konni/klipper_config
1
0
Fork 0
Code Pull requests Releases Activity

printer: update some variables

Browse source
This commit is contained in:
Konstantin Koslowski 2022-04-28 10:52:01 +02:00
parent 5659912ae9
commit 8ceb08e917
1 changed files with 17 additions and 18 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

35
printer.cfg
View file

@ -39,7 +39,7 @@ max_velocity: 600
## regular ## regular
max_accel: 4000 max_accel: 4000
max_accel_to_decel: 2000 max_accel_to_decel: 2000
# resonance testing ## resonance testing
# max_accel: 10000 # max_accel: 10000
# max_accel_to_decel: 5000 # max_accel_to_decel: 5000
## ##
@ -105,7 +105,7 @@ microsteps: 32
full_steps_per_rotation: 400 # 200: 1.8 deg stepper, 400: 0.9 deg stepper full_steps_per_rotation: 400 # 200: 1.8 deg stepper, 400: 0.9 deg stepper
endstop_pin: PG9 endstop_pin: PG9
position_min: 0 position_min: 0
position_endstop: 307 position_endstop: 308
position_max: 310 position_max: 310
homing_speed: 30 # Max 100 homing_speed: 30 # Max 100
homing_retract_dist: 5 homing_retract_dist: 5
@ -133,7 +133,7 @@ gear_ratio: 80:16
microsteps: 32 microsteps: 32
endstop_pin: PG10 endstop_pin: PG10
## actual_position = measured_position_endstop - position_endstop ## actual_position = measured_position_endstop - position_endstop
position_endstop: 0.5 position_endstop: 0
position_max: 290 position_max: 290
position_min: -1 position_min: -1
homing_speed: 8.0 # speed: mm/sec, feedrate: mm/min homing_speed: 8.0 # speed: mm/sec, feedrate: mm/min
@ -220,11 +220,10 @@ full_steps_per_rotation: 200 # 1.8 deg stepper: 200, 0.9 deg stepper
nozzle_diameter: 0.400 nozzle_diameter: 0.400
filament_diameter: 1.75 filament_diameter: 1.75
heater_pin: PA2 heater_pin: PA2
## Validate the following thermistor type to make sure it is correct sensor_type: ATC Semitec 104NT-4-R025H42G
sensor_type: ATC Semitec 104GT-2
sensor_pin: PF4 sensor_pin: PF4
min_temp: 10 min_temp: 10
max_temp: 270 max_temp: 280 # specified to 300
max_power: 1.0 max_power: 1.0
min_extrude_temp: 170 min_extrude_temp: 170
#control = pid #control = pid
@ -232,7 +231,7 @@ min_extrude_temp: 170
#pid_ki = 1.304 #pid_ki = 1.304
#pid_kd = 131.721 #pid_kd = 131.721
## Try to keep pressure_advance below 1.0 ## Try to keep pressure_advance below 1.0
pressure_advance: 0.05 # pressure_advance: 0.05
## Default is 0.040, leave stock ## Default is 0.040, leave stock
pressure_advance_smooth_time: 0.040 pressure_advance_smooth_time: 0.040
# Maximum length (in mm of raw filament) that a retraction or # Maximum length (in mm of raw filament) that a retraction or
@ -308,7 +307,7 @@ timeout: 1800
## replaced with homing_override in klicky-probe.cfg ## replaced with homing_override in klicky-probe.cfg
# [safe_z_home] # [safe_z_home]
# ## XY Location of the Z Endstop Switch # ## XY Location of the Z Endstop Switch
# home_xy_position: 94.5, 305 # home_xy_position: 94, 306
# speed: 100 # speed: 100
# z_hop: 10 # z_hop: 10
# z_hop_speed: 25 # z_hop_speed: 25
@ -381,20 +380,20 @@ max_adjust: 10
#*# #*#
#*# [extruder] #*# [extruder]
#*# control = pid #*# control = pid
#*# pid_kp = 27.862 #*# pid_kp = 19.058
#*# pid_ki = 1.548 #*# pid_ki = 1.495
#*# pid_kd = 125.379 #*# pid_kd = 60.749
#*# #*#
#*# [bed_mesh default] #*# [bed_mesh default]
#*# version = 1 #*# version = 1
#*# points = #*# points =
#*# -0.005000, -0.018750, -0.012500, -0.015000, -0.015000, 0.002500, 0.002500 #*# 0.053750, 0.030000, 0.036250, 0.028750, 0.031250, 0.055000, 0.053750
#*# 0.008750, -0.006250, 0.000000, -0.012500, -0.008750, 0.015000, 0.007500 #*# 0.031250, 0.011250, 0.022500, 0.008750, 0.012500, 0.037500, 0.026250
#*# -0.005000, -0.020000, -0.006250, -0.011250, -0.007500, 0.007500, 0.005000 #*# 0.008750, -0.012500, -0.002500, 0.008750, -0.008750, 0.001250, -0.005000
#*# 0.007500, -0.006250, 0.010000, 0.000000, 0.005000, 0.018750, 0.011250 #*# -0.000000, -0.011250, 0.008750, 0.000000, 0.002500, 0.006250, -0.007500
#*# 0.006250, -0.006250, 0.006250, 0.011250, 0.015000, 0.025000, 0.018750 #*# 0.012500, 0.001250, 0.005000, -0.006250, -0.003750, 0.006250, -0.006250
#*# 0.003750, -0.005000, 0.001250, -0.001250, 0.003750, 0.017500, 0.008750 #*# 0.002500, -0.005000, 0.001250, -0.002500, -0.000000, 0.008750, -0.000000
#*# 0.026250, 0.018750, 0.016250, 0.020000, 0.025000, 0.032500, 0.025000 #*# 0.035000, 0.026250, 0.026250, 0.031250, 0.026250, 0.040000, 0.025000
#*# tension = 0.2 #*# tension = 0.2
#*# min_x = 40.0 #*# min_x = 40.0
#*# algo = bicubic #*# algo = bicubic