konni/klipper_config
1
0
Fork 0
Code Pull requests Releases Activity

v2.4: reformat file

Browse source
This commit is contained in:
Konstantin Koslowski 2021-09-23 10:48:50 +02:00
parent f3e2e9bc3d
commit 4b5981cbe3
1 changed files with 105 additions and 105 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

26
printer.cfg
View file

@ -34,6 +34,7 @@ serial: /dev/serial/by-id/usb-Klipper_stm32f446xx_1E0030000E5053424E363620-if00
kinematics: corexy
max_velocity: 300
max_accel: 3000 # Max 4000
max_accel_to_decel: 1500 # default half of max_accel
max_z_velocity: 25 # Max 15 for 12V TMC Drivers, can increase for 24V
max_z_accel: 350
square_corner_velocity: 5.0
@ -64,7 +65,7 @@ dir_pin: !PF12
enable_pin: !PF14
rotation_distance: 40
microsteps: 16
full_steps_per_rotation: 400 # 200: 1.8 deg stepper, 400: 0.9 deg stepper
full_steps_per_rotation: 400 # 1.8 deg stepper: 200, 0.9 deg stepper
endstop_pin: PG6
position_min: 0
position_endstop: 300
@ -209,7 +210,7 @@ rotation_distance: 22.6789511 #Bondtech 5mm Drive Gears
## Use 80:20 for M4, M3.1
gear_ratio: 50:17 # BMG Gear Ratio
microsteps: 16
full_steps_per_rotation: 200 #200 for 1.8 degree, 400 for 0.9 degree
full_steps_per_rotation: 200 # 1.8 deg stepper: 200, 0.9 deg stepper
nozzle_diameter: 0.400
filament_diameter: 1.75
heater_pin: PA2
@ -445,7 +446,6 @@ gcode:
SET_LED LED=btt_mini12864 RED=1 GREEN=0 BLUE=0 INDEX=2 TRANSMIT=0
SET_LED LED=btt_mini12864 RED=1 GREEN=0 BLUE=0 INDEX=3
#*# <---------------------- SAVE_CONFIG ---------------------->
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
#*#
@ -464,21 +464,21 @@ gcode:
#*# [bed_mesh default]
#*# version = 1
#*# points =
#*# 0.382500, 0.377500, 0.370000, 0.357500, 0.337500
#*# 0.340000, 0.330000, 0.305000, 0.305000, 0.295000
#*# 0.342500, 0.342500, 0.325000, 0.305000, 0.270000
#*# 0.335000, 0.350000, 0.327500, 0.322500, 0.307500
#*# 0.382500, 0.407500, 0.392500, 0.382500, 0.355000
#*# 0.085000, 0.102500, 0.075000, 0.080000, 0.060000
#*# 0.057500, 0.062500, 0.020000, 0.032500, 0.035000
#*# 0.027500, 0.035000, 0.000000, 0.000000, -0.007500
#*# 0.020000, 0.032500, -0.005000, 0.017500, 0.020000
#*# 0.072500, 0.085000, 0.045000, 0.057500, 0.057500
#*# tension = 0.2
#*# min_x = 25.0
#*# min_x = 40.0
#*# algo = bicubic
#*# y_count = 5
#*# mesh_y_pps = 2
#*# min_y = 25.0
#*# min_y = 40.0
#*# x_count = 5
#*# max_y = 287.0
#*# max_y = 260.0
#*# mesh_x_pps = 2
#*# max_x = 261.0
#*# max_x = 260.0
#*#
#*# [stepper_z]
#*# position_endstop = 0.542
#*# position_endstop = 0.642