printer: update

printer/xk-v2-ercf_0.4N.ini

@@ -1,18 +1,18 @@
-# generated by SuperSlicer 2.3.57 on 2021-11-24 at 21:23:51 UTC
+# generated by SuperSlicer 2.3.57 on 2021-12-28 at 15:56:23 UTC
 bed_custom_model = /home/koslowski/.config/SuperSlicer/printer/voron-v2-printbed_300.stl
 bed_custom_texture = /home/koslowski/.config/SuperSlicer/printer/voron-v2-printbed-logo-blue_300.png
 bed_shape = 0x0,300x0,300x300,0x300
-before_layer_gcode = ;BEFORE_LAYER_CHANGE [layer_z]\n\n
+before_layer_gcode = ;BEFORE_LAYER_CHANGE [layer_z]\nTIMELAPSE_TAKE_FRAME\n\n
 between_objects_gcode = 
 color_change_gcode = M600
 cooling_tube_length = 15
 cooling_tube_retraction = 35
-default_filament_profile = "EsunABS+"
+default_filament_profile = EsunABS+
 default_print_profile = xk_0.2mm-0.4nozzle
 deretract_speed = 0,0,0,0,0,0
 end_gcode = print_end UNLOAD_AT_END=1
 extra_loading_move = -51.8
-extruder_colour = #202020;#1C71D8;#C01C28;#26A269;#E5A50A;#FFFFFF
+extruder_colour = #202020;#1C71D8;#C01C28;#26A269;#E5A50A;#F6F5F4
 extruder_fan_offset = 0%,0%,0%,0%,0%,0%
 extruder_offset = 0x0,0x0,0x0,0x0,0x0,0x0
 extruder_temperature_offset = 0,0,0,0,0,0
@@ -34,7 +34,7 @@ machine_limits_usage = time_estimate_only
 machine_max_acceleration_e = 10000
 machine_max_acceleration_extruding = 1500
 machine_max_acceleration_retracting = 1500
-machine_max_acceleration_travel = 1500,1250
+machine_max_acceleration_travel = 3000,1250
 machine_max_acceleration_x = 9000
 machine_max_acceleration_y = 9000
 machine_max_acceleration_z = 500
@@ -89,7 +89,7 @@ retract_speed = 35,35,35,35,35,35
 seam_gap = 15%,15%,15%,15%,15%,15%
 silent_mode = 0
 single_extruder_multi_material = 1
-start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\nM140 S0\nprint_start BED=[first_layer_bed_temperature] EXTRUDER={first_layer_temperature[initial_extruder] + extruder_temperature_offset[initial_extruder]} CHAMBER=[chamber_temperature] QGL=0 BMC=0 PURGE=1 SOAK=0 Z_ADJUST=0 ERCF=1 ERCF_EXTRUDER={initial_extruder}
+start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\nM140 S0\nprint_start BED=[first_layer_bed_temperature] EXTRUDER={first_layer_temperature[initial_extruder] + extruder_temperature_offset[initial_extruder]} SHEET=default BMC=0 PURGE=1 Z_ADJUST=0 ERCF=1 ERCF_EXTRUDER={initial_extruder}
 start_gcode_manual = 1
 template_custom_gcode = 
 thumbnails = 64x64,256x256

printer/xk-v2_0.4N.ini

@@ -1,13 +1,13 @@
-# generated by SuperSlicer 2.3.57 on 2021-11-24 at 21:23:40 UTC
+# generated by SuperSlicer 2.3.57 on 2021-11-26 at 08:10:17 UTC
-bed_custom_model = /home/koslowski/.config/SuperSlicer/printer/voron-v2-printbed_300.stl
+bed_custom_model = /home/konni/.config/SuperSlicer/printer/voron-v2-printbed_300.stl
-bed_custom_texture = /home/koslowski/.config/SuperSlicer/printer/voron-v2-printbed-logo-blue_300.png
+bed_custom_texture = /home/konni/.config/SuperSlicer/printer/voron-v2-printbed-logo-blue_300.png
 bed_shape = 0x0,300x0,300x300,0x300
 before_layer_gcode = ;BEFORE_LAYER_CHANGE [layer_z]\n\n
 between_objects_gcode = 
 color_change_gcode = M600
 cooling_tube_length = 15
 cooling_tube_retraction = 35
-default_filament_profile = "EsunABS+"
+default_filament_profile = EsunABS+
 default_print_profile = xk_0.2mm-0.4nozzle
 deretract_speed = 0
 end_gcode = print_end UNLOAD_AT_END=0
@@ -34,7 +34,7 @@ machine_limits_usage = time_estimate_only
 machine_max_acceleration_e = 10000
 machine_max_acceleration_extruding = 1500
 machine_max_acceleration_retracting = 1500
-machine_max_acceleration_travel = 1500,1250
+machine_max_acceleration_travel = 3000,1250
 machine_max_acceleration_x = 9000
 machine_max_acceleration_y = 9000
 machine_max_acceleration_z = 500
@@ -49,7 +49,7 @@ machine_max_jerk_z = 0.2
 machine_min_extruding_rate = 0
 machine_min_travel_rate = 0
 max_gcode_per_second = 1500
-max_layer_height = 0.3
+max_layer_height = 75%
 max_print_height = 290
 milling_diameter = 
 milling_toolchange_end_gcode = 
@@ -89,7 +89,7 @@ retract_speed = 35
 seam_gap = 15%
 silent_mode = 0
 single_extruder_multi_material = 1
-start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\nM140 S0\nprint_start BED=[first_layer_bed_temperature] EXTRUDER={first_layer_temperature[initial_extruder] + extruder_temperature_offset[initial_extruder]} CHAMBER=[chamber_temperature] QGL=0 BMC=0 PURGE=1 SOAK=0 Z_ADJUST=0 ERCF=0 ERCF_EXTRUDER={initial_extruder}
+start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\nM140 S0\nprint_start BED=[first_layer_bed_temperature] EXTRUDER={first_layer_temperature[initial_extruder] + extruder_temperature_offset[initial_extruder]} SHEET=default BMC=0 PURGE=1 Z_ADJUST=0 ERCF=0 ERCF_EXTRUDER={initial_extruder}
 start_gcode_manual = 1
 template_custom_gcode = 
 thumbnails = 64x64,256x256

printer/xk-v2_0.6N.ini

@@ -0,0 +1,115 @@
+# generated by SuperSlicer 2.3.57 on 2021-11-26 at 08:10:26 UTC
+bed_custom_model = /home/konni/.config/SuperSlicer/printer/voron-v2-printbed_300.stl
+bed_custom_texture = /home/konni/.config/SuperSlicer/printer/voron-v2-printbed-logo-blue_300.png
+bed_shape = 0x0,300x0,300x300,0x300
+before_layer_gcode = ;BEFORE_LAYER_CHANGE [layer_z]\n\n
+between_objects_gcode = 
+color_change_gcode = M600
+cooling_tube_length = 15
+cooling_tube_retraction = 35
+default_filament_profile = EsunABS+
+default_print_profile = xk_0.2mm-0.4nozzle
+deretract_speed = 0
+end_gcode = print_end UNLOAD_AT_END=0
+extra_loading_move = -51.8
+extruder_colour = #202020
+extruder_fan_offset = 0%
+extruder_offset = 0x0
+extruder_temperature_offset = 0
+fan_kickstart = 0
+fan_percentage = 0
+fan_speedup_overhangs = 1
+fan_speedup_time = 0
+feature_gcode = 
+gcode_filename_illegal_char = 
+gcode_flavor = klipper
+gcode_precision_e = 5
+gcode_precision_xyz = 3
+high_current_on_filament_swap = 0
+host_type = octoprint
+inherits = 
+layer_gcode = ;AFTER_LAYER_CHANGE [layer_z]\nprint_layer_change LAYER=[layer_num] LAYER_Z=[layer_z] TOTAL_LAYER_COUNT=[total_layer_count]
+lift_min = 0
+machine_limits_usage = time_estimate_only
+machine_max_acceleration_e = 10000
+machine_max_acceleration_extruding = 1500
+machine_max_acceleration_retracting = 1500
+machine_max_acceleration_travel = 3000,1250
+machine_max_acceleration_x = 9000
+machine_max_acceleration_y = 9000
+machine_max_acceleration_z = 500
+machine_max_feedrate_e = 120
+machine_max_feedrate_x = 500
+machine_max_feedrate_y = 500
+machine_max_feedrate_z = 12
+machine_max_jerk_e = 2.5
+machine_max_jerk_x = 10
+machine_max_jerk_y = 10
+machine_max_jerk_z = 0.2
+machine_min_extruding_rate = 0
+machine_min_travel_rate = 0
+max_gcode_per_second = 1500
+max_layer_height = 75%
+max_print_height = 290
+milling_diameter = 
+milling_toolchange_end_gcode = 
+milling_toolchange_start_gcode = 
+milling_z_lift = 
+min_layer_height = 0.04
+min_length = 0.035
+nozzle_diameter = 0.6
+parking_pos_retraction = 52
+pause_print_gcode = M601
+print_host = 
+printer_custom_variables = 
+printer_model = Voron_v2_300_aferburner
+printer_notes = Unoffical profile, for now.\nE3DV6
+printer_settings_id = xk_v2
+printer_technology = FFF
+printer_variant = 0.4
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+printhost_port = 
+remaining_times = 1
+remaining_times_type = m73
+retract_before_travel = 3
+retract_before_wipe = 0%
+retract_layer_change = 0
+retract_length = 0.75
+retract_length_toolchange = 10
+retract_lift = 0.2
+retract_lift_above = 0
+retract_lift_below = 290
+retract_lift_first_layer = 0
+retract_lift_top = "All surfaces"
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 35
+seam_gap = 15%
+silent_mode = 0
+single_extruder_multi_material = 1
+start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\nM140 S0\nprint_start BED=[first_layer_bed_temperature] EXTRUDER={first_layer_temperature[initial_extruder] + extruder_temperature_offset[initial_extruder]} SHEET=default BMC=0 PURGE=1 Z_ADJUST=0 ERCF=0 ERCF_EXTRUDER={initial_extruder}
+start_gcode_manual = 1
+template_custom_gcode = 
+thumbnails = 64x64,256x256
+thumbnails_color = #018aff
+thumbnails_custom_color = 0
+thumbnails_end_file = 0
+thumbnails_with_bed = 1
+time_estimation_compensation = 110%
+tool_name = ""
+toolchange_gcode = T[next_extruder]
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 0
+wipe_advanced = 1
+wipe_advanced_algo = quadra
+wipe_advanced_multiplier = 60
+wipe_advanced_nozzle_melted_volume = 200
+wipe_extra_perimeter = 0
+wipe_speed = 0
+z_offset = 0.04
+z_step = 0.005

printer/xk-v2_0.8N.ini

@@ -0,0 +1,115 @@
+# generated by SuperSlicer 2.3.57 on 2021-11-26 at 08:09:34 UTC
+bed_custom_model = /home/konni/.config/SuperSlicer/printer/voron-v2-printbed_300.stl
+bed_custom_texture = /home/konni/.config/SuperSlicer/printer/voron-v2-printbed-logo-blue_300.png
+bed_shape = 0x0,300x0,300x300,0x300
+before_layer_gcode = ;BEFORE_LAYER_CHANGE [layer_z]\n\n
+between_objects_gcode = 
+color_change_gcode = M600
+cooling_tube_length = 15
+cooling_tube_retraction = 35
+default_filament_profile = EsunABS+
+default_print_profile = xk_0.2mm-0.4nozzle
+deretract_speed = 0
+end_gcode = print_end UNLOAD_AT_END=0
+extra_loading_move = -51.8
+extruder_colour = #202020
+extruder_fan_offset = 0%
+extruder_offset = 0x0
+extruder_temperature_offset = 0
+fan_kickstart = 0
+fan_percentage = 0
+fan_speedup_overhangs = 1
+fan_speedup_time = 0
+feature_gcode = 
+gcode_filename_illegal_char = 
+gcode_flavor = klipper
+gcode_precision_e = 5
+gcode_precision_xyz = 3
+high_current_on_filament_swap = 0
+host_type = octoprint
+inherits = 
+layer_gcode = ;AFTER_LAYER_CHANGE [layer_z]\nprint_layer_change LAYER=[layer_num] LAYER_Z=[layer_z] TOTAL_LAYER_COUNT=[total_layer_count]
+lift_min = 0
+machine_limits_usage = time_estimate_only
+machine_max_acceleration_e = 10000
+machine_max_acceleration_extruding = 1500
+machine_max_acceleration_retracting = 1500
+machine_max_acceleration_travel = 3000,1250
+machine_max_acceleration_x = 9000
+machine_max_acceleration_y = 9000
+machine_max_acceleration_z = 500
+machine_max_feedrate_e = 120
+machine_max_feedrate_x = 500
+machine_max_feedrate_y = 500
+machine_max_feedrate_z = 12
+machine_max_jerk_e = 2.5
+machine_max_jerk_x = 10
+machine_max_jerk_y = 10
+machine_max_jerk_z = 0.2
+machine_min_extruding_rate = 0
+machine_min_travel_rate = 0
+max_gcode_per_second = 1500
+max_layer_height = 75%
+max_print_height = 290
+milling_diameter = 
+milling_toolchange_end_gcode = 
+milling_toolchange_start_gcode = 
+milling_z_lift = 
+min_layer_height = 0.04
+min_length = 0.035
+nozzle_diameter = 0.8
+parking_pos_retraction = 52
+pause_print_gcode = M601
+print_host = 
+printer_custom_variables = 
+printer_model = Voron_v2_300_aferburner
+printer_notes = Unoffical profile, for now.\nE3DV6
+printer_settings_id = xk_v2
+printer_technology = FFF
+printer_variant = 0.4
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+printhost_port = 
+remaining_times = 1
+remaining_times_type = m73
+retract_before_travel = 3
+retract_before_wipe = 0%
+retract_layer_change = 0
+retract_length = 0.75
+retract_length_toolchange = 10
+retract_lift = 0.2
+retract_lift_above = 0
+retract_lift_below = 290
+retract_lift_first_layer = 0
+retract_lift_top = "All surfaces"
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 35
+seam_gap = 15%
+silent_mode = 0
+single_extruder_multi_material = 1
+start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\nM140 S0\nprint_start BED=[first_layer_bed_temperature] EXTRUDER={first_layer_temperature[initial_extruder] + extruder_temperature_offset[initial_extruder]} SHEET=default BMC=0 PURGE=1 Z_ADJUST=0 ERCF=0 ERCF_EXTRUDER={initial_extruder}
+start_gcode_manual = 1
+template_custom_gcode = 
+thumbnails = 64x64,256x256
+thumbnails_color = #018aff
+thumbnails_custom_color = 0
+thumbnails_end_file = 0
+thumbnails_with_bed = 1
+time_estimation_compensation = 110%
+tool_name = ""
+toolchange_gcode = T[next_extruder]
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 0
+wipe_advanced = 1
+wipe_advanced_algo = quadra
+wipe_advanced_multiplier = 60
+wipe_advanced_nozzle_melted_volume = 200
+wipe_extra_perimeter = 0
+wipe_speed = 0
+z_offset = 0.04
+z_step = 0.005

printer/xk_v2_quick.ini

@@ -1,3 +0,0 @@
-# foo
-inherits = xk_v2
-printer_settings_id = xk_v2_quick