konni/config_superslicer
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity

print: update

Browse source
This commit is contained in:
Konstantin Koslowski 2021-12-31 14:01:11 +01:00
parent 2cdfee0426
commit 1213849357
4 changed files with 483 additions and 13 deletions
Download patch file Download diff file Expand all files Collapse all files

12
print/xk_0.2mm-0.4nozzle.ini → print/xk-v2_0.4N_0.2L.ini
View file

@ -1,4 +1,4 @@
# generated by SuperSlicer 2.3.57 on 2021-11-21 at 15:06:29 UTC
# generated by SuperSlicer 2.3.57 on 2021-12-30 at 20:13:01 UTC
allow_empty_layers = 0
avoid_crossing_not_first_layer = 1
avoid_crossing_perimeters = 0
@ -10,6 +10,7 @@ bridge_acceleration = 3000
bridge_angle = 0
bridge_flow_ratio = 100%
bridge_overlap = 100%
bridge_overlap_min = 80%
bridge_speed = 60
bridge_speed_internal = 150%
bridged_infill_margin = 200%
@ -127,7 +128,7 @@ only_one_perimeter_top = 1
only_one_perimeter_top_other_algo = 0
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = {input_filename_base}_{nozzle_diameter[0]}N_{layer_height}L_{extrusion_multiplier}E_{filament_type[0]}_{print_time}.gcode
output_filename_format = {input_filename_base}_{nozzle_diameter[0]}N_{layer_height}L_{fill_density}F_{extrusion_multiplier}E_{filament_type[0]}_{print_time}.gcode
over_bridge_flow_ratio = 120%
overhangs_reverse = 0
overhangs_reverse_threshold = 250%
@ -144,7 +145,7 @@ perimeter_loop_seam = rear
perimeter_overlap = 100%
perimeter_round_corners = 0
perimeter_speed = 120
perimeters = 4
perimeters = 3
post_process =
print_custom_variables =
print_extrusion_multiplier = 100%
@ -154,6 +155,7 @@ print_settings_id = xk_0.2mm-0.4nozzle
print_temperature = 0
raft_layers = 0
resolution = 0.002
resolution_internal = 0.2
seam_angle_cost = 100%
seam_position = aligned
seam_travel_cost = 100%
@ -225,7 +227,7 @@ wipe_tower_brim = 80%
wipe_tower_no_sparse_layers = 1
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 30.6406
wipe_tower_y = 105.997
wipe_tower_x = 30
wipe_tower_y = 30
xy_inner_size_compensation = 0
xy_size_compensation = 0

18
print/xk_0.2mm-0.4nozzle-quality.ini → print/xk-v2_0.4N_0.2L_quality.ini
View file

@ -1,4 +1,4 @@
# generated by SuperSlicer 2.3.57 on 2021-11-22 at 21:09:59 UTC
# generated by SuperSlicer 2.3.57 on 2021-11-26 at 08:13:50 UTC
allow_empty_layers = 0
avoid_crossing_not_first_layer = 1
avoid_crossing_perimeters = 0
@ -10,6 +10,7 @@ bridge_acceleration = 3000
bridge_angle = 0
bridge_flow_ratio = 100%
bridge_overlap = 100%
bridge_overlap_min = 80%
bridge_speed = 60
bridge_speed_internal = 150%
bridged_infill_margin = 200%
@ -44,7 +45,7 @@ external_perimeter_cut_corners = 0%
external_perimeter_extrusion_spacing =
external_perimeter_extrusion_width = 100%
external_perimeter_overlap = 100%
external_perimeter_speed = 60
external_perimeter_speed = 50%
external_perimeters_first = 0
external_perimeters_hole = 1
external_perimeters_nothole = 1
@ -65,9 +66,9 @@ fill_smooth_width = 50%
fill_top_flow_ratio = 100%
first_layer_acceleration = 2000
first_layer_extrusion_spacing =
first_layer_extrusion_width = 105%
first_layer_extrusion_width = 120%
first_layer_flow_ratio = 100%
first_layer_height = 60%
first_layer_height = 75%
first_layer_infill_speed = 60
first_layer_min_speed = 0
first_layer_size_compensation = -0.1
@ -127,7 +128,7 @@ only_one_perimeter_top = 1
only_one_perimeter_top_other_algo = 0
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = {input_filename_base}_{nozzle_diameter[0]}N_{layer_height}L_{extrusion_multiplier}E_{filament_type[0]}_{print_time}.gcode
output_filename_format = {input_filename_base}_{nozzle_diameter[0]}N_{layer_height}L_{fill_density}F_{extrusion_multiplier}E_{filament_type[0]}_{print_time}.gcode
over_bridge_flow_ratio = 120%
overhangs_reverse = 0
overhangs_reverse_threshold = 250%
@ -144,7 +145,7 @@ perimeter_loop_seam = rear
perimeter_overlap = 100%
perimeter_round_corners = 0
perimeter_speed = 90
perimeters = 4
perimeters = 3
post_process =
print_custom_variables =
print_extrusion_multiplier = 100%
@ -154,6 +155,7 @@ print_settings_id = xk_0.2mm-0.4nozzle
print_temperature = 0
raft_layers = 0
resolution = 0.002
resolution_internal = 0.2
seam_angle_cost = 100%
seam_position = aligned
seam_travel_cost = 100%
@ -225,7 +227,7 @@ wipe_tower_brim = 80%
wipe_tower_no_sparse_layers = 1
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 56.5035
wipe_tower_y = 103.036
wipe_tower_x = 30
wipe_tower_y = 30
xy_inner_size_compensation = 0
xy_size_compensation = 0

233
print/xk-v2_0.6N_0.3L.ini Normal file
View file

@ -0,0 +1,233 @@
# generated by SuperSlicer 2.3.57 on 2021-11-25 at 21:44:56 UTC
allow_empty_layers = 0
avoid_crossing_not_first_layer = 1
avoid_crossing_perimeters = 0
avoid_crossing_perimeters_max_detour = 0
bottom_fill_pattern = monotonic
bottom_solid_layers = 3
bottom_solid_min_thickness = 0
bridge_acceleration = 3000
bridge_angle = 0
bridge_flow_ratio = 100%
bridge_overlap = 100%
bridge_overlap_min = 80%
bridge_speed = 60
bridge_speed_internal = 150%
bridged_infill_margin = 200%
brim_ears = 0
brim_ears_detection_length = 1
brim_ears_max_angle = 120
brim_ears_pattern = concentric
brim_inside_holes = 0
brim_offset = 0
brim_width = 0
brim_width_interior = 0
clip_multipart_objects = 1
compatible_printers =
compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.6
complete_objects = 0
complete_objects_one_brim = 0
complete_objects_one_skirt = 0
complete_objects_sort = object
curve_smoothing_angle_concave = 0
curve_smoothing_angle_convex = 0
curve_smoothing_cutoff_dist = 2
curve_smoothing_precision = 0
default_acceleration = 3000
dont_support_bridges = 1
draft_shield = 0
duplicate_distance = 5
enforce_full_fill_volume = 1
ensure_vertical_shell_thickness = 1
exact_last_layer_height = 0
external_infill_margin = 150%
external_perimeter_cut_corners = 0%
external_perimeter_extrusion_spacing =
external_perimeter_extrusion_width = 100%
external_perimeter_overlap = 100%
external_perimeter_speed = 50%
external_perimeters_first = 0
external_perimeters_hole = 1
external_perimeters_nothole = 1
external_perimeters_vase = 0
extra_perimeters = 0
extra_perimeters_odd_layers = 0
extra_perimeters_overhangs = 0
extruder_clearance_height = 2
extruder_clearance_radius = 50
extrusion_spacing =
extrusion_width = 100%
fill_angle = 45
fill_angle_increment = 0
fill_density = 13%
fill_pattern = gyroid
fill_smooth_distribution = 14%
fill_smooth_width = 50%
fill_top_flow_ratio = 100%
first_layer_acceleration = 2000
first_layer_extrusion_spacing =
first_layer_extrusion_width = 105%
first_layer_flow_ratio = 100%
first_layer_height = 60%
first_layer_infill_speed = 60
first_layer_min_speed = 0
first_layer_size_compensation = -0.1
first_layer_size_compensation_layers = 1
first_layer_speed = 40
gap_fill = 1
gap_fill_last = 1
gap_fill_min_area = 100%
gap_fill_overlap = 100%
gap_fill_speed = 40
gcode_comments = 0
gcode_label_objects = 1
hole_size_compensation = -0.05
hole_size_threshold = 100
hole_to_polyhole = 0
hole_to_polyhole_threshold = 0.01
hole_to_polyhole_twisted = 1
infill_acceleration = 3000
infill_anchor = 600%
infill_anchor_max = 0
infill_connection = connected
infill_connection_bottom = connected
infill_connection_solid = connected
infill_connection_top = connected
infill_dense = 1
infill_dense_algo = autosmall
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_spacing =
infill_extrusion_width = 120%
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 50%
infill_speed = 160
inherits =
interface_shells = 0
ironing = 0
ironing_angle = -1
ironing_flowrate = 15%
ironing_spacing = 0.1
ironing_speed = 15
ironing_type = top
layer_height = 0.3
max_print_speed = 300
max_volumetric_speed = 0
milling_after_z = 200%
milling_extra_size = 150%
milling_post_process = 0
milling_speed = 30
min_skirt_length = 0
min_width_top_surface = 200%
model_precision = 0.0001
no_perimeter_unsupported_algo = none
notes = TODO: check the size of the extruder and the y-bar clearance. Optimize & test supports.
only_one_perimeter_first_layer = 0
only_one_perimeter_top = 1
only_one_perimeter_top_other_algo = 0
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = {input_filename_base}_{nozzle_diameter[0]}N_{layer_height}L_{fill_density}F_{extrusion_multiplier}E_{filament_type[0]}_{print_time}.gcode
over_bridge_flow_ratio = 120%
overhangs_reverse = 0
overhangs_reverse_threshold = 250%
overhangs_speed = 40
overhangs_width = 75%
overhangs_width_speed = 50%
perimeter_acceleration = 3000
perimeter_bonding = 0%
perimeter_extruder = 1
perimeter_extrusion_spacing =
perimeter_extrusion_width = 100%
perimeter_loop = 0
perimeter_loop_seam = rear
perimeter_overlap = 100%
perimeter_round_corners = 0
perimeter_speed = 120
perimeters = 3
post_process =
print_custom_variables =
print_extrusion_multiplier = 100%
print_retract_length = -1
print_retract_lift = -1
print_settings_id = xk_0.3mm-0.6nozzle
print_temperature = 0
raft_layers = 0
resolution = 0.002
resolution_internal = 0.2
seam_angle_cost = 100%
seam_position = aligned
seam_travel_cost = 100%
single_extruder_multi_material_priming = 0
skirt_brim = 0
skirt_distance = 3
skirt_distance_from_brim = 1
skirt_extrusion_width = 0
skirt_height = 1
skirts = 3
slice_closing_radius = 0.049
small_perimeter_max_length = 20
small_perimeter_min_length = 6
small_perimeter_speed = 30
solid_fill_pattern = monotonic
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_spacing =
solid_infill_extrusion_width = 120%
solid_infill_speed = 80%
solid_over_perimeters = 2
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 0
support_material_auto = 1
support_material_buildplate_only = 0
support_material_contact_distance_bottom = 0.15
support_material_contact_distance_top = 0.15
support_material_contact_distance_type = filament
support_material_enforce_layers = 0
support_material_extruder = 0
support_material_extrusion_width = 110%
support_material_interface_contact_loops = 0
support_material_interface_extruder = 0
support_material_interface_layers = 1
support_material_interface_pattern = sawtooth
support_material_interface_spacing = 0.3
support_material_interface_speed = 70
support_material_pattern = rectilinear
support_material_solid_first_layer = 1
support_material_spacing = 2.5
support_material_speed = 60
support_material_synchronize_layers = 0
support_material_threshold = 30
support_material_with_sheath = 0
support_material_xy_spacing = 75%
thin_perimeters = 1
thin_perimeters_all = 0
thin_walls = 1
thin_walls_merge = 1
thin_walls_min_width = 50%
thin_walls_overlap = 50%
thin_walls_speed = 30
threads = 8
top_fill_pattern = monotonic
top_infill_extrusion_spacing =
top_infill_extrusion_width = 100%
top_solid_infill_speed = 60%
top_solid_layers = 3
top_solid_min_thickness = 0
travel_acceleration = 1500
travel_speed = 300
travel_speed_z = 0
wipe_tower = 1
wipe_tower_bridging = 10
wipe_tower_brim = 80%
wipe_tower_no_sparse_layers = 1
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 30
wipe_tower_y = 30
xy_inner_size_compensation = 0
xy_size_compensation = 0

233
print/xk-v2_0.8N_0.4L.ini Normal file
View file

@ -0,0 +1,233 @@
# generated by SuperSlicer 2.3.57 on 2021-11-25 at 21:43:22 UTC
allow_empty_layers = 0
avoid_crossing_not_first_layer = 1
avoid_crossing_perimeters = 0
avoid_crossing_perimeters_max_detour = 0
bottom_fill_pattern = monotonic
bottom_solid_layers = 3
bottom_solid_min_thickness = 0
bridge_acceleration = 3000
bridge_angle = 0
bridge_flow_ratio = 100%
bridge_overlap = 100%
bridge_overlap_min = 80%
bridge_speed = 60
bridge_speed_internal = 150%
bridged_infill_margin = 200%
brim_ears = 0
brim_ears_detection_length = 1
brim_ears_max_angle = 120
brim_ears_pattern = concentric
brim_inside_holes = 0
brim_offset = 0
brim_width = 0
brim_width_interior = 0
clip_multipart_objects = 1
compatible_printers =
compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.8
complete_objects = 0
complete_objects_one_brim = 0
complete_objects_one_skirt = 0
complete_objects_sort = object
curve_smoothing_angle_concave = 0
curve_smoothing_angle_convex = 0
curve_smoothing_cutoff_dist = 2
curve_smoothing_precision = 0
default_acceleration = 3000
dont_support_bridges = 1
draft_shield = 0
duplicate_distance = 5
enforce_full_fill_volume = 1
ensure_vertical_shell_thickness = 1
exact_last_layer_height = 0
external_infill_margin = 150%
external_perimeter_cut_corners = 0%
external_perimeter_extrusion_spacing =
external_perimeter_extrusion_width = 100%
external_perimeter_overlap = 100%
external_perimeter_speed = 50%
external_perimeters_first = 0
external_perimeters_hole = 1
external_perimeters_nothole = 1
external_perimeters_vase = 0
extra_perimeters = 0
extra_perimeters_odd_layers = 0
extra_perimeters_overhangs = 0
extruder_clearance_height = 2
extruder_clearance_radius = 50
extrusion_spacing =
extrusion_width = 100%
fill_angle = 45
fill_angle_increment = 0
fill_density = 13%
fill_pattern = gyroid
fill_smooth_distribution = 14%
fill_smooth_width = 50%
fill_top_flow_ratio = 100%
first_layer_acceleration = 2000
first_layer_extrusion_spacing =
first_layer_extrusion_width = 105%
first_layer_flow_ratio = 100%
first_layer_height = 60%
first_layer_infill_speed = 60
first_layer_min_speed = 0
first_layer_size_compensation = -0.1
first_layer_size_compensation_layers = 1
first_layer_speed = 40
gap_fill = 1
gap_fill_last = 1
gap_fill_min_area = 100%
gap_fill_overlap = 100%
gap_fill_speed = 40
gcode_comments = 0
gcode_label_objects = 1
hole_size_compensation = -0.05
hole_size_threshold = 100
hole_to_polyhole = 0
hole_to_polyhole_threshold = 0.01
hole_to_polyhole_twisted = 1
infill_acceleration = 3000
infill_anchor = 600%
infill_anchor_max = 0
infill_connection = connected
infill_connection_bottom = connected
infill_connection_solid = connected
infill_connection_top = connected
infill_dense = 1
infill_dense_algo = autosmall
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_spacing =
infill_extrusion_width = 120%
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 50%
infill_speed = 160
inherits =
interface_shells = 0
ironing = 0
ironing_angle = -1
ironing_flowrate = 15%
ironing_spacing = 0.1
ironing_speed = 15
ironing_type = top
layer_height = 0.4
max_print_speed = 300
max_volumetric_speed = 0
milling_after_z = 200%
milling_extra_size = 150%
milling_post_process = 0
milling_speed = 30
min_skirt_length = 0
min_width_top_surface = 200%
model_precision = 0.0001
no_perimeter_unsupported_algo = none
notes = TODO: check the size of the extruder and the y-bar clearance. Optimize & test supports.
only_one_perimeter_first_layer = 0
only_one_perimeter_top = 1
only_one_perimeter_top_other_algo = 0
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = {input_filename_base}_{nozzle_diameter[0]}N_{layer_height}L_{fill_density}F_{extrusion_multiplier}E_{filament_type[0]}_{print_time}.gcode
over_bridge_flow_ratio = 120%
overhangs_reverse = 0
overhangs_reverse_threshold = 250%
overhangs_speed = 40
overhangs_width = 75%
overhangs_width_speed = 50%
perimeter_acceleration = 3000
perimeter_bonding = 0%
perimeter_extruder = 1
perimeter_extrusion_spacing =
perimeter_extrusion_width = 100%
perimeter_loop = 0
perimeter_loop_seam = rear
perimeter_overlap = 100%
perimeter_round_corners = 0
perimeter_speed = 120
perimeters = 3
post_process =
print_custom_variables =
print_extrusion_multiplier = 100%
print_retract_length = -1
print_retract_lift = -1
print_settings_id = xk_0.2mm-0.4nozzle
print_temperature = 0
raft_layers = 0
resolution = 0.002
resolution_internal = 0.2
seam_angle_cost = 100%
seam_position = aligned
seam_travel_cost = 100%
single_extruder_multi_material_priming = 0
skirt_brim = 0
skirt_distance = 3
skirt_distance_from_brim = 1
skirt_extrusion_width = 0
skirt_height = 1
skirts = 3
slice_closing_radius = 0.049
small_perimeter_max_length = 20
small_perimeter_min_length = 6
small_perimeter_speed = 30
solid_fill_pattern = monotonic
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_spacing =
solid_infill_extrusion_width = 120%
solid_infill_speed = 80%
solid_over_perimeters = 2
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 0
support_material_auto = 1
support_material_buildplate_only = 0
support_material_contact_distance_bottom = 0.15
support_material_contact_distance_top = 0.15
support_material_contact_distance_type = filament
support_material_enforce_layers = 0
support_material_extruder = 0
support_material_extrusion_width = 110%
support_material_interface_contact_loops = 0
support_material_interface_extruder = 0
support_material_interface_layers = 1
support_material_interface_pattern = sawtooth
support_material_interface_spacing = 0.4
support_material_interface_speed = 70
support_material_pattern = rectilinear
support_material_solid_first_layer = 1
support_material_spacing = 2.5
support_material_speed = 60
support_material_synchronize_layers = 0
support_material_threshold = 30
support_material_with_sheath = 0
support_material_xy_spacing = 75%
thin_perimeters = 1
thin_perimeters_all = 0
thin_walls = 1
thin_walls_merge = 1
thin_walls_min_width = 50%
thin_walls_overlap = 50%
thin_walls_speed = 30
threads = 8
top_fill_pattern = monotonic
top_infill_extrusion_spacing =
top_infill_extrusion_width = 100%
top_solid_infill_speed = 60%
top_solid_layers = 3
top_solid_min_thickness = 0
travel_acceleration = 1500
travel_speed = 300
travel_speed_z = 0
wipe_tower = 1
wipe_tower_bridging = 10
wipe_tower_brim = 80%
wipe_tower_no_sparse_layers = 1
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 30
wipe_tower_y = 30
xy_inner_size_compensation = 0
xy_size_compensation = 0