print: update

print/xk-v2_0.4N_0.2L.ini

@@ -1,4 +1,4 @@
-# generated by SuperSlicer 2.3.57 on 2021-11-21 at 15:06:29 UTC
+# generated by SuperSlicer 2.3.57 on 2021-12-30 at 20:13:01 UTC
 allow_empty_layers = 0
 avoid_crossing_not_first_layer = 1
 avoid_crossing_perimeters = 0
@@ -10,6 +10,7 @@ bridge_acceleration = 3000
 bridge_angle = 0
 bridge_flow_ratio = 100%
 bridge_overlap = 100%
+bridge_overlap_min = 80%
 bridge_speed = 60
 bridge_speed_internal = 150%
 bridged_infill_margin = 200%
@@ -127,7 +128,7 @@ only_one_perimeter_top = 1
 only_one_perimeter_top_other_algo = 0
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
-output_filename_format = {input_filename_base}_{nozzle_diameter[0]}N_{layer_height}L_{extrusion_multiplier}E_{filament_type[0]}_{print_time}.gcode
+output_filename_format = {input_filename_base}_{nozzle_diameter[0]}N_{layer_height}L_{fill_density}F_{extrusion_multiplier}E_{filament_type[0]}_{print_time}.gcode
 over_bridge_flow_ratio = 120%
 overhangs_reverse = 0
 overhangs_reverse_threshold = 250%
@@ -144,7 +145,7 @@ perimeter_loop_seam = rear
 perimeter_overlap = 100%
 perimeter_round_corners = 0
 perimeter_speed = 120
-perimeters = 4
+perimeters = 3
 post_process = 
 print_custom_variables = 
 print_extrusion_multiplier = 100%
@@ -154,6 +155,7 @@ print_settings_id = xk_0.2mm-0.4nozzle
 print_temperature = 0
 raft_layers = 0
 resolution = 0.002
+resolution_internal = 0.2
 seam_angle_cost = 100%
 seam_position = aligned
 seam_travel_cost = 100%
@@ -225,7 +227,7 @@ wipe_tower_brim = 80%
 wipe_tower_no_sparse_layers = 1
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
-wipe_tower_x = 30.6406
+wipe_tower_x = 30
-wipe_tower_y = 105.997
+wipe_tower_y = 30
 xy_inner_size_compensation = 0
 xy_size_compensation = 0

print/xk-v2_0.4N_0.2L_quality.ini

@@ -1,4 +1,4 @@
-# generated by SuperSlicer 2.3.57 on 2021-11-22 at 21:09:59 UTC
+# generated by SuperSlicer 2.3.57 on 2021-11-26 at 08:13:50 UTC
 allow_empty_layers = 0
 avoid_crossing_not_first_layer = 1
 avoid_crossing_perimeters = 0
@@ -10,6 +10,7 @@ bridge_acceleration = 3000
 bridge_angle = 0
 bridge_flow_ratio = 100%
 bridge_overlap = 100%
+bridge_overlap_min = 80%
 bridge_speed = 60
 bridge_speed_internal = 150%
 bridged_infill_margin = 200%
@@ -44,7 +45,7 @@ external_perimeter_cut_corners = 0%
 external_perimeter_extrusion_spacing = 
 external_perimeter_extrusion_width = 100%
 external_perimeter_overlap = 100%
-external_perimeter_speed = 60
+external_perimeter_speed = 50%
 external_perimeters_first = 0
 external_perimeters_hole = 1
 external_perimeters_nothole = 1
@@ -65,9 +66,9 @@ fill_smooth_width = 50%
 fill_top_flow_ratio = 100%
 first_layer_acceleration = 2000
 first_layer_extrusion_spacing = 
-first_layer_extrusion_width = 105%
+first_layer_extrusion_width = 120%
 first_layer_flow_ratio = 100%
-first_layer_height = 60%
+first_layer_height = 75%
 first_layer_infill_speed = 60
 first_layer_min_speed = 0
 first_layer_size_compensation = -0.1
@@ -127,7 +128,7 @@ only_one_perimeter_top = 1
 only_one_perimeter_top_other_algo = 0
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
-output_filename_format = {input_filename_base}_{nozzle_diameter[0]}N_{layer_height}L_{extrusion_multiplier}E_{filament_type[0]}_{print_time}.gcode
+output_filename_format = {input_filename_base}_{nozzle_diameter[0]}N_{layer_height}L_{fill_density}F_{extrusion_multiplier}E_{filament_type[0]}_{print_time}.gcode
 over_bridge_flow_ratio = 120%
 overhangs_reverse = 0
 overhangs_reverse_threshold = 250%
@@ -144,7 +145,7 @@ perimeter_loop_seam = rear
 perimeter_overlap = 100%
 perimeter_round_corners = 0
 perimeter_speed = 90
-perimeters = 4
+perimeters = 3
 post_process = 
 print_custom_variables = 
 print_extrusion_multiplier = 100%
@@ -154,6 +155,7 @@ print_settings_id = xk_0.2mm-0.4nozzle
 print_temperature = 0
 raft_layers = 0
 resolution = 0.002
+resolution_internal = 0.2
 seam_angle_cost = 100%
 seam_position = aligned
 seam_travel_cost = 100%
@@ -225,7 +227,7 @@ wipe_tower_brim = 80%
 wipe_tower_no_sparse_layers = 1
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
-wipe_tower_x = 56.5035
+wipe_tower_x = 30
-wipe_tower_y = 103.036
+wipe_tower_y = 30
 xy_inner_size_compensation = 0
 xy_size_compensation = 0

print/xk-v2_0.6N_0.3L.ini

@@ -0,0 +1,233 @@
+# generated by SuperSlicer 2.3.57 on 2021-11-25 at 21:44:56 UTC
+allow_empty_layers = 0
+avoid_crossing_not_first_layer = 1
+avoid_crossing_perimeters = 0
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0
+bridge_acceleration = 3000
+bridge_angle = 0
+bridge_flow_ratio = 100%
+bridge_overlap = 100%
+bridge_overlap_min = 80%
+bridge_speed = 60
+bridge_speed_internal = 150%
+bridged_infill_margin = 200%
+brim_ears = 0
+brim_ears_detection_length = 1
+brim_ears_max_angle = 120
+brim_ears_pattern = concentric
+brim_inside_holes = 0
+brim_offset = 0
+brim_width = 0
+brim_width_interior = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+complete_objects_one_brim = 0
+complete_objects_one_skirt = 0
+complete_objects_sort = object
+curve_smoothing_angle_concave = 0
+curve_smoothing_angle_convex = 0
+curve_smoothing_cutoff_dist = 2
+curve_smoothing_precision = 0
+default_acceleration = 3000
+dont_support_bridges = 1
+draft_shield = 0
+duplicate_distance = 5
+enforce_full_fill_volume = 1
+ensure_vertical_shell_thickness = 1
+exact_last_layer_height = 0
+external_infill_margin = 150%
+external_perimeter_cut_corners = 0%
+external_perimeter_extrusion_spacing = 
+external_perimeter_extrusion_width = 100%
+external_perimeter_overlap = 100%
+external_perimeter_speed = 50%
+external_perimeters_first = 0
+external_perimeters_hole = 1
+external_perimeters_nothole = 1
+external_perimeters_vase = 0
+extra_perimeters = 0
+extra_perimeters_odd_layers = 0
+extra_perimeters_overhangs = 0
+extruder_clearance_height = 2
+extruder_clearance_radius = 50
+extrusion_spacing = 
+extrusion_width = 100%
+fill_angle = 45
+fill_angle_increment = 0
+fill_density = 13%
+fill_pattern = gyroid
+fill_smooth_distribution = 14%
+fill_smooth_width = 50%
+fill_top_flow_ratio = 100%
+first_layer_acceleration = 2000
+first_layer_extrusion_spacing = 
+first_layer_extrusion_width = 105%
+first_layer_flow_ratio = 100%
+first_layer_height = 60%
+first_layer_infill_speed = 60
+first_layer_min_speed = 0
+first_layer_size_compensation = -0.1
+first_layer_size_compensation_layers = 1
+first_layer_speed = 40
+gap_fill = 1
+gap_fill_last = 1
+gap_fill_min_area = 100%
+gap_fill_overlap = 100%
+gap_fill_speed = 40
+gcode_comments = 0
+gcode_label_objects = 1
+hole_size_compensation = -0.05
+hole_size_threshold = 100
+hole_to_polyhole = 0
+hole_to_polyhole_threshold = 0.01
+hole_to_polyhole_twisted = 1
+infill_acceleration = 3000
+infill_anchor = 600%
+infill_anchor_max = 0
+infill_connection = connected
+infill_connection_bottom = connected
+infill_connection_solid = connected
+infill_connection_top = connected
+infill_dense = 1
+infill_dense_algo = autosmall
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_spacing = 
+infill_extrusion_width = 120%
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 50%
+infill_speed = 160
+inherits = 
+interface_shells = 0
+ironing = 0
+ironing_angle = -1
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
+layer_height = 0.3
+max_print_speed = 300
+max_volumetric_speed = 0
+milling_after_z = 200%
+milling_extra_size = 150%
+milling_post_process = 0
+milling_speed = 30
+min_skirt_length = 0
+min_width_top_surface = 200%
+model_precision = 0.0001
+no_perimeter_unsupported_algo = none
+notes = TODO: check the size of the extruder and the y-bar clearance. Optimize & test supports.
+only_one_perimeter_first_layer = 0
+only_one_perimeter_top = 1
+only_one_perimeter_top_other_algo = 0
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{nozzle_diameter[0]}N_{layer_height}L_{fill_density}F_{extrusion_multiplier}E_{filament_type[0]}_{print_time}.gcode
+over_bridge_flow_ratio = 120%
+overhangs_reverse = 0
+overhangs_reverse_threshold = 250%
+overhangs_speed = 40
+overhangs_width = 75%
+overhangs_width_speed = 50%
+perimeter_acceleration = 3000
+perimeter_bonding = 0%
+perimeter_extruder = 1
+perimeter_extrusion_spacing = 
+perimeter_extrusion_width = 100%
+perimeter_loop = 0
+perimeter_loop_seam = rear
+perimeter_overlap = 100%
+perimeter_round_corners = 0
+perimeter_speed = 120
+perimeters = 3
+post_process = 
+print_custom_variables = 
+print_extrusion_multiplier = 100%
+print_retract_length = -1
+print_retract_lift = -1
+print_settings_id = xk_0.3mm-0.6nozzle
+print_temperature = 0
+raft_layers = 0
+resolution = 0.002
+resolution_internal = 0.2
+seam_angle_cost = 100%
+seam_position = aligned
+seam_travel_cost = 100%
+single_extruder_multi_material_priming = 0
+skirt_brim = 0
+skirt_distance = 3
+skirt_distance_from_brim = 1
+skirt_extrusion_width = 0
+skirt_height = 1
+skirts = 3
+slice_closing_radius = 0.049
+small_perimeter_max_length = 20
+small_perimeter_min_length = 6
+small_perimeter_speed = 30
+solid_fill_pattern = monotonic
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_spacing = 
+solid_infill_extrusion_width = 120%
+solid_infill_speed = 80%
+solid_over_perimeters = 2
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_buildplate_only = 0
+support_material_contact_distance_bottom = 0.15
+support_material_contact_distance_top = 0.15
+support_material_contact_distance_type = filament
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 110%
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 1
+support_material_interface_pattern = sawtooth
+support_material_interface_spacing = 0.3
+support_material_interface_speed = 70
+support_material_pattern = rectilinear
+support_material_solid_first_layer = 1
+support_material_spacing = 2.5
+support_material_speed = 60
+support_material_synchronize_layers = 0
+support_material_threshold = 30
+support_material_with_sheath = 0
+support_material_xy_spacing = 75%
+thin_perimeters = 1
+thin_perimeters_all = 0
+thin_walls = 1
+thin_walls_merge = 1
+thin_walls_min_width = 50%
+thin_walls_overlap = 50%
+thin_walls_speed = 30
+threads = 8
+top_fill_pattern = monotonic
+top_infill_extrusion_spacing = 
+top_infill_extrusion_width = 100%
+top_solid_infill_speed = 60%
+top_solid_layers = 3
+top_solid_min_thickness = 0
+travel_acceleration = 1500
+travel_speed = 300
+travel_speed_z = 0
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_brim = 80%
+wipe_tower_no_sparse_layers = 1
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 30
+wipe_tower_y = 30
+xy_inner_size_compensation = 0
+xy_size_compensation = 0

print/xk-v2_0.8N_0.4L.ini

@@ -0,0 +1,233 @@
+# generated by SuperSlicer 2.3.57 on 2021-11-25 at 21:43:22 UTC
+allow_empty_layers = 0
+avoid_crossing_not_first_layer = 1
+avoid_crossing_perimeters = 0
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0
+bridge_acceleration = 3000
+bridge_angle = 0
+bridge_flow_ratio = 100%
+bridge_overlap = 100%
+bridge_overlap_min = 80%
+bridge_speed = 60
+bridge_speed_internal = 150%
+bridged_infill_margin = 200%
+brim_ears = 0
+brim_ears_detection_length = 1
+brim_ears_max_angle = 120
+brim_ears_pattern = concentric
+brim_inside_holes = 0
+brim_offset = 0
+brim_width = 0
+brim_width_interior = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.8
+complete_objects = 0
+complete_objects_one_brim = 0
+complete_objects_one_skirt = 0
+complete_objects_sort = object
+curve_smoothing_angle_concave = 0
+curve_smoothing_angle_convex = 0
+curve_smoothing_cutoff_dist = 2
+curve_smoothing_precision = 0
+default_acceleration = 3000
+dont_support_bridges = 1
+draft_shield = 0
+duplicate_distance = 5
+enforce_full_fill_volume = 1
+ensure_vertical_shell_thickness = 1
+exact_last_layer_height = 0
+external_infill_margin = 150%
+external_perimeter_cut_corners = 0%
+external_perimeter_extrusion_spacing = 
+external_perimeter_extrusion_width = 100%
+external_perimeter_overlap = 100%
+external_perimeter_speed = 50%
+external_perimeters_first = 0
+external_perimeters_hole = 1
+external_perimeters_nothole = 1
+external_perimeters_vase = 0
+extra_perimeters = 0
+extra_perimeters_odd_layers = 0
+extra_perimeters_overhangs = 0
+extruder_clearance_height = 2
+extruder_clearance_radius = 50
+extrusion_spacing = 
+extrusion_width = 100%
+fill_angle = 45
+fill_angle_increment = 0
+fill_density = 13%
+fill_pattern = gyroid
+fill_smooth_distribution = 14%
+fill_smooth_width = 50%
+fill_top_flow_ratio = 100%
+first_layer_acceleration = 2000
+first_layer_extrusion_spacing = 
+first_layer_extrusion_width = 105%
+first_layer_flow_ratio = 100%
+first_layer_height = 60%
+first_layer_infill_speed = 60
+first_layer_min_speed = 0
+first_layer_size_compensation = -0.1
+first_layer_size_compensation_layers = 1
+first_layer_speed = 40
+gap_fill = 1
+gap_fill_last = 1
+gap_fill_min_area = 100%
+gap_fill_overlap = 100%
+gap_fill_speed = 40
+gcode_comments = 0
+gcode_label_objects = 1
+hole_size_compensation = -0.05
+hole_size_threshold = 100
+hole_to_polyhole = 0
+hole_to_polyhole_threshold = 0.01
+hole_to_polyhole_twisted = 1
+infill_acceleration = 3000
+infill_anchor = 600%
+infill_anchor_max = 0
+infill_connection = connected
+infill_connection_bottom = connected
+infill_connection_solid = connected
+infill_connection_top = connected
+infill_dense = 1
+infill_dense_algo = autosmall
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_spacing = 
+infill_extrusion_width = 120%
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 50%
+infill_speed = 160
+inherits = 
+interface_shells = 0
+ironing = 0
+ironing_angle = -1
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
+layer_height = 0.4
+max_print_speed = 300
+max_volumetric_speed = 0
+milling_after_z = 200%
+milling_extra_size = 150%
+milling_post_process = 0
+milling_speed = 30
+min_skirt_length = 0
+min_width_top_surface = 200%
+model_precision = 0.0001
+no_perimeter_unsupported_algo = none
+notes = TODO: check the size of the extruder and the y-bar clearance. Optimize & test supports.
+only_one_perimeter_first_layer = 0
+only_one_perimeter_top = 1
+only_one_perimeter_top_other_algo = 0
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{nozzle_diameter[0]}N_{layer_height}L_{fill_density}F_{extrusion_multiplier}E_{filament_type[0]}_{print_time}.gcode
+over_bridge_flow_ratio = 120%
+overhangs_reverse = 0
+overhangs_reverse_threshold = 250%
+overhangs_speed = 40
+overhangs_width = 75%
+overhangs_width_speed = 50%
+perimeter_acceleration = 3000
+perimeter_bonding = 0%
+perimeter_extruder = 1
+perimeter_extrusion_spacing = 
+perimeter_extrusion_width = 100%
+perimeter_loop = 0
+perimeter_loop_seam = rear
+perimeter_overlap = 100%
+perimeter_round_corners = 0
+perimeter_speed = 120
+perimeters = 3
+post_process = 
+print_custom_variables = 
+print_extrusion_multiplier = 100%
+print_retract_length = -1
+print_retract_lift = -1
+print_settings_id = xk_0.2mm-0.4nozzle
+print_temperature = 0
+raft_layers = 0
+resolution = 0.002
+resolution_internal = 0.2
+seam_angle_cost = 100%
+seam_position = aligned
+seam_travel_cost = 100%
+single_extruder_multi_material_priming = 0
+skirt_brim = 0
+skirt_distance = 3
+skirt_distance_from_brim = 1
+skirt_extrusion_width = 0
+skirt_height = 1
+skirts = 3
+slice_closing_radius = 0.049
+small_perimeter_max_length = 20
+small_perimeter_min_length = 6
+small_perimeter_speed = 30
+solid_fill_pattern = monotonic
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_spacing = 
+solid_infill_extrusion_width = 120%
+solid_infill_speed = 80%
+solid_over_perimeters = 2
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_buildplate_only = 0
+support_material_contact_distance_bottom = 0.15
+support_material_contact_distance_top = 0.15
+support_material_contact_distance_type = filament
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 110%
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 1
+support_material_interface_pattern = sawtooth
+support_material_interface_spacing = 0.4
+support_material_interface_speed = 70
+support_material_pattern = rectilinear
+support_material_solid_first_layer = 1
+support_material_spacing = 2.5
+support_material_speed = 60
+support_material_synchronize_layers = 0
+support_material_threshold = 30
+support_material_with_sheath = 0
+support_material_xy_spacing = 75%
+thin_perimeters = 1
+thin_perimeters_all = 0
+thin_walls = 1
+thin_walls_merge = 1
+thin_walls_min_width = 50%
+thin_walls_overlap = 50%
+thin_walls_speed = 30
+threads = 8
+top_fill_pattern = monotonic
+top_infill_extrusion_spacing = 
+top_infill_extrusion_width = 100%
+top_solid_infill_speed = 60%
+top_solid_layers = 3
+top_solid_min_thickness = 0
+travel_acceleration = 1500
+travel_speed = 300
+travel_speed_z = 0
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_brim = 80%
+wipe_tower_no_sparse_layers = 1
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 30
+wipe_tower_y = 30
+xy_inner_size_compensation = 0
+xy_size_compensation = 0