v2.4: update menu, disable some stock items, add more input-lists

display_menu.cfg

@@ -6,6 +6,16 @@
 [menu __main __octoprint]
 type: disabled
 
+## Control
+[menu __main __control __home]
+type: disabled
+
+[menu __main __control __homez]
+type: disabled
+
+[menu __main __control __homexy]
+type: disabled
+
 ##  PreHeat
 [menu __main __temp __preheat_pla]
 type: disabled
@@ -26,6 +36,17 @@ type: disabled
 [menu __main __filament __unloads]
 type: disabled
 
+## Control
+[menu __main __control __home]
+type: disabled
+
+[menu __main __control __homez]
+type: disabled
+
+[menu __main __control __homexy]
+type: disabled
+
+
 # Bed Probe
 [menu __main __setup __calib __bedprobe]
 type: disabled
@@ -39,62 +60,82 @@ type: disabled
 
 
 # Added Items to the Stock menu
-[menu __main __filament __front_center]
+## Control
-type: command
+[menu __main __control __home]
-name: Front Center
+type: input
-gcode:
-  CENTER Y=25
-
-[menu __main __filament __preheat_pla]
-type: command
-name: Preheat PLA
-gcode:
-  PREHEAT EXTRUDER_TEMP=190
-
-[menu __main __filament __preheat_abs]
-type: command
-name: Preheat ABS
-gcode:
-  PREHEAT EXTRUDER_TEMP=215
-
-[menu __main __filament __load]
-type: command
-name: Load Filament
-gcode:
-  FILAMENT_LOAD
-
-[menu __main __filament __unload]
-type: command
-name: Unload Filament
-gcode:
-  FILAMENT_UNLOAD
-
-[menu __main __filament __purge]
-type: command
-name: Purge Filament (10mm)
-gcode:
-  FILAMENT_PURGE
-
-[menu __main __setup __calib __home]
-type: command
 enable: {not printer.idle_timeout.state == "Printing"}
-name: Home
+name: Home: {['noop', 'ALL', 'XY', 'Z'][menu.input|int]}
+input: 0
+input_min: 0
+input_max: 3
+input_step: 1
 gcode:
-  G28
+  {%- if menu.event == 'long_click' -%}
+    {[' ', 'G28', 'G28 XY', 'G28 Z'][menu.input|int]}
+  {%- endif -%}
 
-[menu __main __setup __calib __center]
+[menu __main __control __move]
-type: command
+type: input
 enable: {not printer.idle_timeout.state == "Printing"}
-name: Center
+name: Move: {['FRONT CENTER', 'CENTER', 'REAR CENTER'][menu.input|int]}
+input: 0
+input_min: 0
+input_max: 2
+input_step: 1
 gcode:
-  CENTER
+  {%- if menu.event == 'long_click' -%}
+    CENTER {['Y=15', '', 'Y=290'][menu.input|int]}
+  {%- endif -%}
 
+
+## Filament
+[menu __main __filament __preheat]
+type: input
+enable: {not printer.idle_timeout.state == "Printing"}
+name: Preheat: {['Off', 'ABS', 'PLA', 'PET'][menu.input|int]}
+input: 0
+input_min: 0
+input_max: 3
+input_step: 1
+gcode:
+  {%- if menu.event == 'long_click' -%}
+    M104 S{[0, 215, 190, 200][menu.input|int]}
+  {%- endif -%}
+
+
+[menu __main __filament __filament_load]
+type: input
+enable: {not printer.idle_timeout.state == "Printing"}
+name: Filament: {['noop', 'Load', 'Unload', 'Purge (10mm)'][menu.input|int]}
+input: 0
+input_min: 0
+input_max: 3
+input_step: 1
+gcode:
+  {%- if menu.event == 'long_click' -%}
+    {% if printer.extruder.can_extrude|lower == 'true' %}
+      M83
+      G1 {['E0', 'E50 F3000', 'E-75 F3000', 'E10 F300'][menu.input|int]}
+      G1 {['E0', 'E35 F300', 'E0', 'E0'][menu.input|int]}
+      M82
+    {% else %}
+      {action_respond_info("extruder not hot enough")}
+    {%- endif -%}
+  {%- endif -%}
+
+
+## Calibration
 [menu __main __setup __calib __bedprobe]
 type: command
 enable: {not printer.idle_timeout.state == "Printing"}
 name: Bed probe
 gcode:
+  {%- if printer.toolhead.position.y|float < 270 -%}
     PROBE
+  {%- else -%}
+    {action_respond_info("Won't probe inunsafe position")}
+  {%- endif -%}
+
 
 ## Probe & Endstop Z-Offset calibration
 [menu __main __setup __calib __Z_offset]
@@ -105,20 +146,16 @@ name: Z offset
 [menu __main __setup __calib __Z_offset __start]
 type: input
 enable: {not printer.idle_timeout.state == "Printing"}
-name: Do {['None','Home','Probe','Endstop'][menu.input|int]}
+name: Calibrate: {['noop','Probe','Endstop'][menu.input|int]}
 input: 0
 input_min: 0
-input_max: 3
+input_max: 2
 input_step: 1
 gcode:
   {%- if menu.event == 'long_click' -%}
     {menu.back()}
   {%- endif -%}
   {%- if menu.input|int == 1 -%}
-    {action_respond_info("Start Homing")}
-    G28
-    CENTER
-  {%- elif menu.input|int == 2 -%}
     {% if "xyz" in printer.toolhead.homed_axes %}
       {action_respond_info("Start Probe calibration")}
       CENTER
@@ -126,7 +163,7 @@ gcode:
     {%- else -%}
       {action_respond_info("Printer not homed")}
     {%- endif -%}
-  {%- elif menu.input|int == 3 -%}
+  {%- elif menu.input|int == 2 -%}
     {% if "xyz" in printer.toolhead.homed_axes %}
       {action_respond_info(" Start Z-Endstop calibration")}
       CENTER
@@ -157,14 +194,14 @@ gcode:
 
 [menu __main __setup __calib __Z_offset __test_z]
 type: input
-name: Test Z: {['++','+','+.01','+.05','+.1','+.5','-.5','-.1','-.05','-.01','-','--'][menu.input|int]}
+name: Test Z: {['-1.0', '-0.5', '-0.1', '-.05', '-.01', '0.0', '+0.01', '+0.05', '+0.1', '+0.5', '+1.0'][menu.input|int]}
 input: 5
 input_min: 0
-input_max: 11
+input_max: 10
 input_step: 1
 gcode:
   {%- if menu.event == 'long_click' -%}
-    TESTZ Z={['++','+','+.01','+.05','+.1','+.5','-.5','-.1','-.05','-.01','-','--'][menu.input|int]}
+    TESTZ Z={['-1.0', '-0.5', '-0.1', '-.05', '-.01', '0', '+0.01', '+0.05', '+0.1', '+0.5', '+1.0'][menu.input|int]}
   {%- endif -%}
 
 [menu __main __setup __calib __Z_offset __test_z_live]