662 lines
22 KiB
INI
662 lines
22 KiB
INI
# This macro was provided by discord user Garrettwp to whom i give my thanks for sharing it with me.
|
|
# I have tweaked it a lot.
|
|
#
|
|
# this macro is based on the great Annex magprobe dockable probe macros "#Originally developed by Mental, modified for better use on K-series printers by RyanG and Trails"
|
|
# that macro can be found here https://github.com/Annex-Engineering/Annex-Engineering_Other_Printer_Mods/blob/master/All_Printers/Microswitch_Probe/Klipper_Macros/dockable_probe_macros.cfg
|
|
#
|
|
# by standing on the shoulders of giants, lets see if we can see further
|
|
# Klicky-probe.cfg version 11-10-2021 01
|
|
|
|
[gcode_macro _User_Variables]
|
|
variable_verbose: True # Enable verbose output
|
|
variable_travel_speed: 200 # how fast all other travel moves will be performed when running these macros
|
|
variable_dock_speed: 50 # how fast should the toolhead move when docking the probe for the final movement
|
|
variable_release_speed: 100 # how fast should the toolhead move to release the hold of the magnets after docking
|
|
variable_z_drop_speed: 20 # how fast the z will lower when moving to the z location to clear the probe
|
|
variable_home_z_height: 20 # Z when homing
|
|
variable_allow_g28xy_without_z: 0 # forces the initial G28 to calibrate X Y and Z, otherwise you could only do one axis and potentially hit the bed or gantry (by doing only a G28 Z)
|
|
variable_max_bed_y: 250 #maximum Bed size avoids doing a probe_accuracy outside the bed
|
|
|
|
|
|
# if a separate Z endstop switch is in
|
|
# use, specify the coordinates of the switch here (Voron).
|
|
# Set to 0 to have the probe move to center of bed
|
|
variable_z_endstop_x: 208
|
|
variable_z_endstop_y: 305
|
|
|
|
# location to park the toolhead
|
|
variable_park_toolhead: False # Enable toolhead parking
|
|
variable_parkposition_x: 125
|
|
variable_parkposition_y: 125
|
|
variable_parkposition_z: 30
|
|
|
|
#dock location
|
|
variable_docklocation_x: 148 # X Dock position
|
|
variable_docklocation_y: 305 # Y Dock position
|
|
variable_docklocation_z: -128 # Z dock position (-128 for a gantry mount)
|
|
variable_dockarmslenght: 30 # Dock arms lenght, toolhead movement necessary to clear the dock arms
|
|
|
|
#Umbilical to help untangle the umbilical in difficult situations
|
|
variable_umbilical_x: 15 #X umbilical position
|
|
variable_umbilical_y: 15 #Y umbilical position
|
|
variable_umbilical: False #should we untabgle the umbilical
|
|
|
|
# Do not modify below
|
|
gcode:
|
|
{% set Mx = printer['configfile'].config["stepper_x"]["position_max"]|float %}
|
|
{% set My = printer['configfile'].config["stepper_y"]["position_max"]|float %}
|
|
{% set Ox = printer['configfile'].config["probe"]["x_offset"]|float %}
|
|
{% set Oy = printer['configfile'].config["probe"]["y_offset"]|float %}
|
|
{% set Oz = printer['configfile'].config["probe"]["z_offset"]|float %}
|
|
|
|
# if docklocation_z is zero, use Home Z height for safety
|
|
{% if docklocation_z == 0 %}
|
|
SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=docklocation_z VALUE={ home_z_height }
|
|
{% endif %}
|
|
|
|
# If x, y coordinates are set for z endstop, assign them
|
|
{% if z_endstop_x != 0 or z_endstop_y != 0 %}
|
|
SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_x VALUE={ z_endstop_x }
|
|
SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_y VALUE={ z_endstop_y }
|
|
|
|
# if no x, y coordinates for z endstop, assume probe is endstop and move toolhead to center of bed
|
|
{% else %}
|
|
SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_x VALUE={ (Mx * 0.5) - Ox }
|
|
SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_y VALUE={ (My * 0.5) - Oy }
|
|
{% endif %}
|
|
|
|
|
|
[gcode_macro _Probe_Variables]
|
|
variable_probe_attached: False
|
|
variable_probe_state: False
|
|
variable_probe_lock: False
|
|
variable_z_endstop_x: 0
|
|
variable_z_endstop_y: 0
|
|
gcode:
|
|
|
|
|
|
[gcode_macro _Homing_Variables]
|
|
gcode:
|
|
{% set R = params.RESET|default(0) %}
|
|
|
|
{% if R %}
|
|
SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ False }
|
|
{% endif %}
|
|
|
|
# Attach probe and lock it
|
|
[gcode_macro Attach_Probe_Lock]
|
|
description: Attaches Klicky Probe, can only be docked after unlocking
|
|
gcode:
|
|
Attach_Probe
|
|
SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ True }
|
|
|
|
|
|
# Dock probe and lock it
|
|
[gcode_macro Dock_Probe_Unlock]
|
|
description: Docks Klicky Probe even if it was locked
|
|
gcode:
|
|
SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ False }
|
|
Dock_Probe
|
|
|
|
# Unlock Probe
|
|
[gcode_macro Probe_Unlock]
|
|
description: Unlocks Klicky Probe state
|
|
gcode:
|
|
SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ False }
|
|
|
|
# Lock Probe
|
|
[gcode_macro Probe_Lock]
|
|
description: Locks Klicky Probe state
|
|
gcode:
|
|
SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ True }
|
|
|
|
# Attach Probe Routine
|
|
[gcode_macro Attach_Probe]
|
|
description: Attaches Klicky Probe
|
|
gcode:
|
|
# Get probe attach status
|
|
{% set P = printer["gcode_macro _Probe_Variables"].probe_attached %}
|
|
{% set L = printer["gcode_macro _Probe_Variables"].probe_lock %}
|
|
{% set V = printer["gcode_macro _User_Variables"].verbose %}
|
|
# Get Docking location
|
|
{% set Dx = printer["gcode_macro _User_Variables"].docklocation_x %}
|
|
{% set Dy = printer["gcode_macro _User_Variables"].docklocation_y %}
|
|
{% set Dz = printer["gcode_macro _User_Variables"].docklocation_z %}
|
|
{% set Da = printer["gcode_macro _User_Variables"].dockarmslenght %}
|
|
# Safe Z for travel
|
|
{% set Hzh = printer["gcode_macro _User_Variables"].home_z_height|float %}
|
|
#Set speed
|
|
{% set St = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
|
|
|
|
#prior to saving actual position, check if its necessary to move to a safe Z
|
|
#that has enought overhead for the attached probe
|
|
{% if (printer.toolhead.position.z < Hzh) %}
|
|
G1 Z{Hzh} F1200
|
|
{% endif %}
|
|
M400 # mandatory to save the new safe position
|
|
#allows the docking position to be independent of the Z offset, necessary for bed mounted probes
|
|
SAVE_GCODE_STATE name=_attachProbe
|
|
SET_GCODE_OFFSET Z=0
|
|
|
|
# if x and y are not homed
|
|
{% if not 'xy' in printer.toolhead.homed_axes %}
|
|
{ action_raise_error("Must Home X and Y Axis First!") }
|
|
|
|
# If probe not attached and locked
|
|
{% elif not P and not L %}
|
|
{% if V %}
|
|
{ action_respond_info("Attaching Probe") }
|
|
{% endif %}
|
|
G90
|
|
|
|
{% if (not 'z' in printer.toolhead.homed_axes) %}
|
|
{% if V %}
|
|
{ action_respond_info("Resetting Z position to zero") }
|
|
{% endif %}
|
|
SET_KINEMATIC_POSITION Z=0
|
|
{% endif %}
|
|
|
|
{% if (printer.toolhead.position.z < Hzh) %}
|
|
G1 Z{Hzh} F1200
|
|
{% endif %}
|
|
|
|
_Umbilical_Path
|
|
|
|
# Probe entry location
|
|
G1 X{Dx} Y{Dy|int - Da|int} F{St}
|
|
{% if Dz != -128 %}
|
|
#lower to Z dock
|
|
G1 Z{Dz} F600
|
|
{% endif %}
|
|
# pickup from Probe location
|
|
G1 X{Dx} Y{Dy} F1800
|
|
# Probe entry location
|
|
G1 X{Dx} Y{Dy|int - Da|int} F6000
|
|
#Go to Z safe distance
|
|
{% if (printer.toolhead.position.z < Hzh) %}
|
|
G1 Z{Hzh} F600
|
|
{% endif %}
|
|
_Park_Toolhead
|
|
|
|
_CheckProbe action=attach
|
|
|
|
{% elif L %}
|
|
{% if V %}
|
|
{ action_respond_info("Probe locked!") }
|
|
{% endif %}
|
|
|
|
# Probe attached, do nothing
|
|
_CheckProbe action=query
|
|
|
|
{% else %}
|
|
{% if V %}
|
|
{ action_respond_info("Probe already attached!") }
|
|
{% endif %}
|
|
|
|
# Probe attached, do nothing
|
|
_CheckProbe action=query
|
|
|
|
{% endif %}
|
|
#reverts to the original Z offset
|
|
RESTORE_GCODE_STATE name=_attachProbe
|
|
|
|
|
|
# Dock Probe Routine
|
|
[gcode_macro Dock_Probe]
|
|
description: Docks Klicky Probe
|
|
gcode:
|
|
# Get probe attach status
|
|
{% set P = printer["gcode_macro _Probe_Variables"].probe_attached %}
|
|
{% set L = printer["gcode_macro _Probe_Variables"].probe_lock %}
|
|
{% set V = printer["gcode_macro _User_Variables"].verbose %}
|
|
# Get Docking location
|
|
{% set Dx = printer["gcode_macro _User_Variables"].docklocation_x %}
|
|
{% set Dy = printer["gcode_macro _User_Variables"].docklocation_y %}
|
|
{% set Dz = printer["gcode_macro _User_Variables"].docklocation_z %}
|
|
{% set Da = printer["gcode_macro _User_Variables"].dockarmslenght %}
|
|
# Safe Z for travel
|
|
{% set Hzh = printer["gcode_macro _User_Variables"].home_z_height|float %}
|
|
# Set speed
|
|
{% set St = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
|
|
{% set Sd = printer["gcode_macro _User_Variables"].dock_speed * 60 %}
|
|
{% set Sr = printer["gcode_macro _User_Variables"].release_speed * 60 %}
|
|
{% set Sz = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
|
|
|
|
M400 # mandatory to save the new safe position
|
|
#allows the docking position to be independent of the Z offset, necessary for bed mounted probes
|
|
SAVE_GCODE_STATE name=_dockProbe
|
|
SET_GCODE_OFFSET Z=0
|
|
|
|
{% if not 'xyz' in printer.toolhead.homed_axes %}
|
|
{ action_raise_error("Must Home X, Y and Z Axis First!") }
|
|
|
|
# If probe not attached and not locked
|
|
{% elif P and not L %}
|
|
{% if V %}
|
|
{ action_respond_info("Docking Probe") }
|
|
{% endif %}
|
|
G90
|
|
|
|
{% if (printer.toolhead.position.z < Hzh) %}
|
|
G1 Z{Hzh} F{Sz}
|
|
{% endif %}
|
|
|
|
_Umbilical_Path
|
|
|
|
# Probe entry location
|
|
G1 X{Dx} Y{Dy|int - Da|int} F{St}
|
|
{% if Dz != -128 %}
|
|
#lower to Z dock
|
|
G1 Z{Dz} F600
|
|
{% endif %}
|
|
# Drop Probe to Probe location
|
|
G1 X{Dx} Y{Dy} F{Sd}
|
|
# Probe decoupling
|
|
G1 X{Dx|int + 40} Y{Dy} F{Sr}
|
|
#Go to Z safe distance
|
|
{% if (printer.toolhead.position.z < Hzh) %}
|
|
G1 Z{Hzh} F600
|
|
{% endif %}
|
|
|
|
_Park_Toolhead
|
|
|
|
G4 P1000
|
|
_CheckProbe action=dock
|
|
|
|
{% elif L %}
|
|
{% if V %}
|
|
{ action_respond_info("Probe locked!") }
|
|
{% endif %}
|
|
|
|
# Probe docked, do nothing
|
|
_CheckProbe action=query
|
|
|
|
{% else %}
|
|
{% if V %}
|
|
{ action_respond_info("Probe already docked!") }
|
|
{% endif %}
|
|
|
|
# Probe docked, do nothing
|
|
_CheckProbe action=query
|
|
|
|
{% endif %}
|
|
#reverts to the original Z offset
|
|
RESTORE_GCODE_STATE name=_dockProbe
|
|
|
|
|
|
|
|
# Quad Gantry Level
|
|
[gcode_macro QUAD_GANTRY_LEVEL]
|
|
rename_existing: _QUAD_GANTRY_LEVEL
|
|
description: Conform a moving, twistable gantry to the shape of a stationary bed with klicky automount
|
|
gcode:
|
|
{% set V = printer["gcode_macro _User_Variables"].verbose %}
|
|
{% if V %}
|
|
{ action_respond_info("QG Level") }
|
|
{% endif %}
|
|
|
|
_CheckProbe action=query
|
|
Attach_Probe
|
|
|
|
_QUAD_GANTRY_LEVEL {% for p in params
|
|
%}{'%s=%s ' % (p, params[p])}{%
|
|
endfor %}
|
|
Dock_Probe
|
|
|
|
|
|
# Z Tilt Adjust
|
|
#[gcode_macro Z_TILT_ADJUST]
|
|
#rename_existing: _Z_TILT_ADJUST
|
|
#description:
|
|
#gcode:
|
|
# {% set V = printer["gcode_macro _User_Variables"].verbose %}
|
|
# {% if V %}
|
|
# { action_respond_info("Z Tilt Adjust") }
|
|
# {% endif %}
|
|
#
|
|
# _CheckProbe action=query
|
|
# Attach_Probe
|
|
#
|
|
# _Z_TILT_ADJUST {% for p in params
|
|
# %}{'%s=%s ' % (p, params[p])}{%
|
|
# endfor %}
|
|
# G28 Z0
|
|
# Dock_Probe
|
|
|
|
|
|
# Screws Tilt Adjust
|
|
#gcode_macro SCREWS_TILT_CALCULATE]
|
|
#rename_existing: _SCREWS_TILT_CALCULATE
|
|
#description:
|
|
#gcode:
|
|
# {% set V = printer["gcode_macro _User_Variables"].verbose %}
|
|
# {% if V %}
|
|
# { action_respond_info("Screws Tilt Adjust") }
|
|
# {% endif %}
|
|
#
|
|
# _CheckProbe action=query
|
|
# Attach_Probe
|
|
#
|
|
# _SCREWS_TILT_CALCULATE {% for p in params
|
|
# %}{'%s=%s ' % (p, params[p])}{%
|
|
# endfor %}
|
|
#
|
|
# Dock_Probe
|
|
|
|
# Bed Mesh Calibrate
|
|
[bed_mesh]
|
|
|
|
[gcode_macro BED_MESH_CALIBRATE]
|
|
rename_existing: _BED_MESH_CALIBRATE
|
|
description: Perform Mesh Bed Leveling with klicky automount
|
|
gcode:
|
|
|
|
{% set V = printer["gcode_macro _User_Variables"].verbose %}
|
|
{% if V %}
|
|
{ action_respond_info("Bed Mesh Calibrate") }
|
|
{% endif %}
|
|
|
|
_CheckProbe action=query
|
|
Attach_Probe
|
|
|
|
_BED_MESH_CALIBRATE {% for p in params
|
|
%}{'%s=%s ' % (p, params[p])}{%
|
|
endfor %}
|
|
|
|
Dock_Probe
|
|
|
|
|
|
# Probe Calibrate
|
|
[gcode_macro PROBE_CALIBRATE]
|
|
rename_existing: _PROBE_CALIBRATE
|
|
description:Calibrate the probe's z_offset with klicky automount
|
|
gcode:
|
|
{% set Hzh = printer["gcode_macro _User_Variables"].home_z_height|float %}
|
|
{% set Sz = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
|
|
{% set St = printer["gcode_macro _User_Variables"].travel_speed %}
|
|
{% set Mx = printer['configfile'].config["stepper_x"]["position_max"]|float %}
|
|
{% set My = printer['configfile'].config["stepper_y"]["position_max"]|float %}
|
|
{% set Ox = printer['configfile'].config["probe"]["x_offset"]|float %}
|
|
{% set Oy = printer['configfile'].config["probe"]["y_offset"]|float %}
|
|
|
|
# Go to Z safe distance before saving location in order to
|
|
# avoid crashing the probe on the bed when coming back
|
|
G1 Z{Hzh} F{Sz}
|
|
#Protect against PROBE CALIBRATE performed from outside the bed
|
|
{% if (printer['gcode_move'].position.y > (My - Oy)) or (printer['gcode_move'].position.x > (Mx - Ox)) or (printer['gcode_move'].position.x < Ox) %}
|
|
{ action_raise_error("Must perform PROBE_CALIBRATE with the probe above the BED!!!") }
|
|
{% endif%}
|
|
M400 # mandatory to save the new safe position
|
|
SAVE_GCODE_STATE NAME=_original_nozzle_location
|
|
|
|
_CheckProbe action=query
|
|
Attach_Probe
|
|
|
|
# Restore nozzle location to probe the right place
|
|
RESTORE_GCODE_STATE NAME=_original_nozzle_location MOVE=1 MOVE_SPEED={St}
|
|
|
|
_PROBE_CALIBRATE {% for p in params
|
|
%}{'%s=%s ' % (p, params[p])}{%
|
|
endfor %}
|
|
|
|
#store current nozzle location
|
|
SAVE_GCODE_STATE NAME=_original_nozzle_location
|
|
Dock_Probe
|
|
|
|
# Restore nozzle location again at the end
|
|
RESTORE_GCODE_STATE NAME=_original_nozzle_location MOVE=1 MOVE_SPEED={St}
|
|
|
|
|
|
# Probe Accuracy
|
|
[gcode_macro PROBE_ACCURACY]
|
|
rename_existing: _PROBE_ACCURACY
|
|
description:Probe Z-height accuracy at current XY position with klicky automount
|
|
gcode:
|
|
{% set Hzh = printer["gcode_macro _User_Variables"].home_z_height|float %}
|
|
{% set Sz = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
|
|
{% set St = printer["gcode_macro _User_Variables"].travel_speed %}
|
|
{% set By = printer["gcode_macro _User_Variables"].max_bed_y %}
|
|
{% set Oy = printer['configfile'].config["probe"]["y_offset"]|float %}
|
|
|
|
# Go to Z safe distance before saving location in order to
|
|
# avoid crashing the probe on the bed when coming back
|
|
G1 Z{Hzh} F{Sz}
|
|
#Protect against PROBE ACCURACY performed from outside the bed
|
|
{% if (printer.toolhead.position.y > (By - Oy)) %}
|
|
{ action_raise_error("Must perform PROBE_ACCURACY with the probe above the BED!!!") }
|
|
{% endif%}
|
|
M400 # mandatory to save the new safe position
|
|
SAVE_GCODE_STATE NAME=_original_nozzle_location
|
|
|
|
_CheckProbe action=query
|
|
Attach_Probe
|
|
|
|
# Restore nozzle location to probe the right place
|
|
RESTORE_GCODE_STATE NAME=_original_nozzle_location MOVE=1 MOVE_SPEED={St}
|
|
|
|
_PROBE_ACCURACY {% for p in params
|
|
%}{'%s=%s ' % (p, params[p])}{%
|
|
endfor %}
|
|
|
|
#store current nozzle location
|
|
SAVE_GCODE_STATE NAME=_original_nozzle_location
|
|
|
|
Dock_Probe
|
|
|
|
# Restore nozzle location again at the end
|
|
RESTORE_GCODE_STATE NAME=_original_nozzle_location MOVE=1 MOVE_SPEED={St}
|
|
|
|
|
|
# enable to SET_KINEMATIC_POSITION for Z hop
|
|
[force_move]
|
|
enable_force_move: True
|
|
|
|
# Homeing Override
|
|
[homing_override]
|
|
axes: xyz
|
|
gcode:
|
|
# collect user state variables
|
|
_User_Variables
|
|
{% set V = printer["gcode_macro _User_Variables"].verbose %}
|
|
{% set XYwZ = printer["gcode_macro _User_Variables"].allow_g28xy_without_z %}
|
|
{% set Hzh = printer["gcode_macro _User_Variables"].home_z_height|float %}
|
|
|
|
_CheckProbe action=query
|
|
|
|
# reset parameters
|
|
{% set X, Y, Z = False, False, False %}
|
|
|
|
# which axes have been requested for homing
|
|
{% if not 'X' in params
|
|
and not 'Y' in params
|
|
and not 'Z' in params %}
|
|
|
|
{% set X, Y, Z = True, True, True %}
|
|
|
|
{% else %}
|
|
{% if 'X' in params %}
|
|
{% set X = True %}
|
|
{% endif %}
|
|
|
|
{% if 'Y' in params %}
|
|
{% set Y = True %}
|
|
{% endif %}
|
|
|
|
{% if 'Z' in params %}
|
|
{% set Z = True %}
|
|
{% endif %}
|
|
|
|
{% if 'X' in params
|
|
and 'Y' in params
|
|
and 'Z' in params %}
|
|
# reset homing state variables
|
|
# if homing all axes
|
|
_Homing_Variables reset=1
|
|
{% endif %}
|
|
|
|
{% endif %}
|
|
|
|
{% if ('z' in printer.toolhead.homed_axes) %}
|
|
{% if (printer.toolhead.position.z < Hzh) %}
|
|
{% if V %}
|
|
{ action_respond_info("Z too low, performing ZHOP") }
|
|
{% endif %}
|
|
G1 Z{Hzh} F1200
|
|
{% endif %}
|
|
{% else %}
|
|
#checks if it's allowed to do initially G28 X/Y without doing a G28 Z
|
|
{% if ( XYwZ == 0) %}
|
|
{% if V %}
|
|
{ action_respond_info("Z not homed, forcing full G28") }
|
|
{% endif %}
|
|
SET_KINEMATIC_POSITION X=0 Y=0 Z=0
|
|
G1 Z{Hzh} F600
|
|
{% set X, Y, Z = True, True, True %}
|
|
{% endif %}
|
|
{% endif %}
|
|
|
|
# Home x
|
|
{% if X %}
|
|
{% if V %}
|
|
{ action_respond_info("Homing X") }
|
|
{% endif %}
|
|
G28 X0
|
|
{% endif %}
|
|
|
|
# Home y
|
|
{% if Y %}
|
|
{% if V %}
|
|
{ action_respond_info("Homing Y") }
|
|
{% endif %}
|
|
G28 Y0
|
|
{% endif %}
|
|
|
|
# Home z
|
|
{% if Z %}
|
|
{% if V %}
|
|
{ action_respond_info("Homing Z") }
|
|
{% endif %}
|
|
|
|
# if probe is configured as endstop, attach it, else dock the probe if attached
|
|
{% if printer['configfile'].config["stepper_z"]["endstop_pin"] == 'probe:z_virtual_endstop' %}
|
|
Attach_Probe
|
|
{% else %}
|
|
Dock_Probe
|
|
{% endif %}
|
|
|
|
_Home_Z
|
|
|
|
|
|
# if probe is configured as endstop, dock it
|
|
{% if printer['configfile'].config["stepper_z"]["endstop_pin"] == 'probe:z_virtual_endstop' %}
|
|
Dock_Probe
|
|
{% endif %}
|
|
{% endif %}
|
|
_CheckProbe action=query
|
|
|
|
# park the toolhead
|
|
_Park_Toolhead
|
|
|
|
# umbilical path setup
|
|
[gcode_macro _Umbilical_Path]
|
|
gcode:
|
|
{% set Ux = printer["gcode_macro _User_Variables"].umbilical_x %}
|
|
{% set Uy = printer["gcode_macro _User_Variables"].umbilical_y %}
|
|
{% set U = printer["gcode_macro _User_Variables"].umbilical %}
|
|
{% set Hzh = printer["gcode_macro _User_Variables"].home_z_height|float %}
|
|
{% set St = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
|
|
|
|
{% if U %}
|
|
# Used to give the umbilical a better path to follow and coil properly if dock is tight in space
|
|
G1 X{Ux} Y{Uy} Z{Hzh} F{St}
|
|
{% endif %}
|
|
|
|
|
|
# Home Z Routine
|
|
[gcode_macro _Home_Z]
|
|
gcode:
|
|
{% set Zx = printer["gcode_macro _Probe_Variables"].z_endstop_x %}
|
|
{% set Zy = printer["gcode_macro _Probe_Variables"].z_endstop_y %}
|
|
{% set Hzh = printer["gcode_macro _User_Variables"].home_z_height|float %}
|
|
{% set St = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
|
|
{% set Sz = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
|
|
|
|
# if x and y are not homed yet, raise error
|
|
{% if not 'xy' in printer.toolhead.homed_axes %}
|
|
{ action_raise_error("Must Home X and Y Axis First!") }
|
|
|
|
{% else %}
|
|
{% if (not 'z' in printer.toolhead.homed_axes) %}
|
|
{% if V %}
|
|
{ action_respond_info("Resetting Z position to zero") }
|
|
{% endif %}
|
|
SET_KINEMATIC_POSITION Z=0
|
|
{% endif %}
|
|
|
|
# move tool to safe homing position and home Z axis
|
|
# location of z endstop
|
|
G1 X{Zx} Y{Zy} Z{Hzh} F{St}
|
|
G28 Z0
|
|
G1 Z{Hzh} F{Sz}
|
|
|
|
{% endif %}
|
|
|
|
|
|
# check to see if probe is where it is supposed to be after
|
|
# attaching/docking maneuver and set homing error or shutdown
|
|
[gcode_macro _CheckProbe]
|
|
variable_probe_state: 0
|
|
gcode:
|
|
Query_Probe
|
|
_SetProbeState action={ ACTION }
|
|
|
|
|
|
# due to how templates are evaluated, we have query endstops in one
|
|
# macro and call another macro to make decisions based on the result
|
|
[gcode_macro _SetProbeState]
|
|
gcode:
|
|
{% set P = printer.probe.last_query %}
|
|
{% set V = printer["gcode_macro _User_Variables"].verbose %}
|
|
|
|
# If triggered (true), probe not attached
|
|
{% if P %}
|
|
SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_attached VALUE={ False }
|
|
|
|
# If not triggered (false), probe attached
|
|
{% else %}
|
|
SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_attached VALUE={ True }
|
|
{% endif %}
|
|
|
|
{% if params.ACTION == 'query' %}
|
|
SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_state VALUE={ P }
|
|
{% endif %}
|
|
|
|
# if probe fails to attach/detach
|
|
# if not docked
|
|
{% if (not P and params.ACTION == 'dock') %}
|
|
{ action_raise_error("Probe dock failed!") }
|
|
{% endif %}
|
|
|
|
# if not attached
|
|
{% if P and params.ACTION == 'attach' %}
|
|
{ action_raise_error("Probe attach failed!") }
|
|
{% endif %}
|
|
|
|
# Park Toolhead Routine
|
|
[gcode_macro _Park_Toolhead]
|
|
gcode:
|
|
{% set P = printer["gcode_macro _User_Variables"].park_toolhead %}
|
|
{% set Px = printer["gcode_macro _User_Variables"].parkposition_x %}
|
|
{% set Py = printer["gcode_macro _User_Variables"].parkposition_y %}
|
|
{% set Pz = printer["gcode_macro _User_Variables"].parkposition_z %}
|
|
{% set St = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
|
|
{% set V = printer["gcode_macro _User_Variables"].verbose %}
|
|
|
|
{% if (P and 'xyz' in printer.toolhead.homed_axes) %}
|
|
{% if V %}
|
|
{ action_respond_info("Parking Toolhead") }
|
|
{% endif %}
|
|
G90
|
|
G1 X{Px} Y{Py} Z{Pz} F{St}
|
|
{% endif %}
|
|
|