konni/klipper_config
1
0
Fork 0
Code Pull requests Releases Activity

printer: update for cw2

Browse source
This commit is contained in:
Konstantin Koslowski 2022-08-05 12:48:49 +02:00
parent 87a32ec148
commit e5f8e72164
1 changed files with 13 additions and 11 deletions
Download patch file Download diff file Expand all files Collapse all files

24
printer.cfg
View file

@ -210,7 +210,7 @@ stealthchop_threshold: 0
# E0 on MOTOR6 # E0 on MOTOR6
[extruder] [extruder]
step_pin: PE2 step_pin: PE2
dir_pin: PE3 dir_pin: !PE3
enable_pin: !PD4 enable_pin: !PD4
## Update value below when you perform extruder calibration ## Update value below when you perform extruder calibration
## If you ask for 100mm of filament, but in reality it is 98mm: ## If you ask for 100mm of filament, but in reality it is 98mm:
@ -218,11 +218,12 @@ enable_pin: !PD4
## 22.6789511 is a good starting point ## 22.6789511 is a good starting point
rotation_distance: 22.6789511 #Bondtech 5mm Drive Gears rotation_distance: 22.6789511 #Bondtech 5mm Drive Gears
## Update Gear Ratio depending on your Extruder Type ## Update Gear Ratio depending on your Extruder Type
## Use 50:17 for Afterburner/Clockwork (BMG Gear Ratio) ## - 50:17 for Afterburner/Clockwork
## Use 80:20 for M4, M3.1 ## - 50:10 for Stealthburner/Clockwork2
gear_ratio: 50:17 # BMG Gear Ratio ## - 80:20 for M4, M3.1
gear_ratio: 50:10 # SB BMG
microsteps: 32 microsteps: 32
full_steps_per_rotation: 200 # 1.8 deg stepper: 200, 0.9 deg stepper full_steps_per_rotation: 200 # 1.8 deg stepper: 200, 0.9 deg stepper: 400
nozzle_diameter: 0.400 nozzle_diameter: 0.400
filament_diameter: 1.75 filament_diameter: 1.75
heater_pin: PA2 heater_pin: PA2
@ -295,12 +296,13 @@ max_temp: 100
# gcode_id: C # gcode_id: C
[temperature_sensor chamber] ## replaced, there is no thermistor on the stealthburner pcb
sensor_type: chamber # [temperature_sensor chamber]
sensor_pin: PF5 # sensor_type: chamber
min_temp: 0 # sensor_pin: PF5
max_temp: 100 # min_temp: 0
gcode_id: C # max_temp: 100
# gcode_id: C
[temperature_sensor RPI] [temperature_sensor RPI]
sensor_type: temperature_host sensor_type: temperature_host