#####################################################################
#    Macros
#####################################################################
[gcode_macro PRINT_START]
gcode:
    {% set bed_temp = params.BED_TEMP|default(100)|float %}
    {% set extruder_temp = params.EXTRUDER_TEMP|default(220)|float %}
    {% set z_adjust = params.Z_ADJUST|default(0.0)|float %}
    {% set retract = 10 %}
    BED_MESH_CLEAR                    ; clear mesh
    _CG28                             ; Home the printer
    G90                               ; Use absolute coordinates
    PARKCENTER                        ; Move to center
    M117 Heating..
    _HEATER_ON
    M106 S255                         ; set print fan to full speed
    M140 S{bed_temp}                  ; Start bed heating
    M190 S{bed_temp}                  ; Wait for bed to reach temperature
    M109 S{extruder_temp}             ; Set and wait for nozzle to reach temperature
    M107                              ; turn print fan off
    QUAD_GANTRY_LEVEL PARK=false
    M109 S{extruder_temp}             ; Set and wait for nozzle to reach temperature
    clean_nozzle                      ; clean nozzle
    CALIBRATE_Z
    #BED_MESH_PROFILE LOAD=default   ; load mesh if needed
    # Adjust the G-Code Z offset with the Z_ADJUST parameter if needed
    #SET_GCODE_OFFSET Z_ADJUST={z_adjust} MOVE=1
    M117 Intro Line..
    G90                               ; Use absolute coordinates
    G1 Y0 X130 Z5 F12000              ; Move the nozzle to the front and near the bed
    G1 Z0.7 F300                      ; Move the nozzle very close to the bed
    G92 E0.0                          ; set extruder position to 0
    G1 E{retract} F3600               ; extrude retract
    G92 E0.0                          ; set extruder option to 0
    G1 X180 E15.0 F500.0              ; intro line
    G92 E0.0                          ; set extruder Poisson to 0
    G1 X174 F6000                     ; move away from intro line
    M117

[gcode_macro PARKCENTER]
gcode:
    {% set Z = params.Z|default(30)|float %}
    SAVE_GCODE_STATE NAME=PARKCENTER_state
    _CG28                          ; Home if not already homed
    G90                            ; absolute positioning
    G0 X150 Y150 Z{Z} F12000       ; move to center
    RESTORE_GCODE_STATE NAME=PARKCENTER_state