konni/klipper_config
1
0
Fork 0
Code Pull requests Releases Activity

v2.4: fix movement directions

Browse source
This commit is contained in:
Konstantin Koslowski 2021-09-21 21:55:26 +02:00
parent 9a1adc99ef
commit fda0feede8
1 changed files with 3 additions and 3 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

6
printer.cfg
View file

@ -36,7 +36,7 @@ serial: /dev/serial/by-id/usb-Klipper_stm32f446xx_1E0030000E5053424E363620-if00
kinematics: corexy
max_velocity: 300
max_accel: 3000 #Max 4000
max_z_velocity: 15 #Max 15 for 12V TMC Drivers, can increase for 24V
max_z_velocity: 25 #Max 15 for 12V TMC Drivers, can increase for 24V
max_z_accel: 350
square_corner_velocity: 5.0
@ -230,7 +230,7 @@ stealthchop_threshold: 0
# E0 on MOTOR6
[extruder]
step_pin: PE2
dir_pin: PE3
dir_pin: !PE3
enable_pin: !PD4
## Update value below when you perform extruder calibration
## If you ask for 100mm of filament, but in reality it is 98mm:
@ -298,7 +298,7 @@ pid_kd: 363.769
[probe]
## Inductive Probe
## This probe is not used for Z height, only Quad Gantry Leveling
pin: ~!PB7
pin: ~PB7
x_offset: 0
y_offset: 25.0
z_offset: 0