filament: update

filament/CR3D ABS.ini

@@ -0,0 +1,83 @@
+# generated by SuperSlicer 2.3.57 on 2021-12-31 at 12:57:30 UTC
+bed_temperature = 100
+bridge_fan_speed = 55
+bridge_internal_fan_speed = -1
+chamber_temperature = 0
+compatible_printers = 
+compatible_printers_condition = 
+compatible_prints = 
+compatible_prints_condition = 
+cooling = 1
+disable_fan_first_layers = 2
+end_filament_gcode = "; Filament-specific end gcode EsunABS+"
+external_perimeter_fan_speed = -1
+extrusion_multiplier = 0.94
+fan_always_on = 1
+fan_below_layer_time = 10
+filament_colour = #424242
+filament_cooling_final_speed = 50
+filament_cooling_initial_speed = 10
+filament_cooling_moves = 5
+filament_cooling_zone_pause = 0
+filament_cost = 20
+filament_custom_variables = ""
+filament_density = 1.05
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_dip_extraction_speed = 70
+filament_dip_insertion_speed = 33
+filament_enable_toolchange_part_fan = 0
+filament_enable_toolchange_temp = 0
+filament_load_time = 30
+filament_loading_speed = 14
+filament_loading_speed_start = 19
+filament_max_overlap = 100%
+filament_max_speed = 0
+filament_max_volumetric_speed = 25
+filament_max_wipe_tower_speed = 200
+filament_melt_zone_pause = 0
+filament_minimal_purge_on_wipe_tower = 150
+filament_notes = ""
+filament_ramming_parameters = "120 110 5.56452 5.6129 5.69355 5.93548 6.5 7.29032 8.06452 8.72581 9.30645 9.79032 10.1129 10.2581| 0.05 5.56775 0.45 5.63874 0.95 6.05808 1.45 7.59034 1.95 8.95803 2.45 9.93557 2.95 10.3096 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_seam_gap = nil
+filament_settings_id = EsunABS+
+filament_shrink = 100%
+filament_skinnydip_distance = 42
+filament_soluble = 0
+filament_spool_weight = 1000
+filament_toolchange_delay = 0
+filament_toolchange_part_fan_speed = 50
+filament_toolchange_temp = 240
+filament_type = ABS
+filament_unload_time = 30
+filament_unloading_speed = 20
+filament_unloading_speed_start = 100
+filament_use_fast_skinnydip = 0
+filament_use_skinnydip = 1
+filament_vendor = Esun
+filament_wipe = nil
+filament_wipe_advanced_pigment = 0.4
+filament_wipe_extra_perimeter = nil
+filament_wipe_only_crossing = nil
+filament_wipe_speed = nil
+first_layer_bed_temperature = 105
+first_layer_temperature = 250
+full_fan_speed_layer = 0
+inherits = 
+max_fan_speed = 50
+max_speed_reduction = 90%
+min_fan_speed = 30
+min_print_speed = 15
+slowdown_below_layer_time = 20
+start_filament_gcode = "; Filament-specific start gcode EsunABS+\nM107 S{min_fan_speed}"
+temperature = 250
+top_fan_speed = -1

filament/EsunABS+.ini

@@ -1,6 +1,6 @@
-# generated by SuperSlicer 2.3.57 on 2021-11-21 at 17:52:16 UTC
+# generated by SuperSlicer 2.3.57 on 2021-12-08 at 21:46:02 UTC
 bed_temperature = 100
-bridge_fan_speed = 60
+bridge_fan_speed = 55
 bridge_internal_fan_speed = -1
 chamber_temperature = 0
 compatible_printers = 
@@ -8,12 +8,12 @@ compatible_printers_condition =
 compatible_prints = 
 compatible_prints_condition = 
 cooling = 1
-disable_fan_first_layers = 3
+disable_fan_first_layers = 2
 end_filament_gcode = "; Filament-specific end gcode EsunABS+"
 external_perimeter_fan_speed = -1
 extrusion_multiplier = 0.95
-fan_always_on = 0
+fan_always_on = 1
-fan_below_layer_time = 20
+fan_below_layer_time = 10
 filament_colour = #424242
 filament_cooling_final_speed = 50
 filament_cooling_initial_speed = 10
@@ -33,7 +33,7 @@ filament_loading_speed = 14
 filament_loading_speed_start = 19
 filament_max_overlap = 100%
 filament_max_speed = 0
-filament_max_volumetric_speed = 17
+filament_max_volumetric_speed = 25
 filament_max_wipe_tower_speed = 200
 filament_melt_zone_pause = 0
 filament_minimal_purge_on_wipe_tower = 150
@@ -67,6 +67,7 @@ filament_vendor = Esun
 filament_wipe = nil
 filament_wipe_advanced_pigment = 0.4
 filament_wipe_extra_perimeter = nil
+filament_wipe_only_crossing = nil
 filament_wipe_speed = nil
 first_layer_bed_temperature = 105
 first_layer_temperature = 250
@@ -74,9 +75,9 @@ full_fan_speed_layer = 0
 inherits = 
 max_fan_speed = 50
 max_speed_reduction = 90%
-min_fan_speed = 0
+min_fan_speed = 30
 min_print_speed = 15
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "; Filament-specific start gcode EsunABS+\nM107 S{min_fan_speed}"
 temperature = 250
 top_fan_speed = -1

filament/PETG.ini

@@ -0,0 +1,82 @@
+# generated by SuperSlicer 2.3.57 on 2021-12-24 at 20:09:22 UTC
+bed_temperature = 75
+bridge_fan_speed = 100
+bridge_internal_fan_speed = -1
+chamber_temperature = 0
+compatible_printers = 
+compatible_printers_condition = 
+compatible_prints = 
+compatible_prints_condition = 
+cooling = 1
+disable_fan_first_layers = 0
+end_filament_gcode = "; Filament-specific end gcode PLA"
+external_perimeter_fan_speed = -1
+extrusion_multiplier = 0.93
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #15A800
+filament_cooling_final_speed = 50
+filament_cooling_initial_speed = 10
+filament_cooling_moves = 5
+filament_cooling_zone_pause = 0
+filament_cost = 20
+filament_custom_variables = ""
+filament_density = 1.05
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_dip_extraction_speed = 70
+filament_dip_insertion_speed = 33
+filament_enable_toolchange_part_fan = 0
+filament_enable_toolchange_temp = 0
+filament_load_time = 30
+filament_loading_speed = 14
+filament_loading_speed_start = 19
+filament_max_overlap = 100%
+filament_max_speed = 0
+filament_max_volumetric_speed = 17
+filament_max_wipe_tower_speed = 200
+filament_melt_zone_pause = 0
+filament_minimal_purge_on_wipe_tower = 150
+filament_notes = ""
+filament_ramming_parameters = "120 110 5.56452 5.6129 5.69355 5.93548 6.5 7.29032 8.06452 8.72581 9.30645 9.79032 10.1129 10.2581| 0.05 5.56775 0.45 5.63874 0.95 6.05808 1.45 7.59034 1.95 8.95803 2.45 9.93557 2.95 10.3096 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_seam_gap = nil
+filament_settings_id = "Esun ABS+ _Ette_Pigm0.4"
+filament_shrink = 100%
+filament_skinnydip_distance = 42
+filament_soluble = 0
+filament_spool_weight = 0
+filament_toolchange_delay = 0
+filament_toolchange_part_fan_speed = 50
+filament_toolchange_temp = 240
+filament_type = PET
+filament_unload_time = 30
+filament_unloading_speed = 20
+filament_unloading_speed_start = 100
+filament_use_fast_skinnydip = 0
+filament_use_skinnydip = 1
+filament_vendor = Esun
+filament_wipe = nil
+filament_wipe_advanced_pigment = 0.4
+filament_wipe_extra_perimeter = nil
+filament_wipe_speed = nil
+first_layer_bed_temperature = 80
+first_layer_temperature = 240
+full_fan_speed_layer = 0
+inherits = 
+max_fan_speed = 100
+max_speed_reduction = 90%
+min_fan_speed = 100
+min_print_speed = 15
+slowdown_below_layer_time = 5
+start_filament_gcode = "; Filament-specific start gcode PLA\nM107 S{min_fan_speed}"
+temperature = 230
+top_fan_speed = -1