-03 21:14:49 +01:00
parent 6e7400e356
commit eed32bf9b7
3 changed files with 61 additions and 40 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

19
macros/print.cfg
View file

@ -3,6 +3,7 @@
# - BRUSHIE
# - CANCEL_PRINT
# - M600
# - M900
# - PARK
# - PAUSE
# - PRINT_START
@ -15,15 +16,15 @@
# BRUSHIE
[gcode_macro BRUSHIE]
gcode:
{% set x0=40 %}
{% set x1=110 %}
{% set y0=305 %}
{% set x0=200 %}
{% set x1=250 %}
{% set y0=306 %}
{% set z0=1 %}
{% set z_hop = printer['gcode_macro _USER_VARIABLE'].z_hop|int %}
{% if "xyz" in printer.toolhead.homed_axes %}
M117 > brushie brushie brushie
G0 Z{z_hop} F1000 # move Z to travel height
G0 X{x0} Y{y0} F5000 # move to x0/y0
G0 X{x0} Y{y0} F6000 # move to x0/y0
G0 Z{z0} # lower
G0 X{x1} # back
G0 X{x0} # forth
@ -52,6 +53,11 @@ gcode:
M117 > change filament
RESTORE_GCODE_STATE NAME=M600_state
[gcode_macro M900]
description: Set pressure advance
gcode:
SET_PRESSURE_ADVANCE ADVANCE={params.K|default(0)}
# PARK
[gcode_macro PARK]
@ -111,14 +117,14 @@ gcode:
{% set BED=params.BED|default(100)|int %}
{% set EXTRUDER=params.EXTRUDER|default(250)|int %}
{% set CHAMBER=params.CHAMBER|default(0)|int %}
{% set QGL=params.QGL|default(1)|int %}
{% set BMC=params.BMC|default(0)|int %}
{% set QGL=params.QGL|default(0)|int %}
{% set PURGE=params.PURGE|default(1)|int %}
{% set SOAK=params.SOAK|default(0)|int * 1000 * 60 %}
{% set Z_ADJUST=params.Z_ADJUST|default(0.0)|float %}
# TODO: ERCF
{% set ERCF=params.ERCF|default(0) %}
{action_respond_info("starting print BED=%d, EXTRUDER=%d, BMC=%d, PURGE=%d, SOAK=%d, Z_AJUST=%f" % (BED, EXTRUDER, BMC, PURGE, SOAK, Z_ADJUST))}
{action_respond_info("starting print BED=%d, EXTRUDER=%d, CHAMBER=%d, QGL=%d, BMC=%d, PURGE=%d, SOAK=%d, Z_AJUST=%f" % (BED, EXTRUDER, CHAMBER, QGL, BMC, PURGE, SOAK, Z_ADJUST))}
M117 > configuring
SET_LED LED=caselight RED=0.00 GREEN=0.00 BLUE=0.50
G4 P2000
@ -167,6 +173,7 @@ gcode:
{% endif %}
M117 > starting
SET_PRESSURE_ADVANCE ADVANCE=0.05
SET_GCODE_OFFSET Z_ADJUST={params.Z_ADJUST|default(0.0)|float} MOVE=1
SET_LED LED=caselight RED=0.50 GREEN=0.50 BLUE=0.50
G4 P2000

62
printer.cfg
View file

@ -117,7 +117,7 @@ full_steps_per_rotation: 400 # 200: 1.8 deg stepper, 400: 0.9 deg stepper
endstop_pin: PG9
position_min: 0
position_endstop: 305
position_max: 305
position_max: 306
homing_speed: 30 # Max 100
homing_retract_dist: 5
homing_positive_dir: true
@ -149,8 +149,8 @@ position_endstop: 0.5
position_max: 290
position_min: -5
homing_speed: 13.0 # speed: mm/sec, feedrate: mm/min
second_homing_speed: 4
homing_retract_dist: 13
second_homing_speed: 3
homing_retract_dist: 3
[tmc2209 stepper_z]
uart_pin: PC6
@ -291,15 +291,15 @@ max_temp: 120
## Microswitch probe
pin: ^PG11
x_offset: 0
y_offset: 25.0
z_offset: 10
speed: 6
lift_speed: 11
y_offset: 30
z_offset: 12
speed: 3
lift_speed: 25
samples: 5
samples_result: median
sample_retract_dist: 3.0
sample_retract_dist: 2.0
samples_tolerance: 0.01
samples_tolerance_retries: 3
samples_tolerance_retries: 5
#####################################################################
@ -326,6 +326,13 @@ temperature1: 25
resistance1: 10000
beta: 3950
[temperature_sensor MCU]
sensor_type: temperature_mcu
sensor_mcu: mcu
min_temp: 0
max_temp: 100
# gcode_id: C
[temperature_sensor chamber]
sensor_type: chamber
@ -334,7 +341,7 @@ min_temp: 0
max_temp: 100
gcode_id: C
[temperature_sensor rpi]
[temperature_sensor RPI]
sensor_type: temperature_host
min_temp: 0
max_temp: 100
@ -345,35 +352,42 @@ timeout: 1800
## replaced with homing_override in klicky-probe.cfg
# [safe_z_home]
# ## XY Location of the Z Endstop Switch
# home_xy_position: 205, 305
# home_xy_position: 94.5, 305
# speed: 100
# z_hop: 10
# z_hop_speed: 25
[bed_mesh]
speed: 500
horizontal_move_z: 15
mesh_min: 40,60
mesh_max: 260,280
fade_start: 0.6
fade_end: 10
probe_count: 5,5
horizontal_move_z: 12
# 40, 40 --> 40 + probe.x_offset, 40 + probe.y_offset
mesh_min: 40, 70
# 260, 260 --> 260 + probe.x_offset, 260 + probe.y_offset
mesh_max: 260,290
# fade_start: 1
# fade_end: 10
# fade_target: 0
algorithm: bicubic
# relative_reference_index = ((x points * y points) - 1) / 2
relative_reference_index: 12
# 3x3: 4, 5x5: 12, 7x7: 24, 9x9: 40
# probe_count: 3,3
# relative_reference_index: 4
# probe_count: 5,5
# relative_reference_index: 9
probe_count: 9,9
relative_reference_index: 40
[quad_gantry_level]
## Use QUAD_GANTRY_LEVEL to level a gantry.
gantry_corners:
-60,-10
360,370
points:
50,40
50,225
250,225
250,40
40,40
40,260
260,260
260,40
speed: 150
horizontal_move_z: 15
horizontal_move_z: 12
retries: 5
retry_tolerance: 0.0075
max_adjust: 10

20
z_calibration.cfg
View file

@ -4,17 +4,17 @@
[gcode_macro _USER_VARIABLE]
description: Helper: Contains User defined printer variables
##### Homing and general movement #####
variable_z_endstop_x: 205 ; z Endstop x position inside right profile
variable_z_endstop_x: 94.5 ; z Endstop x position inside right profile
variable_z_endstop_y: 305 ; z Endstop y position
variable_z_hop: 12 ; z hop for moves e.g homing
variable_xy_home_current: 0.5 ; reduced homing current for x and y
variable_z_home_current: 0.4 ; reduced homing current for z
variable_home_accel: 1000 ; reduced ACCEL for homing
##### Mag Probe #####
variable_probe_dock_x: 145 ; x toolhead position before docking probe
variable_probe_dock_y: 285 ; y toolhead position before docking probe
variable_probe_dock_x: 52 ; x toolhead position before docking probe
variable_probe_dock_y: 250 ; y toolhead position before docking probe
variable_probe_dock_z: 12 ; z toolhead position before docking probe (only for bed dock)
variable_probe_undock_x: 200 ; x toolhead position after docking probe
variable_probe_undock_x: 120 ; x toolhead position after docking probe
variable_probe_undock_y: 305 ; y toolhead position after docking probe
variable_probe_undock_z: 12 ; z toolhead position after docking probe (only for bed dock)
variable_probe_z_min: 12 ; z minimum height to avoid crash
@ -35,11 +35,11 @@ gcode:
[z_calibration]
# The X and Y coordinates (in mm) for clicking the nozzle on the
# Z endstop.
probe_nozzle_x: 205
probe_nozzle_x: 94.5
probe_nozzle_y: 305
# The X and Y coordinates (in mm) for clicking the probe's switch
# on the Z endstop.
probe_switch_x: 201
probe_switch_x: 90
probe_switch_y: 284
# The X and Y coordinates (in mm) for probing on the print surface
# (e.g. the center point) These coordinates will be adapted by the
@ -52,7 +52,7 @@ probe_bed_y: 150
# The trigger point offset of the used mag-probe switch.
# This needs to be fined out manually. More on this later
# in this section. smaller switch_offset -> more distance to the build plate
switch_offset: 0.75
switch_offset: 0.72
# The maximum allowed deviation of the calculated offset.
# If the offset exceeds this value, it will stop!
# The default is 1.0 mm.
@ -73,10 +73,10 @@ max_deviation: 1.0
# position. The default is two times the z_offset from the probe's
# configuration.
#position_min: default from "stepper_z:position_min" section.
# The moving speed in X and Y. The default is 50 mm/s.
# Clearance
# Extra clearance when moving
clearance: 12
# speed: 200
# The moving speed in X and Y. The default is 50 mm/s.
speed: 100
# Speed (in mm/s) of the Z axis when lifting the probe between
# samples and clearance moves. The default is from the probe's
# configuration.