diff --git a/macros/print.cfg b/macros/print.cfg
index 3ac267d..0474253 100644
--- a/macros/print.cfg
+++ b/macros/print.cfg
@@ -116,6 +116,7 @@ gcode:
 [gcode_macro PRINT_START]
 gcode:
   {% set BED=params.BED|default(100)|int %}
+  {% set BED10=params.BED|default(100)|int - 10 %}
   {% set EXTRUDER=params.EXTRUDER|default(250)|int %}
   {% set BMC=params.BMC|default(0)|int %}
   {% set SHEET=params.SHEET|default("default")|string %}
@@ -127,8 +128,8 @@ gcode:
   M117 CONFIGURING
   M118 CONFIGURING
   SET_GCODE_OFFSET Z=0.0  # reset z offset
-  M140 S{BED}             # start bed heating
-  M104 S{EXTRUDER}        # start extruder heating
+  M140 S{BED10}           # start bed heating to bed-10
+  # M104 S{EXTRUDER}        # start extruder heating
   G92 E0                  # reset extruder
   G21                     # set units to millimeters
   G90                     # use absolute coordinates
@@ -166,14 +167,17 @@ gcode:
   M117 CALIBRATE_Z
   M118 CALIBRATE_Z
   BRUSHIE
-  G28 Z
   CALIBRATE_Z
 
-  G92 E0                 # reset extruder
-  NOTIFY_BED BED={BED}
-  M190 S{BED}            # set and wait for bed temperature
+  G92 E0                  # reset extruder
+  NOTIFY_BED BED={BED10}
+  M190 S{BED10}           # set and wait for bed-10 temperature
+
   NOTIFY_EXTRUDER EXTRUDER={EXTRUDER}
-  M109 S{EXTRUDER}       # set and wait for extruder temperature
+  M104 S{EXTRUDER}        # start extruder heating
+  NOTIFY_BED BED={BED}
+  M190 S{BED}             # set and wait for actual bed temperature
+  M109 S{EXTRUDER}        # set and wait for extruder temperature
 
   SET_GCODE_OFFSET Z_ADJUST={params.Z_ADJUST|default(0.0)|float} MOVE=1
   {% if ERCF %}
@@ -222,7 +226,7 @@ gcode:
   G0 Y{y1}                    # move to y1
   G0 X{x0} E10                # draw fine line
   G0 X{x0-10}                 # move a little further
-  G0 E-3                      # retract filament
+  G0 E-5                      # retract filament
   G0 Z{z_hop} F300            # move Z to travel height