##################################################################### # Displays ##################################################################### [board_pins] aliases: # EXP1 header EXP1_1=PE8, EXP1_2=PE7, EXP1_3=PE9, EXP1_4=PE10, EXP1_5=PE12, EXP1_6=PE13, # Slot in the socket on this side EXP1_7=PE14, EXP1_8=PE15, EXP1_9=, EXP1_10=<5V>, # EXP2 header EXP2_1=PA6, EXP2_2=PA5, EXP2_3=PB1, EXP2_4=PA4, EXP2_5=PB2, EXP2_6=PA7, # Slot in the socket on this side EXP2_7=PC15, EXP2_8=, EXP2_9=, EXP2_10=<5V> [display] # mini12864 LCD Display lcd_type: uc1701 cs_pin: EXP1_3 a0_pin: EXP1_4 rst_pin: EXP1_5 encoder_pins: ^EXP2_5, ^EXP2_3 click_pin: ^!EXP1_2 contrast: 63 spi_software_miso_pin: EXP2_1 spi_software_mosi_pin: EXP2_6 spi_software_sclk_pin: EXP2_2 # display_group: __voron_display [neopixel btt_mini12864] # To control Neopixel RGB in mini12864 display pin: EXP1_6 chain_count: 3 initial_RED: 0.1 initial_GREEN: 0.5 initial_BLUE: 0.0 color_order: RGB # Set RGB values on boot up for each Neopixel. # Index 1 = display, Index 2 and 3 = Knob [delayed_gcode setdisplayneopixel] initial_duration: 1 gcode: SET_LED LED=btt_mini12864 RED=0.50 GREEN=0.00 BLUE=0.00 INDEX=1 TRANSMIT=0 SET_LED LED=btt_mini12864 RED=0.13 GREEN=0.16 BLUE=1.00 INDEX=2 TRANSMIT=0 SET_LED LED=btt_mini12864 RED=0.13 GREEN=0.16 BLUE=1.00 INDEX=3 ##################################################################### # Display Menu definition ##################################################################### # Removed items [menu __main __octoprint] type: disabled ## Control [menu __main __control __home] type: disabled [menu __main __control __homez] type: disabled [menu __main __control __homexy] type: disabled ## PreHeat [menu __main __temp __preheat_pla] type: disabled [menu __main __temp __preheat_abs] type: disabled ## use own load and unload macro [menu __main __filament __loadf] type: disabled [menu __main __filament __loads] type: disabled [menu __main __filament __unloadf] type: disabled [menu __main __filament __unloads] type: disabled ## Control [menu __main __control __home] type: disabled [menu __main __control __homez] type: disabled [menu __main __control __homexy] type: disabled # Bed Probe [menu __main __setup __calib __bedprobe] type: disabled ## Delta Calibration [menu __main __setup __calib __delta_calib_auto] type: disabled [menu __main __setup __calib __delta_calib_man] type: disabled # Added Items to the Stock menu ## Control [menu __main __control __home] type: input enable: {not printer.idle_timeout.state == "Printing"} name: Home: {['noop', 'ALL', 'XY', 'Z'][menu.input|int]} input: 0 input_min: 0 input_max: 3 input_step: 1 gcode: {%- if menu.event == 'long_click' -%} {[' ', 'G28', 'G28 XY', 'G28 Z'][menu.input|int]} {%- endif -%} [menu __main __control __move] type: input enable: {not printer.idle_timeout.state == "Printing"} name: Move: {['FRONT CENTER', 'CENTER', 'REAR CENTER'][menu.input|int]} input: 0 input_min: 0 input_max: 2 input_step: 1 gcode: {%- if menu.event == 'long_click' -%} CENTER {['Y=15', '', 'Y=290'][menu.input|int]} {%- endif -%} ## Filament [menu __main __filament __preheat] type: input enable: {not printer.idle_timeout.state == "Printing"} name: Preheat: {['Off', 'ABS', 'PLA', 'PET'][menu.input|int]} input: 0 input_min: 0 input_max: 3 input_step: 1 gcode: {%- if menu.event == 'long_click' -%} M104 S{[0, 215, 190, 200][menu.input|int]} {%- endif -%} [menu __main __filament __filament_load] type: input enable: {not printer.idle_timeout.state == "Printing"} name: Filament: {['noop', 'Load', 'Unload', 'Purge (10mm)'][menu.input|int]} input: 0 input_min: 0 input_max: 3 input_step: 1 gcode: {%- if menu.event == 'long_click' -%} {% if printer.extruder.can_extrude|lower == 'true' %} M83 G1 {['E0', 'E50 F3000', 'E-75 F3000', 'E10 F300'][menu.input|int]} G1 {['E0', 'E35 F300', 'E0', 'E0'][menu.input|int]} M82 {% else %} {action_respond_info("extruder not hot enough")} {%- endif -%} {%- endif -%} ## Calibration [menu __main __setup __calib __bedprobe] type: command enable: {not printer.idle_timeout.state == "Printing"} name: Bed probe gcode: {%- if printer.toolhead.position.y|float < 270 -%} PROBE {%- else -%} {action_respond_info("Won't probe inunsafe position")} {%- endif -%} ## Probe & Endstop Z-Offset calibration [menu __main __setup __calib __Z_offset] type: list enable: {not printer.idle_timeout.state == "Printing"} name: Z offset [menu __main __setup __calib __Z_offset __start] type: input enable: {not printer.idle_timeout.state == "Printing"} name: Calibrate: {['noop','Probe','Endstop'][menu.input|int]} input: 0 input_min: 0 input_max: 2 input_step: 1 gcode: {%- if menu.event == 'long_click' -%} {menu.back()} {%- endif -%} {%- if menu.input|int == 1 -%} {% if "xyz" in printer.toolhead.homed_axes %} {action_respond_info("Start Probe calibration")} CENTER PROBE_CALIBRATE {%- else -%} {action_respond_info("Printer not homed")} {%- endif -%} {%- elif menu.input|int == 2 -%} {% if "xyz" in printer.toolhead.homed_axes %} {action_respond_info(" Start Z-Endstop calibration")} CENTER Z_ENDSTOP_CALIBRATE {%- else -%} {action_respond_info("Printer not homed")} {%- endif -%} {%- endif -%} [menu __main __setup __calib __Z_offset __move_z] type: input name: Move Z: {'%03.2f' % menu.input} input: {printer.gcode_move.gcode_position.z} input_step: 1 realtime: True gcode: {%- if menu.event == 'change' -%} G1 Z{'%.2f' % menu.input} {%- elif menu.event == 'long_click' -%} G1 Z{'%.2f' % menu.input} SAVE_GCODE_STATE NAME=__move__axis G91 G1 Z2 G1 Z-2 RESTORE_GCODE_STATE NAME=__move__axis {%- endif -%} [menu __main __setup __calib __Z_offset __test_z] type: input name: Test Z: {['-1.0', '-0.5', '-0.1', '-.05', '-.01', '0.0', '+0.01', '+0.05', '+0.1', '+0.5', '+1.0'][menu.input|int]} input: 5 input_min: 0 input_max: 10 input_step: 1 gcode: {%- if menu.event == 'long_click' -%} TESTZ Z={['-1.0', '-0.5', '-0.1', '-.05', '-.01', '0', '+0.01', '+0.05', '+0.1', '+0.5', '+1.0'][menu.input|int]} {%- endif -%} [menu __main __setup __calib __Z_offset __test_z_live] type: input name: Test Z : {'%03.3f' % menu.input} input: 0 input_min: -5.0 input_max: 5.0 input_step: 0.01 realtime: True gcode: {%- if menu.event == 'long_click' -%} TESTZ Z={'%.3f' % menu.input} {%- endif -%} [menu __main __setup __calib __Z_offset __accept] type: command name: Accept gcode: ACCEPT [menu __main __setup __calib __Z_offset __abort] type: command name: Abort gcode: ABORT [menu __main __setup __calib __Z_offset __saveconfig] type: command name: Save config gcode: SAVE_CONFIG