50 lines
1.7 KiB
INI
50 lines
1.7 KiB
INI
|
|
[gcode_macro G32]
|
|
gcode:
|
|
BED_MESH_CLEAR
|
|
G28
|
|
QUAD_GANTRY_LEVEL
|
|
G28
|
|
G0 X150 Y150 Z30 F3600
|
|
|
|
|
|
[gcode_macro PRINT_START]
|
|
# Use PRINT_START for the slicer starting script - please customise for your slicer of choice
|
|
gcode:
|
|
M140 S{BED} # start bed heating
|
|
M104 S{EXTRUDER} # start extruder heating
|
|
|
|
M117 home
|
|
G32 ; home all axes
|
|
G1 Z20 F3000 ; move nozzle away from bed
|
|
|
|
M117 wait for heating
|
|
G92 E0 # reset extruder
|
|
M190 S{BED} # set and wait for bed temperature
|
|
M109 S{EXTRUDER} # set and wait for nozzle temperature
|
|
|
|
M117 clean nozzle
|
|
G0 Z5 F300 # move Z to travel height
|
|
G0 X75 Y0 F5000 # move to start position
|
|
G0 Z0.2 F1500 # lower Z
|
|
G0 X225 Y0 Z0.2 E30 # draw line
|
|
G0 X225 Y0.8 Z0.2 # move to the side little
|
|
G0 X75 Y0.8 Z0.2 E15 # draw fine line
|
|
|
|
M117 starting
|
|
|
|
|
|
[gcode_macro PRINT_END]
|
|
# Use PRINT_END for the slicer ending script - please customise for your slicer of choice
|
|
gcode:
|
|
M400 ; wait for buffer to clear
|
|
G92 E0 ; zero the extruder
|
|
G1 E-10.0 F3600 ; retract filament
|
|
G91 ; relative positioning
|
|
G0 Z1.00 X20.0 Y20.0 F20000 ; move nozzle to remove stringing
|
|
TURN_OFF_HEATERS
|
|
M107 ; turn off fan
|
|
G1 Z2 F3000 ; move nozzle up 2mm
|
|
G90 ; absolute positioning
|
|
G0 X125 Y250 F3600 ; park nozzle at rear
|
|
BED_MESH_CLEAR
|